[U-Boot] [PATCH 1/4] arm, davinci: Rename AM1808 lowlevel functions to DA850
Christian Riesch
christian.riesch at omicron.at
Wed Oct 12 13:31:17 CEST 2011
Rename arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c and
arch/arm/include/asm/arch-davinci/am1808_lowlevel.h to da850_lowlevel.c
and da850_lowlevel.h since they apply not only to the AM1808 SoC
but to all DA850 chips. The function names and #defines are changed
likewise.
Signed-off-by: Christian Riesch <christian.riesch at omicron.at>
Cc: Heiko Schocher <hs at denx.de>
Cc: Paulraj Sandeep <s-paulraj at ti.com>
Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
arch/arm/cpu/arm926ejs/davinci/Makefile | 2 +-
arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 --------------------
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 428 ++++++++++++++++++++
.../arm/include/asm/arch-davinci/am1808_lowlevel.h | 44 --
arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 44 ++
board/enbw/enbw_cmc/enbw_cmc.c | 2 +-
include/configs/enbw_cmc.h | 92 +++---
7 files changed, 520 insertions(+), 520 deletions(-)
delete mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
delete mode 100644 arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
create mode 100644 arch/arm/include/asm/arch-davinci/da850_lowlevel.h
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index d91a2b8..b2152df 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS-y += cpu.o timer.o psc.o
-COBJS-$(CONFIG_AM1808_LOWLEVEL) += am1808_lowlevel.o
+COBJS-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
deleted file mode 100644
index 1ea4a9f..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * SoC-specific lowlevel code for AM1808 and similar chips
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <common.h>
-#include <nand.h>
-#include <ns16550.h>
-#include <post.h>
-#include <asm/arch/am1808_lowlevel.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/ddr2_defs.h>
-#include <asm/arch/emif_defs.h>
-
-void am1808_waitloop(unsigned long loopcnt)
-{
- unsigned long i;
-
- for (i = 0; i < loopcnt; i++)
- asm(" NOP");
-}
-
-int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
-{
- if (reg == davinci_pllc0_regs)
- /* Unlock PLL registers. */
- clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
-
- /*
- * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
- * through MMR
- */
- clrbits_le32(®->pllctl, 0x00000020);
- /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
- clrbits_le32(®->pllctl, 0x00000200);
-
- /* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(®->pllctl, 0x00000001);
-
- am1808_waitloop(150);
-
- if (reg == davinci_pllc0_regs) {
- /*
- * Select the Clock Mode bit 8 as External Clock or On Chip
- * Oscilator
- */
- dv_maskbits(®->pllctl, 0xFFFFFEFF);
- setbits_le32(®->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
- }
-
- /* Clear PLLRST bit to reset the PLL */
- clrbits_le32(®->pllctl, 0x00000008);
-
- /* Disable the PLL output */
- setbits_le32(®->pllctl, 0x00000010);
-
- /* PLL initialization sequence */
- /*
- * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
- * power down bit
- */
- clrbits_le32(®->pllctl, 0x00000002);
-
- /* Enable the PLL from Disable Mode PLLDIS bit to 0 */
- clrbits_le32(®->pllctl, 0x00000010);
-
- /* Program the required multiplier value in PLLM */
- writel(pllmult, ®->pllm);
-
- /* program the postdiv */
- if (reg == davinci_pllc0_regs)
- writel((0x8000 | CONFIG_SYS_AM1808_PLL0_POSTDIV),
- ®->postdiv);
- else
- writel((0x8000 | CONFIG_SYS_AM1808_PLL1_POSTDIV),
- ®->postdiv);
-
- /*
- * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
- * no GO operation is currently in progress
- */
- while ((readl(®->pllstat) & 0x1) == 1)
- ;
-
- if (reg == davinci_pllc0_regs) {
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV1, ®->plldiv1);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV2, ®->plldiv2);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV3, ®->plldiv3);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV4, ®->plldiv4);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV5, ®->plldiv5);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV6, ®->plldiv6);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV7, ®->plldiv7);
- } else {
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV1, ®->plldiv1);
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV2, ®->plldiv2);
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV3, ®->plldiv3);
- }
-
- /*
- * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
- * transition.
- */
- setbits_le32(®->pllcmd, 0x01);
-
- /*
- * Wait for the GOSTAT bit in PLLSTAT to clear to 0
- * (completion of phase alignment).
