[U-Boot] [PATCH v8 3/3] MIPS: Jz4740: Add qi_lb60 board support

Shinya Kuribayashi skuribay at pobox.com
Wed Oct 12 16:27:06 CEST 2011


From: Xiangfu Liu <xiangfu at openmobilefree.net>
Date: Wed, 12 Oct 2011 12:24:06 +0800

Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device
from Qi hardware:

http://en.qi-hardware.com/wiki/Ben_NanoNote
http://en.qi-hardware.com/wiki/Main_Page
http://en.wikipedia.org/wiki/Qi_hardware

This Jz4740-based clamshell device does not use NOR flash to boot.
The initial bring-up assumes that U-Boot is directly loaded into SDRAM
using USB boot tool, and starts from 0x80100000.

About USB boot tool
-------------------

Jz4740 is one of the XBurst processors with USB boot functionality
supported.  The CPU can boot from a small ROM in the LSI, initialize
CPU and USB module, then wait for USB commands from the USB host.
We can send 8 KB binary data to the CPU cache using USB boot tool.

USB boot tool is available to the public at Ingenic website.  Also
there is an alternative Debian package named xburst-tools.

Signed-off-by: Xiangfu Liu <xiangfu at openmobilefree.net>
Acked-by: Daniel <zpxu at ingenic.cn>
Signed-off-by: Shinya Kuribayashi <skuribay at pobox.com>
---
Changes since v7:

* Fix checkpatch errors/warnings

Changes since v6:

* <nanonote.h> config files is folded into <qi_lb60.h>

* Following configs are deleted:
  CONFIG_SYS_64BIT_VSPRINTF
  CONFIG_NANDBOOT_CFG
  CONFIG_QI_LB60

 MAINTAINERS                 |    4 +
 MAKEALL                     |    4 +-
 board/qi/qi_lb60/Makefile   |   45 +++++++++
 board/qi/qi_lb60/config.mk  |   31 +++++++
 board/qi/qi_lb60/qi_lb60.c  |  104 +++++++++++++++++++++
 board/qi/qi_lb60/u-boot.lds |   61 +++++++++++++
 boards.cfg                  |    1 +
 include/configs/qi_lb60.h   |  211 +++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 460 insertions(+), 1 deletions(-)
 create mode 100644 board/qi/qi_lb60/Makefile
 create mode 100644 board/qi/qi_lb60/config.mk
 create mode 100644 board/qi/qi_lb60/qi_lb60.c
 create mode 100644 board/qi/qi_lb60/u-boot.lds
 create mode 100644 include/configs/qi_lb60.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 3ab38fa..bb95e6d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -928,6 +928,10 @@ Stefan Roese <sr at denx.de>
 
 	vct_xxx		MIPS32 4Kc
 
+Xiangfu Liu <xiangfu at openmobilefree.net>
+
+	qi_lb60		MIPS32 (XBurst Jz4740 SoC)
+
 #########################################################################
 # Nios-II Systems:							#
 #									#
diff --git a/MAKEALL b/MAKEALL
index 52bc355..f582f8b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -400,7 +400,9 @@ LIST_mips="		\
 ## MIPS Systems		(little endian)
 #########################################################################
 
-LIST_mips4kc_el=""
+LIST_mips4kc_el="	\
+	qi_lb60		\
+"
 
 LIST_mips5kc_el=""
 
