[U-Boot] [PATCH v3 2/2] video: Moving mx3fb.c to CONFIG_VIDEO
Anatolij Gustschin
agust at denx.de
Thu Oct 13 11:16:29 CEST 2011
From: Helmut Raiger <helmut.raiger at hale.at>
mx3fb.c was based on CONFIG_LCD and is moved by this patch to
CONFIG_VIDEO, which has greater freedom in selecting videomodes
even at runtime.
This renders the accumulating list of display defines
(CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as
these may be setup through env variables:
uboot> setenv mydisplay 'video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,
le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0'
uboot> setenv videomode ${mydisplay}
This commit also fixes the board config files for qong and
imx31_phycore boards as needed. The videomode settings of
previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS
now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased
to make the frame buffer allocation working with the changed
driver.
Signed-off-by: Helmut Raiger <helmut.raiger at hale.at>
Signed-off-by: Anatolij Gustschin <agust at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
Changes since v2:
- fixed commit message
- added display info for removed display timings of
previously supported displays (in a comment)
- fixed compiler warning showed when compiling with debug
enabled
- added "Video: " prefix before display info output (as
we usually do it in U-Boot)
- fixed board config files for 'qong' and 'imx31_phycore' boards
so that this commit doesn't break compiling (bisectable now)
- added videomode settings for previously supported displays on
'qong' and 'imx31_phycore' to CONFIG_EXTRA_ENV_SETTINGS
- increased CONFIG_SYS_MALLOC_LEN for 'imx31_phycore' so that
the frame buffer can be allocated now (this is required to make
the display support working with the changed mx3fb driver)
drivers/video/Makefile | 2 +-
drivers/video/cfb_console.c | 7 +
drivers/video/mx3fb.c | 459 +++++++++++++++++++++++----------------
include/configs/imx31_phycore.h | 24 +-
include/configs/qong.h | 14 +-
5 files changed, 297 insertions(+), 209 deletions(-)
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 3790f91..ecc1896 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -35,7 +35,7 @@ COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
-COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
+COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
COBJS-$(CONFIG_VIDEO_MX5) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o
COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o videomodes.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 3a93b64..4e653b8 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -161,6 +161,13 @@
#endif
/*
+ * Defines for the i.MX31 driver (mx3fb.c)
+ */
+#ifdef CONFIG_VIDEO_MX3
+#define VIDEO_FB_16BPP_WORD_SWAP
+#endif
+
+/*
* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc.
*/
#include <video_fb.h>
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 0c925a0..f30deb3 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -1,6 +1,8 @@
/*
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg at denx.de>
+ * Copyright (C) 2011
+ * HALE electronic GmbH, <helmut.raiger at hale.at>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,100 +23,20 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <lcd.h>