- */
- while ((readl(®->pllstat) & 0x1) == 1)
- ;
-
- /* Wait for PLL to reset properly. See PLL spec for PLL reset time */
- am1808_waitloop(200);
-
- /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
- setbits_le32(®->pllctl, 0x00000008);
-
- /* Wait for PLL to lock. See PLL spec for PLL lock time */
- am1808_waitloop(2400);
-
- /*
- * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
- * mode
- */
- setbits_le32(®->pllctl, 0x00000001);
-
-
- /*
- * clear EMIFA and EMIFB clock source settings, let them
- * run off SYSCLK
- */
- if (reg == davinci_pllc0_regs)
- dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
-
- return 0;
-}
-
-void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
- unsigned char domain, unsigned char state)
-{
- struct davinci_psc_regs *reg;
- dv_reg_p mdstat, mdctl;
-
- if (pscnum == 0) {
- reg = davinci_psc0_regs;
- mdstat = ®->psc0.mdstat[module];
- mdctl = ®->psc0.mdctl[module];
- } else {
- reg = davinci_psc1_regs;
- mdstat = ®->psc1.mdstat[module];
- mdctl = ®->psc1.mdctl[module];
- }
-
- /* Wait for any outstanding transition to complete */
- while ((readl(®->ptstat) & (0x00000001 << domain)))
- ;
-
- /* If we are already in that state, just return */
- if ((readl(mdstat) & 0x1F) == state)
- return;
-
- /* Perform transition */
- writel((readl(mdctl) & 0xFFFFFFE0) | state, mdctl);
- setbits_le32(®->ptcmd, (0x00000001 << domain));
-
- /* Wait for transition to complete */
- while (readl(®->ptstat) & (0x00000001 << domain))
- ;
-
- /* Wait and verify the state */
- while ((readl(mdstat) & 0x1F) != state)
- ;
-}
-
-int am1808_ddr_setup(unsigned int freq)
-{
- unsigned long tmp;
-
- /* Enable the Clock to DDR2/mDDR */
- am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
-
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
- if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
- /* Begin VTP Calibration */
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
-
- /* Polling READY bit to see when VTP calibration is done */
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
- while ((tmp & VTP_READY) != VTP_READY)
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
-
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
-
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
- }
-
- writel(CONFIG_SYS_AM1808_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
- clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
- (1 << DDR_SLEW_CMOSEN_BIT));
-
- setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
-
- writel((CONFIG_SYS_AM1808_DDR2_SDBCR & ~0xf0000000) |
- (readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/
- &dv_ddr2_regs_ctrl->sdbcr);
- writel(CONFIG_SYS_AM1808_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
-
- writel(CONFIG_SYS_AM1808_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
- writel(CONFIG_SYS_AM1808_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
-
- clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr,
- (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT));
-
- /*
- * LPMODEN and MCLKSTOPEN must be set!
- * Without this bits set, PSC don;t switch states !!
- */
- writel(CONFIG_SYS_AM1808_DDR2_SDRCR |
- (1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
- (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
- &dv_ddr2_regs_ctrl->sdrcr);
-
- /* SyncReset the Clock to EMIF3A SDRAM */
- am1808_lpc_transition(1, 6, 0, PSC_SYNCRESET);
- /* Enable the Clock to EMIF3A SDRAM */
- am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
-
- /* disable self refresh */
- clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
- writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
-
- return 0;
-}
-
-static void am1808_set_mdctl(dv_reg_p mdctl)
-{
- if ((readl(mdctl) & 0x1F) != PSC_ENABLE)
- writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl);
-}
-
-void am1808_psc_init(void)
-{
- struct davinci_psc_regs *reg;
- int i;
-
- /* PSC 0 domain 0 init */
- reg = davinci_psc0_regs;
- while ((readl(®->ptstat) & 0x00000001))
