[U-Boot] [PATCH 1/2] AVR32: use generic mmc framework

[Sven Schnelle]

On 10/12/2011 04:59 PM, Andreas Bießmann wrote:
> b) ext2ls is not reliable:
>>> ---8<---
>>> U-Boot>   ext2ls mmc 0:1
>>> <DIR>         1024 .
>>> <DIR>         1024 ..
>>> <DIR>        12288 lost+found
>>> gen_atmel_mci: CMDR 00051051 (17) ARGR 02008600 (SR: 00400025) Data
>>> Transfer Failed
>>>    ** ext2fs_devread read error - last part
>>> U-Boot>
>>> --->8---
>> Hmm, that's really bad. What type of card is this? MMC, SD or SDHC?
> It is SD card (the one delivered with my atstk1002, there is an Atmel
> label on it ;).
>
> When initialising mmc with old atmel_mci driver I get this:
>
> ---8<---
> U-Boot>  mmc init
> Manufacturer ID:       03
> OEM/Application ID:    5344
> Product name:          SD128
> Product Revision:      5.8
> Product Serial Number: 8227719
> Manufacturing Date:    06/03
> SD Card detected (RCA 58916)
> CSD data: 00260032 1f5983c0 fefa4fff 924040ab
> CSD structure version:   1.0
> MMC System Spec version: 0
> Card command classes:    1f5
> Read block length:       512
> Supports partial reads
> Write block length:      512
> Does not support partial writes
> Supports group WP:      32
> Card capacity:		125960192 bytes
> File format:            0/0
> Write protection:
> mmc: Using 131072 cycles data timeout (DTOR=0x62)
> .mmc1 is available
> --->8---
>

Thanks for the Info Andreas. Do you have some other SD/SDHC cards handy?
would be interesting if it doesn't work at all on your Board, or if this 
is an card
specific issue...

Regards
Sven