diff --git a/board/qi/qi_lb60/Makefile b/board/qi/qi_lb60/Makefile
new file mode 100644
index 0000000..2f5b4be
--- /dev/null
+++ b/board/qi/qi_lb60/Makefile
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2006
+# Ingenic Semiconductor, <jlwei at ingenic.cn>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/qi/qi_lb60/config.mk b/board/qi/qi_lb60/config.mk
new file mode 100644
index 0000000..858e6a2
--- /dev/null
+++ b/board/qi/qi_lb60/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2006 Qi Hardware, Inc.
+# Author: Xiangfu Liu <xiangfu.z at gmail.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Qi Hardware, Inc. Ben NanoNote (QI_LB60)
+#
+
+ifndef TEXT_BASE
+# ROM version
+# TEXT_BASE = 0x88000000
+
+# RAM version
+TEXT_BASE = 0x80100000
+endif
diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c
new file mode 100644
index 0000000..3583d01
--- /dev/null
+++ b/board/qi/qi_lb60/qi_lb60.c
@@ -0,0 +1,104 @@
+/*
+ * Authors: Xiangfu Liu <xiangfu at sharism.cc>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 3 of the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/jz4740.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void gpio_init(void)
+{
+	unsigned int i;
+
+	/* Initialize NAND Flash Pins */
+	__gpio_as_nand();
+
+	/* Initialize SDRAM pins */
+	__gpio_as_sdram_16bit_4720();
+
+	/* Initialize LCD pins */
+	__gpio_as_lcd_18bit();
+
+	/* Initialize MSC pins */
+	__gpio_as_msc();
+
+	/* Initialize Other pins */
+	for (i = 0; i < 7; i++) {
+		__gpio_as_input(GPIO_KEYIN_BASE + i);
+		__gpio_enable_pull(GPIO_KEYIN_BASE + i);
+	}
+
+	for (i = 0; i < 8; i++) {
+		__gpio_as_output(GPIO_KEYOUT_BASE + i);
+		__gpio_clear_pin(GPIO_KEYOUT_BASE + i);
+	}
+
+	__gpio_as_input(GPIO_KEYIN_8);
+	__gpio_enable_pull(GPIO_KEYIN_8);
+
+	/* enable the TP4, TP5 as UART0 */
+	__gpio_jtag_to_uart0();
+
+	__gpio_as_output(GPIO_AUDIO_POP);
+	__gpio_set_pin(GPIO_AUDIO_POP);
+
+	__gpio_as_output(GPIO_LCD_CS);
+	__gpio_clear_pin(GPIO_LCD_CS);
+
+	__gpio_as_output(GPIO_AMP_EN);
+	__gpio_clear_pin(GPIO_AMP_EN);
+
+	__gpio_as_output(GPIO_SDPW_EN);
+	__gpio_disable_pull(GPIO_SDPW_EN);
+	__gpio_clear_pin(GPIO_SDPW_EN);
+
+	__gpio_as_input(GPIO_SD_DETECT);
+	__gpio_disable_pull(GPIO_SD_DETECT);
+
+	__gpio_as_input(GPIO_USB_DETECT);
+	__gpio_enable_pull(GPIO_USB_DETECT);
+}
+
+static void cpm_init(void)
+{
+	struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
+	uint32_t reg = readw(&cpm->clkgr);
+
+	reg |=	CPM_CLKGR_IPU |
+		CPM_CLKGR_CIM |
+		CPM_CLKGR_I2C |
+		CPM_CLKGR_SSI |
+		CPM_CLKGR_UART1 |
+		CPM_CLKGR_SADC |
+		CPM_CLKGR_UHC |
+		CPM_CLKGR_UDC |
+		CPM_CLKGR_AIC1;
+
+	writew(reg, &cpm->clkgr);
+}
+
+int board_early_init_f(void)
+{
+	gpio_init();
+	cpm_init();
+	calc_clocks();	/* calc the clocks */
+	rtc_init();	/* init rtc on any reset */
+
+	return 0;
+}
+
+/* U-Boot common routines */
+int checkboard(void)
+{
+	printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n",
+	       gd->cpu_clk / 1000000);
+
+	return 0;
+}
diff --git a/board/qi/qi_lb60/u-boot.lds b/board/qi/qi_lb60/u-boot.lds
new file mode 100644
index 0000000..7317652
--- /dev/null
+++ b/board/qi/qi_lb60/u-boot.lds
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei at ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+	  *(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data  : { *(.data*) }
+
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	__got_start = .;
+	.got  : { *(.got) }
+	__got_end = .;
+
+	.sdata  : { *(.sdata*) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss  : { *(.sbss*) }
+	.bss  : { *(.bss*) . = ALIGN(4); }
+	uboot_end = .;