- ;
-
- for (i = 3; i <= 4 ; i++)
- am1808_set_mdctl(®->psc0.mdctl[i]);
-
- for (i = 7; i <= 12 ; i++)
- am1808_set_mdctl(®->psc0.mdctl[i]);
-
- /* Do Always-On Power Domain Transitions */
- setbits_le32(®->ptcmd, 0x00000001);
- while (readl(®->ptstat) & 0x00000001)
- ;
-
- /* PSC1, domain 1 init */
- reg = davinci_psc1_regs;
- while ((readl(®->ptstat) & 0x00000001))
- ;
-
- am1808_set_mdctl(®->psc1.mdctl[3]);
- am1808_set_mdctl(®->psc1.mdctl[6]);
-
- /* UART1 + UART2 */
- for (i = 12 ; i <= 13 ; i++)
- am1808_set_mdctl(®->psc1.mdctl[i]);
-
- am1808_set_mdctl(®->psc1.mdctl[26]);
- am1808_set_mdctl(®->psc1.mdctl[31]);
-
- /* Do Always-On Power Domain Transitions */
- setbits_le32(®->ptcmd, 0x00000001);
- while (readl(®->ptstat) & 0x00000001)
- ;
-}
-
-void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
- unsigned long value)
-{
- clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
- setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
-}
-
-__attribute__((weak))
-void board_gpio_init(void)
-{
- return;
-}
-
-#if defined(CONFIG_NAND_SPL)
-void nand_boot(void)
-{
- __attribute__((noreturn)) void (*uboot)(void);
-
- /* copy image from NOR to RAM */
- memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
- (void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
- CONFIG_SYS_NAND_U_BOOT_SIZE);
-
- /* and jump to it ... */
- uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
- (*uboot)();
-}
-#endif
-
-#if defined(CONFIG_NAND_SPL)
-void board_init_f(ulong bootflag)
-#else
-int arch_cpu_init(void)
-#endif
-{
- /*
- * copied from arch/arm/cpu/arm926ejs/start.S
- *
- * flush v4 I/D caches
- */
- asm("mov r0, #0");
- asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
- asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- asm("mrc p15, 0, r0, c1, c0, 0");
- /* clear bits 13, 9:8 (--V- --RS) */
- asm("bic r0, r0, #0x00002300");
- /* clear bits 7, 2:0 (B--- -CAM) */
- asm("bic r0, r0, #0x00000087");
- /* set bit 2 (A) Align */
- asm("orr r0, r0, #0x00000002");
- /* set bit 12 (I) I-Cache */
- asm("orr r0, r0, #0x00001000");
- asm("mcr p15, 0, r0, c1, c0, 0");
-
- /* Unlock kick registers */
- writel(0x83e70b13, &davinci_syscfg_regs->kick0);
- writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
-
- dv_maskbits(&davinci_syscfg_regs->suspsrc,
- ((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
-
- /* System PSC setup - enable all */
- am1808_psc_init();
-
- /* Setup Pinmux */
- am1808_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX0);
- am1808_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX1);
- am1808_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX2);
- am1808_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX3);
- am1808_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX4);
- am1808_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX5);
- am1808_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX6);
- am1808_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX7);
- am1808_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX8);
- am1808_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX9);
- am1808_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX10);
- am1808_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX11);
- am1808_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX12);
- am1808_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX13);
- am1808_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX14);
- am1808_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX15);
- am1808_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX16);
- am1808_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX17);
- am1808_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX18);
- am1808_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX19);
-
- /* PLL setup */
- am1808_pll_init(davinci_pllc0_regs, CONFIG_SYS_AM1808_PLL0_PLLM);
- am1808_pll_init(davinci_pllc1_regs, CONFIG_SYS_AM1808_PLL1_PLLM);
-
- /* GPIO setup */
- board_gpio_init();
-