-#include <asm/arch/clock.h>
+#include <malloc.h>
+#include <video_fb.h>
+
#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
#include <asm/errno.h>
+#include <asm/io.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-int lcd_line_length;
-int lcd_color_fg;
-int lcd_color_bg;
-
-short console_col;
-short console_row;
-
-void lcd_initcolregs(void)
-{
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-void lcd_panel_disable(void)
-{
-}
+#include "videomodes.h"
-#define msleep(a) udelay(a * 1000)
-
-#if defined(CONFIG_DISPLAY_VBEST_VGG322403)
-#define XRES 320
-#define YRES 240
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 156000
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 20 /* left_margin */
-#define H_SYNC_WIDTH 30 /* hsync_len */
-#define H_END_WIDTH (38 + 30) /* right_margin + hsync_len */
-#define V_START_WIDTH 7 /* upper_margin */
-#define V_SYNC_WIDTH 3 /* vsync_len */
-#define V_END_WIDTH (26 + 3) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+/* this might need panel specific set-up as-well */
#define IF_CONF 0
-#define IF_CLK_DIV 0x175
-#elif defined(CONFIG_DISPLAY_COM57H5M10XRC)
-#define XRES 640
-#define YRES 480
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 40000
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 120 /* left_margin */
-#define H_SYNC_WIDTH 30 /* hsync_len */
-#define H_END_WIDTH (10 + 30) /* right_margin + hsync_len */
-#define V_START_WIDTH 35 /* upper_margin */
-#define V_SYNC_WIDTH 3 /* vsync_len */
-#define V_END_WIDTH (7 + 3) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
-#define IF_CONF 0
-#define IF_CLK_DIV 0x55
-#else
-#define XRES 240
-#define YRES 320
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 185925
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 9 /* left_margin */
-#define H_SYNC_WIDTH 1 /* hsync_len */
-#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */
-#define V_START_WIDTH 7 /* upper_margin */
-#define V_SYNC_WIDTH 1 /* vsync_len */
-#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
-#define IF_CONF 0
-#define IF_CLK_DIV 0x175
-#endif
-
-#define LCD_COLOR_IPU LCD_COLOR16
-
-static ushort colormap[256];
-
-vidinfo_t panel_info = {
- .vl_col = XRES,
- .vl_row = YRES,
- .vl_bpix = LCD_COLOR_IPU,
- .cmap = colormap,
-};
-#define BIT_PER_PIXEL NBITS(LCD_COLOR_IPU)
+/* -------------- controller specific stuff -------------- */
/* IPU DMA Controller channel definitions. */
enum ipu_channel {
@@ -438,89 +360,134 @@ union chan_param_mem {
struct chan_param_mem_interleaved ip;
};
-static inline u32 reg_read(unsigned long reg)
-{
- return __REG(reg);
-}
+DECLARE_GLOBAL_DATA_PTR;
-static inline void reg_write(u32 value, unsigned long reg)
-{
- __REG(reg) = value;
-}
+/* graphics setup */
+static GraphicDevice panel;
+static struct ctfb_res_modes *mode;
+static struct ctfb_res_modes var_mode;
/*
* sdc_init_panel() - initialize a synchronous LCD panel.
* @width: width of panel in pixels.
* @height: height of panel in pixels.
- * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @di_setup: pixel format of the frame buffer
+ * @di_panel: either SHARP or normal TFT
* @return: 0 on success or negative error code on failure.
*/
-static int sdc_init_panel(u16 width, u16 height, enum pixel_fmt pixel_fmt)
