[U-Boot] [GIT PULL] Pull request u-boot-85xx.git (updated)
Wolfgang Denk
wd at denx.de
Wed Oct 12 22:41:52 CEST 2011
Dear Kumar Gala,
In message <alpine.LFD.2.00.1110091759260.22629 at right.am.freescale.net> you wrote:
> [ fixed mpc8548cds config patch to pass checkpatch ]
>
> The following changes since commit 0841ca90f22d73b0ea4642ef1ce33d879bb2f3ff:
> Wolfgang Denk (1):
> arm920t/s3c24x0/usb_ohci.c: fix warning: variable ... set but not used
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx master
>
> Andy Fleming (1):
> phylib: Work around bug in Teranetics PHY
>
> Becky Bruce (2):
> powerpc/mpc8641hpcn: fix SRIO BAT config
> powerpc/mpc86xx: Disable translation for BAT setup
>
> Fanzc (1):
> powerpc/mpc8536ds: Add USB support for MPC8536DS
>
> Tang Yuantian (1):
> fsl_sata: Fix compile error when CONFIG_LBA48 is not defined
>
> Timur Tabi (2):
> powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BIT
> powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY
>
> Xie Xiaobo (3):
> powerpc/mpc8536ds: Add eSPI support for MPC8536DS
> powerpc/mpc8536ds: Invert SDHC_WP pin polarity
> powerpc/mpc8536ds: Save the env variables to SDcard and SPI flash
>
> York Sun (2):
> powerpc/8xxx: Add support for interactive DDR programming interface
> powerpc/mpc8xxx: Merge entries in DDR speed table
>
> chenhui zhao (1):
> powerpc/mpc8548cds: Update config file
>
> README | 3 +
> arch/powerpc/cpu/mpc86xx/cpu_init.c | 28 -
> arch/powerpc/cpu/mpc86xx/start.S | 69 ++-
> arch/powerpc/cpu/mpc8xxx/ddr/Makefile | 3 +-
> arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 40 +-
> arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 1691 ++++++++++++++++++++++++++++
> arch/powerpc/cpu/mpc8xxx/ddr/main.c | 9 +-
> arch/powerpc/include/asm/fsl_fman.h | 9 +-
> arch/powerpc/include/asm/immap_85xx.h | 5 +
> board/freescale/corenet_ds/ddr.c | 222 ++--
> board/freescale/mpc8349emds/ddr.c | 80 +-
> board/freescale/mpc8536ds/mpc8536ds.c | 12 +-
> board/freescale/mpc8572ds/ddr.c | 203 ++--
> board/freescale/mpc8641hpcn/ddr.c | 165 ++--
> board/freescale/p1022ds/ddr.c | 79 +-
> board/freescale/p2020ds/ddr.c | 105 +-
> board/freescale/p2041rdb/ddr.c | 78 +-
> doc/README.fsl-ddr | 150 +++
> drivers/block/fsl_sata.c | 15 +-
> drivers/net/fm/dtsec.c | 2 +-
> drivers/net/fm/eth.c | 3 +-
> drivers/net/phy/teranetics.c | 21 +-
> include/configs/MPC8536DS.h | 51 +-
> include/configs/MPC8548CDS.h | 44 +-
> include/configs/MPC8641HPCN.h | 128 ++-
> include/configs/P1022DS.h | 3 +-
> include/configs/p1_p2_rdb_pc.h | 5 +-
> include/mpc86xx.h | 1 +
> 28 files changed, 2625 insertions(+), 599 deletions(-)
> create mode 100644 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Bus error -- driver executed.
More information about the U-Boot
mailing list