- /* setup CSn config */
- writel(CONFIG_SYS_AM1808_CS2CFG, &davinci_emif_regs->ab1cr);
- writel(CONFIG_SYS_AM1808_CS3CFG, &davinci_emif_regs->ab2cr);
-
- am1808_lpc_transition(1, 13, 0, PSC_ENABLE);
- NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
- /*
- * Fix Power and Emulation Management Register
- * see sprufw3a.pdf page 37 Table 24
- */
- writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
- (CONFIG_SYS_NS16550_COM1 + 0x30));
-#if defined(CONFIG_NAND_SPL)
- puts("ddr init\n");
- am1808_ddr_setup(132);
-
- puts("boot u-boot ...\n");
-
- nand_boot();
-#else
- am1808_ddr_setup(132);
- return 0;
-#endif
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
new file mode 100644
index 0000000..a6f0178
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -0,0 +1,428 @@
+/*
+ * SoC-specific lowlevel code for DA850
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <nand.h>
+#include <ns16550.h>
+#include <post.h>
+#include <asm/arch/da850_lowlevel.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/ddr2_defs.h>
+#include <asm/arch/emif_defs.h>
+
+void da850_waitloop(unsigned long loopcnt)
+{
+ unsigned long i;
+
+ for (i = 0; i < loopcnt; i++)
+ asm(" NOP");
+}
+
+int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
+{
+ if (reg == davinci_pllc0_regs)
+ /* Unlock PLL registers. */
+ clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
+
+ /*
+ * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
+ * through MMR
+ */
+ clrbits_le32(®->pllctl, 0x00000020);
+ /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
+ clrbits_le32(®->pllctl, 0x00000200);
+
+ /* Set PLLEN=0 => PLL BYPASS MODE */
+ clrbits_le32(®->pllctl, 0x00000001);
+
+ da850_waitloop(150);
+
+ if (reg == davinci_pllc0_regs) {
+ /*
+ * Select the Clock Mode bit 8 as External Clock or On Chip
+ * Oscilator
+ */
+ dv_maskbits(®->pllctl, 0xFFFFFEFF);
+ setbits_le32(®->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
+ }
+
+ /* Clear PLLRST bit to reset the PLL */
+ clrbits_le32(®->pllctl, 0x00000008);
+
+ /* Disable the PLL output */
+ setbits_le32(®->pllctl, 0x00000010);
+
+ /* PLL initialization sequence */
+ /*
+ * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
+ * power down bit
+ */
+ clrbits_le32(®->pllctl, 0x00000002);
+
+ /* Enable the PLL from Disable Mode PLLDIS bit to 0 */
+ clrbits_le32(®->pllctl, 0x00000010);
+
+ /* Program the required multiplier value in PLLM */
+ writel(pllmult, ®->pllm);
+
+ /* program the postdiv */
+ if (reg == davinci_pllc0_regs)
+ writel((0x8000 | CONFIG_SYS_DA850_PLL0_POSTDIV),
+ ®->postdiv);
+ else
+ writel((0x8000 | CONFIG_SYS_DA850_PLL1_POSTDIV),
+ ®->postdiv);
+
+ /*
+ * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
+ * no GO operation is currently in progress
+ */
+ while ((readl(®->pllstat) & 0x1) == 1)
+ ;
+
+ if (reg == davinci_pllc0_regs) {
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, ®->plldiv1);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, ®->plldiv2);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, ®->plldiv3);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, ®->plldiv4);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, ®->plldiv5);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, ®->plldiv6);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, ®->plldiv7);
+ } else {
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, ®->plldiv1);
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, ®->plldiv2);
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, ®->plldiv3);
+ }
+
+ /*
+ * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
+ * transition.
+ */
+ setbits_le32(®->pllcmd, 0x01);
+
+ /*
+ * Wait for the GOSTAT bit in PLLSTAT to clear to 0
+ * (completion of phase alignment).
+ */
+ while ((readl(®->pllstat) & 0x1) == 1)
+ ;
+
+ /* Wait for PLL to reset properly. See PLL spec for PLL reset time */
+ da850_waitloop(200);
+
+ /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
+ setbits_le32(®->pllctl, 0x00000008);
+