+}
diff --git a/boards.cfg b/boards.cfg
index 65482ac..d3d610d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -302,6 +302,7 @@ vct_platinumavc              mips        mips32      vct                 microna
 vct_platinumavc_small        mips        mips32      vct                 micronas       -           vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE
 vct_platinumavc_onenand      mips        mips32      vct                 micronas       -           vct:VCT_PLATINUMAVC,VCT_ONENAND
 vct_platinumavc_onenand_small mips       mips32      vct                 micronas       -           vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE
+qi_lb60                      mips        xburst      qi_lb60             qi
 nios2-generic                nios2       nios2       nios2-generic       altera
 PCI5441                      nios2       nios2       pci5441             psyent
 PK1C20                       nios2       nios2       pk1c20              psyent
diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
new file mode 100644
index 0000000..f989595
--- /dev/null
+++ b/include/configs/qi_lb60.h
@@ -0,0 +1,211 @@
+/*
+ * Authors: Xiangfu Liu <xiangfu.z at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 3 of the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_QI_LB60_H
+#define __CONFIG_QI_LB60_H
+
+#define CONFIG_MIPS32		/* MIPS32 CPU core */
+#define CONFIG_JZSOC		/* Jz SoC */
+#define CONFIG_JZ4740		/* Jz4740 SoC */
+#define CONFIG_NAND_JZ4740
+
+#define CONFIG_SYS_CPU_SPEED	336000000	/* CPU clock: 336 MHz */
+#define CONFIG_SYS_EXTAL	12000000	/* EXTAL freq: 12 MHz */
+#define CONFIG_SYS_HZ		(CONFIG_SYS_EXTAL / 256) /* incrementer freq */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	CONFIG_SYS_CPU_SPEED
+
+#define CONFIG_SYS_UART_BASE	JZ4740_UART0_BASE /* Base of the UART channel */
+#define CONFIG_BAUDRATE		57600
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_FLASH_BASE	0 /* init flash_base as 0 */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAUL)
+#define CONFIG_BOOTDELAY	0
+#define CONFIG_BOOTARGS		"mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
+#define CONFIG_BOOTCOMMAND	"nand read 0x80600000 0x400000 0x200000;bootm"
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BOOTD	/* bootd			*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
+#define CONFIG_CMD_ECHO		/* echo arguments		*/
+
+#define CONFIG_CMD_LOADB	/* loadb			*/
+#define CONFIG_CMD_LOADS	/* loads			*/
+#define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC		/* Misc functions like sleep etc*/
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SAVEENV	/* saveenv			*/
+#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SOURCE	/* "source" command support	*/
+#define CONFIG_CMD_NAND
+
+/*
+ * Serial download configuration
+ */
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "NanoNote# "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(128 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000	/* Cached addr */
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
+#define CONFIG_SYS_LOAD_ADDR		0x80600000
+#define CONFIG_SYS_MEMTEST_START	0x80100000
+#define CONFIG_SYS_MEMTEST_END		0x80800000
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_NAND		/* use NAND for environment vars */
+
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+/*
+ * if board nand flash is 1GB, set to 1
+ * if board nand flash is 2GB, set to 2
+ * for change the PAGE_SIZE and BLOCK_SIZE
+ * will delete when there is no 1GB flash
+ */
+#define NANONOTE_NAND_SIZE	2
+
+#define CONFIG_SYS_NAND_PAGE_SIZE	(2048 * NANONOTE_NAND_SIZE)
