[U-Boot] [PATCH 2/3] OMAP3: overo: Move ethernet CS4 configuration to execute based on board id

[Steve Sakoman]

On Tue, Oct 11, 2011 at 2:23 PM, Philip Balister <philip at balister.org> wrote:
> By moving the CS4 configuration into the board specific configuration, it
> is left free for custom carrier boards. The USRP-E1XX series uses
> CS4 to control access to an FPGA, so without this patch the device driver
> cannot claim CS4.
>
> Signed-off-by: Philip Balister <philip at opensdr.com>

Tested-by: Steve Sakoman <steve at sakoman.com>