+ /* Wait for PLL to lock. See PLL spec for PLL lock time */
+ da850_waitloop(2400);
+
+ /*
+ * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
+ * mode
+ */
+ setbits_le32(®->pllctl, 0x00000001);
+
+
+ /*
+ * clear EMIFA and EMIFB clock source settings, let them
+ * run off SYSCLK
+ */
+ if (reg == davinci_pllc0_regs)
+ dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
+
+ return 0;
+}
+
+void da850_lpc_transition(unsigned char pscnum, unsigned char module,
+ unsigned char domain, unsigned char state)
+{
+ struct davinci_psc_regs *reg;
+ dv_reg_p mdstat, mdctl;
+
+ if (pscnum == 0) {
+ reg = davinci_psc0_regs;
+ mdstat = ®->psc0.mdstat[module];
+ mdctl = ®->psc0.mdctl[module];
+ } else {
+ reg = davinci_psc1_regs;
+ mdstat = ®->psc1.mdstat[module];
+ mdctl = ®->psc1.mdctl[module];
+ }
+
+ /* Wait for any outstanding transition to complete */
+ while ((readl(®->ptstat) & (0x00000001 << domain)))
+ ;
+
+ /* If we are already in that state, just return */
+ if ((readl(mdstat) & 0x1F) == state)
+ return;
+
+ /* Perform transition */
+ writel((readl(mdctl) & 0xFFFFFFE0) | state, mdctl);
+ setbits_le32(®->ptcmd, (0x00000001 << domain));
+
+ /* Wait for transition to complete */
+ while (readl(®->ptstat) & (0x00000001 << domain))
+ ;
+
+ /* Wait and verify the state */
+ while ((readl(mdstat) & 0x1F) != state)
+ ;
+}
+
+int da850_ddr_setup(unsigned int freq)
+{
+ unsigned long tmp;
+
+ /* Enable the Clock to DDR2/mDDR */
+ da850_lpc_transition(1, 6, 0, PSC_ENABLE);
+
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
+ /* Begin VTP Calibration */
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+
+ /* Polling READY bit to see when VTP calibration is done */
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ while ((tmp & VTP_READY) != VTP_READY)
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
+ }
+
+ writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
+ clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
+ (1 << DDR_SLEW_CMOSEN_BIT));
+
+ setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
+
+ writel((CONFIG_SYS_DA850_DDR2_SDBCR & ~0xf0000000) |
+ (readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/
+ &dv_ddr2_regs_ctrl->sdbcr);
+ writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
+
+ writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
+ writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
+
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr,
+ (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT));
+
+ /*
+ * LPMODEN and MCLKSTOPEN must be set!
+ * Without this bits set, PSC don;t switch states !!
+ */
+ writel(CONFIG_SYS_DA850_DDR2_SDRCR |
+ (1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
+ (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
+ &dv_ddr2_regs_ctrl->sdrcr);
+
+ /* SyncReset the Clock to EMIF3A SDRAM */
+ da850_lpc_transition(1, 6, 0, PSC_SYNCRESET);
+ /* Enable the Clock to EMIF3A SDRAM */
+ da850_lpc_transition(1, 6, 0, PSC_ENABLE);
+
+ /* disable self refresh */
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
+ writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
+
+ return 0;
+}
+
+static void da850_set_mdctl(dv_reg_p mdctl)
+{
+ if ((readl(mdctl) & 0x1F) != PSC_ENABLE)
+ writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl);
+}
+
+void da850_psc_init(void)
+{
+ struct davinci_psc_regs *reg;
+ int i;
+
+ /* PSC 0 domain 0 init */
+ reg = davinci_psc0_regs;
+ while ((readl(®->ptstat) & 0x00000001))
+ ;
+
+ for (i = 3; i <= 4 ; i++)
+ da850_set_mdctl(®->psc0.mdctl[i]);
+
+ for (i = 7; i <= 12 ; i++)
+ da850_set_mdctl(®->psc0.mdctl[i]);
+
+ /* Do Always-On Power Domain Transitions */
+ setbits_le32(®->ptcmd, 0x00000001);
+ while (readl(®->ptstat) & 0x00000001)
+ ;
+
+ /* PSC1, domain 1 init */
+ reg = davinci_psc1_regs;
+ while ((readl(®->ptstat) & 0x00000001))
+ ;
+
+ da850_set_mdctl(®->psc1.mdctl[3]);
+ da850_set_mdctl(®->psc1.mdctl[6]);
+
+ /* UART1 + UART2 */
+ for (i = 12 ; i <= 13 ; i++)
+ da850_set_mdctl(®->psc1.mdctl[i]);
+
+ da850_set_mdctl(®->psc1.mdctl[26]);