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(256 * NANONOTE_NAND_SIZE << 10)
+/* nand bad block was marked at this page in a block, start from 0 */
+#define CONFIG_SYS_NAND_BADBLOCK_PAGE	127
+#define CONFIG_SYS_NAND_PAGE_COUNT	128
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+/* ECC offset position in oob area, default value is 6 if it isn't defined */
+#define CONFIG_SYS_NAND_ECC_POS		(6 * NANONOTE_NAND_SIZE)
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	9
+#define CONFIG_SYS_NAND_ECCSTEPS	\
+	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL	\
+	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCPOS		\
+		{12, 13, 14, 15, 16, 17, 18, 19,\
+		20, 21, 22, 23, 24, 25, 26, 27, \
+		28, 29, 30, 31, 32, 33, 34, 35, \
+		36, 37, 38, 39, 40, 41, 42, 43, \
+		44, 45, 46, 47, 48, 49, 50, 51, \
+		52, 53, 54, 55, 56, 57, 58, 59, \
+		60, 61, 62, 63, 64, 65, 66, 67, \
+		68, 69, 70, 71, 72, 73, 74, 75, \
+		76, 77, 78, 79, 80, 81, 82, 83}
+
+#define CONFIG_SYS_NAND_OOBSIZE		128
+#define CONFIG_SYS_NAND_BASE		0xB8000000
+#define CONFIG_SYS_ONENAND_BASE		CONFIG_SYS_NAND_BASE
+#define NAND_MAX_CHIPS			1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl.*/
+#define CONFIG_NAND_SPL_TEXT_BASE	0x80000000
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 8k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 8kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ */
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x80100000 /* Load NUB to this addr */
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
+/* Start NUB from this addr*/
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
+
+#define CONFIG_ENV_SIZE		(4 << 10)
+#define CONFIG_ENV_OFFSET	\
+	(CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND \
+	(CONFIG_ENV_OFFSET  + CONFIG_SYS_NAND_BLOCK_SIZE)
+
+#define CONFIG_SYS_TEXT_BASE	0x80100000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
+
+/*
+ * SDRAM Info.
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+
+/*
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE	16384
+#define CONFIG_SYS_ICACHE_SIZE	16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
+/*
+ * GPIO definition
+ */
+#define GPIO_LCD_CS	(2 * 32 + 21)
+#define GPIO_AMP_EN	(3 * 32 + 4)
+
+#define GPIO_SDPW_EN	(3 * 32 + 2)
+#define GPIO_SD_DETECT	(3 * 32 + 0)
+
+#define GPIO_BUZZ_PWM	(3 * 32 + 27)
+#define GPIO_USB_DETECT	(3 * 32 + 28)
+
+#define GPIO_AUDIO_POP	(1 * 32 + 29)
+#define GPIO_COB_TEST	(1 * 32 + 30)
+
+#define GPIO_KEYOUT_BASE	(2 * 32 + 10)
+#define GPIO_KEYIN_BASE	(3 * 32 + 18)
+#define GPIO_KEYIN_8	(3 * 32 + 26)
+
+#define GPIO_SD_CD_N	GPIO_SD_DETECT		/* SD Card insert detect */
+#define GPIO_SD_VCC_EN_N	GPIO_SDPW_EN	/* SD Card Power Enable */
+
+#define SPEN	GPIO_LCD_CS	/* LCDCS :Serial command enable      */
+#define SPDA	(2 * 32 + 22)	/* LCDSCL:Serial command clock input */
+#define SPCK	(2 * 32 + 23)	/* LCDSDA:Serial command data input  */
+
+/* SDRAM paramters */
+#define SDRAM_BW16		1	/* Data bus width: 0-32bit, 1-16bit */
+#define SDRAM_BANK4		1	/* Banks each chip: 0-2bank, 1-4bank */
+#define SDRAM_ROW		13	/* Row address: 11 to 13 */
+#define SDRAM_COL		9	/* Column address: 8 to 12 */
+#define SDRAM_CASL		2	/* CAS latency: 2 or 3 */
+
+/* SDRAM Timings, unit: ns */
+#define SDRAM_TRAS		45	/* RAS# Active Time */
+#define SDRAM_RCD		20	/* RAS# to CAS# Delay */
+#define SDRAM_TPC		20	/* RAS# Precharge Time */
+#define SDRAM_TRWL		7	/* Write Latency Time */
+#define SDRAM_TREF		15625	/* Refresh period: 8192 cycles/64ms */
+
+#endif
-- 
1.7.5.4



More information about the U-Boot mailing list