[U-Boot] [PATCH 1/2] Tegra2: Make XTal speed configurable

Simon Glass sjg at chromium.org
Wed Oct 12 02:30:57 CEST 2011


Hi Marek,

On Wed, Oct 5, 2011 at 10:05 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> On Wednesday, October 05, 2011 04:10:56 PM Simon Glass wrote:
>> Hi Marek,
>>
>> On Fri, Sep 30, 2011 at 5:12 PM, Marek Vasut <marek.vasut at gmail.com> wrote:
>> > The Toradex T20 module uses 13MHz Xtal, so make the Xtal speed
>> > configurable.
>> >
>> > Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
>> > Cc: Simon Glass <sjg at chromium.org>
>> > Cc: Ben Warren <biggerbadderben at gmail.com>
>> > Cc: Tom Warren <twarren.nvidia at gmail.com>
>> > Cc: Stephen Warren <swarren at nvidia.com>
>> > ---
>> >  arch/arm/cpu/armv7/tegra2/ap20.c |    9 +++++++--
>> >  1 files changed, 7 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c
>> > b/arch/arm/cpu/armv7/tegra2/ap20.c index dc5f984..71d9f26 100644
>> > --- a/arch/arm/cpu/armv7/tegra2/ap20.c
>> > +++ b/arch/arm/cpu/armv7/tegra2/ap20.c
>> > @@ -31,6 +31,11 @@
>> >  #include <asm/arch/scu.h>
>> >  #include <common.h>
>> >
>> > +/* The default XTal is 12MHz, some boards might use 13MHz one though */
>> > +#ifndef        CONFIG_SYS_TEGRA2_XTAL_MHZ
>> > +#define        CONFIG_SYS_TEGRA2_XTAL_MHZ      12
>> > +#endif
>> > +
>> >  u32 s_first_boot = 1;
>> >
>> >  void init_pllx(void)
>> > @@ -46,8 +51,8 @@ void init_pllx(void)
>> >        /* Set PLLX_MISC */
>> >        writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc);
>> >
>> > -       /* Use 12MHz clock here */
>> > -       reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT);
>> > +       /* Use 13MHz clock here */
>>
>> Change comment?
>>
>> > +       reg = PLL_BYPASS_MASK | (CONFIG_SYS_TEGRA2_XTAL_MHZ <<
>> > PLL_DIVM_SHIFT); reg |= 1000 << PLL_DIVN_SHIFT;
>> >        writel(reg, &pll->pll_base);
>> >
>> > --
>> > 1.7.5.4
>>
>> Regards,
>> Simon
>
> Hi Simon, I'll probably also change the board.c to support this. But then, can't
> the board.c be moved to arch/arm/cpu/armv7/tegra... and it's functions exported
> via standard header ? Cheers
>

Which board.c do you mean and which change do you need to make?

Regards,
Simon


More information about the U-Boot mailing list