+ da850_set_mdctl(®->psc1.mdctl[31]);
+
+ /* Do Always-On Power Domain Transitions */
+ setbits_le32(®->ptcmd, 0x00000001);
+ while (readl(®->ptstat) & 0x00000001)
+ ;
+}
+
+void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
+ unsigned long value)
+{
+ clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
+ setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
+}
+
+__attribute__((weak))
+void board_gpio_init(void)
+{
+ return;
+}
+
+#if defined(CONFIG_NAND_SPL)
+void nand_boot(void)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ /* copy image from NOR to RAM */
+ memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
+ (void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_U_BOOT_SIZE);
+
+ /* and jump to it ... */
+ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+ (*uboot)();
+}
+#endif
+
+#if defined(CONFIG_NAND_SPL)
+void board_init_f(ulong bootflag)
+#else
+int arch_cpu_init(void)
+#endif
+{
+ /*
+ * copied from arch/arm/cpu/arm926ejs/start.S
+ *
+ * flush v4 I/D caches
+ */
+ asm("mov r0, #0");
+ asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
+ asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ asm("mrc p15, 0, r0, c1, c0, 0");
+ /* clear bits 13, 9:8 (--V- --RS) */
+ asm("bic r0, r0, #0x00002300");
+ /* clear bits 7, 2:0 (B--- -CAM) */
+ asm("bic r0, r0, #0x00000087");
+ /* set bit 2 (A) Align */
+ asm("orr r0, r0, #0x00000002");
+ /* set bit 12 (I) I-Cache */
+ asm("orr r0, r0, #0x00001000");
+ asm("mcr p15, 0, r0, c1, c0, 0");
+
+ /* Unlock kick registers */
+ writel(0x83e70b13, &davinci_syscfg_regs->kick0);
+ writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
+
+ dv_maskbits(&davinci_syscfg_regs->suspsrc,
+ ((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
+
+ /* System PSC setup - enable all */
+ da850_psc_init();
+
+ /* Setup Pinmux */
+ da850_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX0);
+ da850_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX1);
+ da850_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX2);
+ da850_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX3);
+ da850_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX4);
+ da850_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX5);
+ da850_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX6);
+ da850_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX7);
+ da850_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX8);
+ da850_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX9);
+ da850_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX10);
+ da850_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX11);
+ da850_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX12);
+ da850_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX13);
+ da850_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX14);
+ da850_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX15);
+ da850_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX16);
+ da850_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX17);
+ da850_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX18);
+ da850_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX19);
+
+ /* PLL setup */
+ da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM);
+ da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM);
+
+ /* GPIO setup */
+ board_gpio_init();
+
+ /* setup CSn config */
+ writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
+ writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
+
+ da850_lpc_transition(1, 13, 0, PSC_ENABLE);
+ NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
+ /*
+ * Fix Power and Emulation Management Register
+ * see sprufw3a.pdf page 37 Table 24
+ */
+ writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
+ (CONFIG_SYS_NS16550_COM1 + 0x30));
+#if defined(CONFIG_NAND_SPL)
+ puts("ddr init\n");
+ da850_ddr_setup(132);
+
+ puts("boot u-boot ...\n");
+
+ nand_boot();
+#else
+ da850_ddr_setup(132);
+ return 0;
+#endif
+}