+static int sdc_init_panel(u16 width, u16 height,
+ enum pixel_fmt di_setup, enum ipu_panel di_panel)
{
- u32 reg;
+ u32 reg, div;
uint32_t old_conf;
+ int clock;
+
+ debug("%s(width=%d, height=%d)\n", __func__, width, height);
+
+ /* Init clocking, the IPU receives its clock from the hsp divder */
+ clock = mxc_get_clock(MXC_IPU_CLK);
+ if (clock < 0)
+ return -EACCES;
/* Init panel size and blanking periods */
- reg = ((H_SYNC_WIDTH - 1) << 26) |
- ((u32)(width + H_START_WIDTH + H_END_WIDTH - 1) << 16);
- reg_write(reg, SDC_HOR_CONF);
+ reg = width + mode->left_margin + mode->right_margin - 1;
+ if (reg > 1023) {
+ printf("mx3fb: Display width too large, coerced to 1023!");
+ reg = 1023;
+ }
+ reg = ((mode->hsync_len - 1) << 26) | (reg << 16);
+ writel(reg, SDC_HOR_CONF);
- reg = ((V_SYNC_WIDTH - 1) << 26) | SDC_V_SYNC_WIDTH_L |
- ((u32)(height + V_START_WIDTH + V_END_WIDTH - 1) << 16);
- reg_write(reg, SDC_VER_CONF);
+ reg = height + mode->upper_margin + mode->lower_margin - 1;
+ if (reg > 1023) {
+ printf("mx3fb: Display height too large, coerced to 1023!");
+ reg = 1023;
+ }
+ reg = ((mode->vsync_len - 1) << 26) | SDC_V_SYNC_WIDTH_L | (reg << 16);
+ writel(reg, SDC_VER_CONF);
- switch (PANEL_TYPE) {
+ switch (di_panel) {
case IPU_PANEL_SHARP_TFT:
- reg_write(0x00FD0102L, SDC_SHARP_CONF_1);
- reg_write(0x00F500F4L, SDC_SHARP_CONF_2);
- reg_write(SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ writel(0x00FD0102L, SDC_SHARP_CONF_1);
+ writel(0x00F500F4L, SDC_SHARP_CONF_2);
+ writel(SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ /* TODO: probably IF_CONF must be adapted (see below)! */
break;
case IPU_PANEL_TFT:
- reg_write(SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ writel(SDC_COM_TFT_COLOR, SDC_COM_CONF);
break;
default:
return -EINVAL;
}
- /* Init clocking */
-
/*
- * Calculate divider: fractional part is 4 bits so simply multiple by
- * 2^4 to get fractional part, as long as we stay under ~250MHz and on
- * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+ * Calculate divider: The fractional part is 4 bits so simply
+ * multiple by 2^4 to get it.
+ *
+ * Opposed to the kernel driver mode->pixclock is the time of one
+ * pixel in pico seconds, so:
+ * pixel_clk = 1e12 / mode->pixclock
+ * div = ipu_clk * 16 / pixel_clk
+ * leads to:
+ * div = ipu_clk * 16 / (1e12 / mode->pixclock)
+ * or:
+ * div = ipu_clk * 16 * mode->pixclock / 1e12
+ *
+ * To avoid integer overflows this is split into 2 shifts and
+ * one divide with sufficient accuracy:
+ * 16*1024*128*476837 = 0.9999996682e12
+ */
+ div = ((clock/1024) * (mode->pixclock/128)) / 476837;
+ debug("hsp_clk is %d, div=%d\n", clock, div);
+ /* coerce to not less than 4.0, not more than 255.9375 */
+ if (div < 0x40)
+ div = 0x40;
+ else if (div > 0xFFF)
+ div = 0xFFF;
+ /* DISP3_IF_CLK_DOWN_WR is half the divider value and 2 less
+ * fraction bits. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR
+ * based on timing debug DISP3_IF_CLK_UP_WR is 0
*/
+ writel((((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
- reg_write((((IF_CLK_DIV / 8) - 1) << 22) |
- IF_CLK_DIV, DI_DISP3_TIME_CONF);
+ /* DI settings for display 3: clock idle (bit 26) during vsync */
+ old_conf = readl(DI_DISP_IF_CONF) & 0x78FFFFFF;
+ writel(old_conf | IF_CONF, DI_DISP_IF_CONF);
