[U-Boot] [PATCH v6 2/5] tegra2: Move MMC clock initialization into MMC driver

[Stephen Warren]

This centralizes knowledge of MMC clocking into the MMC driver. This also
removes clock setup from the board files, which will simplify later changes
that modify the Harmony board to support the correct set of MMC controllers.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
Acked-by: Simon Glass <sjg at chromium.org>
Tested-by: Simon Glass <sjg at chromium.org>
---
 board/nvidia/common/board.c |   13 +------------
 drivers/mmc/tegra2_mmc.c    |   12 +++++++++---
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index d13537d..370a259 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -102,16 +102,6 @@ static void pin_mux_uart(void)
 
 #ifdef CONFIG_TEGRA2_MMC
 /*
- * Routine: clock_init_mmc
- * Description: init the PLL and clocks for the SDMMC controllers
- */
-static void clock_init_mmc(void)
-{
-	clock_start_periph_pll(PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH, 20000000);
-	clock_start_periph_pll(PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH, 20000000);
-}
-
-/*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
@@ -157,8 +147,7 @@ int board_init(void)
 int board_mmc_init(bd_t *bd)
 {
 	debug("board_mmc_init called\n");
-	/* Enable clocks, muxes, etc. for SDMMC controllers */
-	clock_init_mmc();
+	/* Enable muxes, etc. for SDMMC controllers */
 	pin_mux_mmc();
 	gpio_config_mmc();
 
diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c
index 9e741f2..78b1190 100644
--- a/drivers/mmc/tegra2_mmc.c
+++ b/drivers/mmc/tegra2_mmc.c
@@ -435,14 +435,22 @@ static int mmc_core_init(struct mmc *mmc)
 
 static int tegra2_mmc_initialize(int dev_index, int bus_width)
 {
+	struct mmc_host *host;
 	struct mmc *mmc;
 
 	debug(" mmc_initialize called\n");
 
+	host = &mmc_host[dev_index];
+
+	host->clock = 0;
+	tegra2_get_setup(host, dev_index);
+
+	clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
+
 	mmc = &mmc_dev[dev_index];
 
 	sprintf(mmc->name, "Tegra2 SD/MMC");
-	mmc->priv = &mmc_host[dev_index];
+	mmc->priv = host;
 	mmc->send_cmd = mmc_send_cmd;
 	mmc->set_ios = mmc_set_ios;
 	mmc->init = mmc_core_init;
@@ -465,8 +473,6 @@ static int tegra2_mmc_initialize(int dev_index, int bus_width)
 	mmc->f_min = 375000;
 	mmc->f_max = 48000000;
 
-	mmc_host[dev_index].clock = 0;
-	tegra2_get_setup(&mmc_host[dev_index], dev_index);
 	mmc_register(mmc);
 
 	return 0;
-- 
1.7.0.4