diff --git a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h b/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
deleted file mode 100644
index 0bc7f76..0000000
--- a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * SoC-specific lowlevel code for AM1808 and similar chips
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __AM1808_LOWLEVEL_H
-#define __AM1808_LOWLEVEL_H
-
-/* NOR Boot Configuration Word Field Descriptions */
-#define AM1808_NORBOOT_COPY_XK(X) ((X - 1) << 8)
-#define AM1808_NORBOOT_METHOD_DIRECT (1 << 4)
-#define AM1808_NORBOOT_16BIT (1 << 0)
-
-#define dv_maskbits(addr, val) \
- writel((readl(addr) & val), addr)
-
-void am1808_waitloop(unsigned long loopcnt);
-int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
-void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
- unsigned char domain, unsigned char state);
-int am1808_ddr_setup(unsigned int freq);
-void am1808_psc_init(void);
-void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
- unsigned long value);
-
-#endif /* #ifndef __AM1808_LOWLEVEL_H */
diff --git a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
new file mode 100644
index 0000000..22a92a3
--- /dev/null
+++ b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
@@ -0,0 +1,44 @@
+/*
+ * SoC-specific lowlevel code for DA850
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __DA850_LOWLEVEL_H
+#define __DA850_LOWLEVEL_H
+
+/* NOR Boot Configuration Word Field Descriptions */
+#define DA850_NORBOOT_COPY_XK(X) ((X - 1) << 8)
+#define DA850_NORBOOT_METHOD_DIRECT (1 << 4)
+#define DA850_NORBOOT_16BIT (1 << 0)
+
+#define dv_maskbits(addr, val) \
+ writel((readl(addr) & val), addr)
+
+void da850_waitloop(unsigned long loopcnt);
+int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
+void da850_lpc_transition(unsigned char pscnum, unsigned char module,
+ unsigned char domain, unsigned char state);
+int da850_ddr_setup(unsigned int freq);
+void da850_psc_init(void);
+void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
+ unsigned long value);
+
+#endif /* #ifndef __DA850_LOWLEVEL_H */
diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c
index c25d240..d649d43 100644
--- a/board/enbw/enbw_cmc/enbw_cmc.c
+++ b/board/enbw/enbw_cmc/enbw_cmc.c
@@ -43,7 +43,7 @@
#include <asm/arch/sdmmc_defs.h>
#include <asm/arch/timer_defs.h>
#include <asm/io.h>
-#include <asm/arch/am1808_lowlevel.h>
+#include <asm/arch/da850_lowlevel.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 2c21147..bb44f93 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -44,7 +44,7 @@
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_AM1808_LOWLEVEL
+#define CONFIG_DA850_LOWLEVEL
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_HOSTNAME enbw_cmc
#define CONFIG_DISPLAY_CPUINFO
@@ -336,30 +336,30 @@
/* LowLevel Init */
/* PLL */
#define CONFIG_SYS_DV_CLKMODE 0
-#define CONFIG_SYS_AM1808_PLL0_POSTDIV 0
-#define CONFIG_SYS_AM1808_PLL0_PLLDIV1 0x8000
-#define CONFIG_SYS_AM1808_PLL0_PLLDIV2 0x8001
-#define CONFIG_SYS_AM1808_PLL0_PLLDIV3 0x8002 /* 150MHz */
-#define CONFIG_SYS_AM1808_PLL0_PLLDIV4 0x8003
-#define CONFIG_SYS_AM1808_PLL0_PLLDIV5 0x8002
-#define CONFIG_SYS_AM1808_PLL0_PLLDIV6 CONFIG_SYS_AM1808_PLL0_PLLDIV1
-#define CONFIG_SYS_AM1808_PLL0_PLLDIV7 0x8005
-
-#define CONFIG_SYS_AM1808_PLL1_POSTDIV 1
-#define CONFIG_SYS_AM1808_PLL1_PLLDIV1 0x8000
-#define CONFIG_SYS_AM1808_PLL1_PLLDIV2 0x8001
-#define CONFIG_SYS_AM1808_PLL1_PLLDIV3 0x8002
-
-#define CONFIG_SYS_AM1808_PLL0_PLLM 18 /* PLL0 -> 456 MHz */
-#define CONFIG_SYS_AM1808_PLL1_PLLM 24 /* PLL1 -> 300 MHz */
+#define CONFIG_SYS_DA850_PLL0_POSTDIV 0
+#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000
+#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001
+#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 /* 150MHz */
+#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003
+#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002
+#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1
+#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005
+
+#define CONFIG_SYS_DA850_PLL1_POSTDIV 1
+#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000
+#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001
+#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002
+
+#define CONFIG_SYS_DA850_PLL0_PLLM 18 /* PLL0 -> 456 MHz */
+#define CONFIG_SYS_DA850_PLL1_PLLM 24 /* PLL1 -> 300 MHz */
/* DDR RAM */
-#define CONFIG_SYS_AM1808_DDR2_DDRPHYCR (0 | \
+#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (0 | \
(0x1 << 7) | \
(0x1 << 6) | \
(0x4 << 0))
-#define CONFIG_SYS_AM1808_DDR2_SDBCR (0 | \
+#define CONFIG_SYS_DA850_DDR2_SDBCR (0 | \
(0 << DV_DDR_SDCR_DDR2TERM1_SHIFT) | \
(0 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \
(1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \
@@ -371,12 +371,12 @@
(0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \
(0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
-#define CONFIG_SYS_AM1808_DDR2_SDBCR2 4 /* 13 row address bits */
+#define CONFIG_SYS_DA850_DDR2_SDBCR2 4 /* 13 row address bits */
/*
* freq = 150MHz -> t = 7ns
*/
-#define CONFIG_SYS_AM1808_DDR2_SDTIMR (0 | \
+#define CONFIG_SYS_DA850_DDR2_SDTIMR (0 | \
(0x0d << 25) | /* tRFC = 105 105/7 = 15 - 1 = 0xd */ \
(1 << 22) | /* tRP 15/7 = 2 - 1 = 1 */ \
(1 << 19) | /* tRCD 15/7 = 2 - 1 = 1 */ \
@@ -390,7 +390,7 @@
/*
* freq = 150MHz -> t=7ns
*/
-#define CONFIG_SYS_AM1808_DDR2_SDTIMR2 (0 | \
+#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (0 | \
(readl(&dv_ddr2_regs_ctrl->sdtimr2) & 0x80000000) | /* Reserved */ \
(8 << 27) | /* tRASMAX [(70us/7800ns)-1] */ \
(2 << 25) | /* tXP = 2, tCKe = 3 -> 3 - 1 = 2 */ \
@@ -400,35 +400,35 @@
(0 << 5) | /* tRTP = 7.5 7.5/7 = 1 - 1 = 0 */ \
(2 << 0)) /* tCKE = 3 -> 3 - 1 = 2 */
-#define CONFIG_SYS_AM1808_DDR2_SDRCR 0x00000407
+#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000407
/*
* with Pin Setup Utility from TI
* missing GPIO pin setup
*/
-#define CONFIG_SYS_AM1808_PINMUX0 0x44448888
-#define CONFIG_SYS_AM1808_PINMUX1 0x48888884
-#define CONFIG_SYS_AM1808_PINMUX2 0x88888888
-#define CONFIG_SYS_AM1808_PINMUX3 0x88888888
-#define CONFIG_SYS_AM1808_PINMUX4 0x22222288
-#define CONFIG_SYS_AM1808_PINMUX5 0x11111111
-#define CONFIG_SYS_AM1808_PINMUX6 0x11818811
-#define CONFIG_SYS_AM1808_PINMUX7 0x11111811
-#define CONFIG_SYS_AM1808_PINMUX8 0x11111111
-#define CONFIG_SYS_AM1808_PINMUX9 0x11111111
-#define CONFIG_SYS_AM1808_PINMUX10 0x11111111
-#define CONFIG_SYS_AM1808_PINMUX11 0x11111111
-#define CONFIG_SYS_AM1808_PINMUX12 0x11111111
-#define CONFIG_SYS_AM1808_PINMUX13 0x88888800
-#define CONFIG_SYS_AM1808_PINMUX14 0x00000088
-#define CONFIG_SYS_AM1808_PINMUX15 0x00000000
-#define CONFIG_SYS_AM1808_PINMUX16 0x88888880
-#define CONFIG_SYS_AM1808_PINMUX17 0x88888888
-#define CONFIG_SYS_AM1808_PINMUX18 0x88022288
-#define CONFIG_SYS_AM1808_PINMUX19 0x08022228
-
-#define CONFIG_SYS_AM1808_CS2CFG 0x08624311
-#define CONFIG_SYS_AM1808_CS3CFG 0x04222310
+#define CONFIG_SYS_DA850_PINMUX0 0x44448888
+#define CONFIG_SYS_DA850_PINMUX1 0x48888884
+#define CONFIG_SYS_DA850_PINMUX2 0x88888888
+#define CONFIG_SYS_DA850_PINMUX3 0x88888888
+#define CONFIG_SYS_DA850_PINMUX4 0x22222288
+#define CONFIG_SYS_DA850_PINMUX5 0x11111111
+#define CONFIG_SYS_DA850_PINMUX6 0x11818811
+#define CONFIG_SYS_DA850_PINMUX7 0x11111811
+#define CONFIG_SYS_DA850_PINMUX8 0x11111111
+#define CONFIG_SYS_DA850_PINMUX9 0x11111111
+#define CONFIG_SYS_DA850_PINMUX10 0x11111111
+#define CONFIG_SYS_DA850_PINMUX11 0x11111111
+#define CONFIG_SYS_DA850_PINMUX12 0x11111111
+#define CONFIG_SYS_DA850_PINMUX13 0x88888800
+#define CONFIG_SYS_DA850_PINMUX14 0x00000088
+#define CONFIG_SYS_DA850_PINMUX15 0x00000000
+#define CONFIG_SYS_DA850_PINMUX16 0x88888880
+#define CONFIG_SYS_DA850_PINMUX17 0x88888888
+#define CONFIG_SYS_DA850_PINMUX18 0x88022288
+#define CONFIG_SYS_DA850_PINMUX19 0x08022228
+
+#define CONFIG_SYS_DA850_CS2CFG 0x08624311
+#define CONFIG_SYS_DA850_CS3CFG 0x04222310
/*
* NOR Bootconfiguration word:
--
1.7.0.4
More information about the U-Boot
mailing list