- /* DI settings */
- old_conf = reg_read(DI_DISP_IF_CONF) & 0x78FFFFFF;
- reg_write(old_conf | IF_CONF, DI_DISP_IF_CONF);
+ /* only set display 3 polarity bits */
+ old_conf = readl(DI_DISP_SIG_POL) & 0xE0FFFFFF;
+ writel(old_conf | mode->sync, DI_DISP_SIG_POL);
- old_conf = reg_read(DI_DISP_SIG_POL) & 0xE0FFFFFF;
- reg_write(old_conf | SIG_POL, DI_DISP_SIG_POL);
+ writel(fmt_cfg[di_setup].b0, DI_DISP3_B0_MAP);
+ writel(fmt_cfg[di_setup].b1, DI_DISP3_B1_MAP);
+ writel(fmt_cfg[di_setup].b2, DI_DISP3_B2_MAP);
+ writel(readl(DI_DISP_ACC_CC) |
+ ((fmt_cfg[di_setup].acc - 1) << 12), DI_DISP_ACC_CC);
- reg_write(fmt_cfg[pixel_fmt].b0, DI_DISP3_B0_MAP);
- reg_write(fmt_cfg[pixel_fmt].b1, DI_DISP3_B1_MAP);
- reg_write(fmt_cfg[pixel_fmt].b2, DI_DISP3_B2_MAP);
- reg_write(reg_read(DI_DISP_ACC_CC) |
- ((fmt_cfg[pixel_fmt].acc - 1) << 12), DI_DISP_ACC_CC);
+ debug("DI_DISP_IF_CONF = 0x%08X\n", readl(DI_DISP_IF_CONF));
+ debug("DI_DISP_SIG_POL = 0x%08X\n", readl(DI_DISP_SIG_POL));
+ debug("DI_DISP3_TIME_CONF = 0x%08X\n", readl(DI_DISP3_TIME_CONF));
+ debug("SDC_HOR_CONF = 0x%08X\n", readl(SDC_HOR_CONF));
+ debug("SDC_VER_CONF = 0x%08X\n", readl(SDC_VER_CONF));
return 0;
}
static void ipu_ch_param_set_size(union chan_param_mem *params,
- uint32_t pixel_fmt, uint16_t width,
+ uint pixelfmt, uint16_t width,
uint16_t height, uint16_t stride)
{
+ debug("%s(pixelfmt=%d, width=%d, height=%d, stride=%d)\n",
+ __func__, pixelfmt, width, height, stride);
+
params->pp.fw = width - 1;
params->pp.fh_l = height - 1;
params->pp.fh_h = (height - 1) >> 8;
params->pp.sl = stride - 1;
/* See above, for further formats see the Linux driver */
- switch (pixel_fmt) {
- case IPU_PIX_FMT_RGB565:
+ switch (pixelfmt) {
+ case GDF_16BIT_565RGB:
params->ip.bpp = 2;
params->ip.pfs = 4;
params->ip.npb = 7;
@@ -533,7 +500,7 @@ static void ipu_ch_param_set_size(union chan_param_mem *params,
params->ip.wid1 = 5; /* Green bit width - 1 */
params->ip.wid2 = 4; /* Blue bit width - 1 */
break;
- case IPU_PIX_FMT_RGB24:
+ case GDF_32BIT_X888RGB:
params->ip.bpp = 1; /* 24 BPP & RGB PFS */
params->ip.pfs = 4;
params->ip.npb = 7;
@@ -547,6 +514,7 @@ static void ipu_ch_param_set_size(union chan_param_mem *params,
params->ip.wid2 = 7; /* Blue bit width - 1 */
break;
default:
+ printf("mx3fb: Pixel format not supported!\n");
break;
}
@@ -564,8 +532,8 @@ static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
uint32_t num_words)
{
for (; num_words > 0; num_words--) {
- reg_write(addr, IPU_IMA_ADDR);
- reg_write(*data++, IPU_IMA_DATA);
+ writel(addr, IPU_IMA_ADDR);
+ writel(*data++, IPU_IMA_DATA);
addr++;
if ((addr & 0x7) == 5) {
addr &= ~0x7; /* set to word 0 */
@@ -574,16 +542,6 @@ static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
}
}
-static uint32_t bpp_to_pixfmt(int bpp)
-{
- switch (bpp) {
- case 16:
- return IPU_PIX_FMT_RGB565;
- default:
- return 0;
- }
-}
-
static uint32_t dma_param_addr(enum ipu_channel channel)
{
/* Channel Parameter Memory */
@@ -596,11 +554,13 @@ static void ipu_init_channel_buffer(enum ipu_channel channel, void *fbmem)
uint32_t reg;
uint32_t stride_bytes;
- stride_bytes = (XRES * ((BIT_PER_PIXEL + 7) / 8) + 3) & ~3;
+ stride_bytes = (panel.plnSizeX * panel.gdfBytesPP + 3) & ~3;
+
+ debug("%s(channel=%d, fbmem=%p)\n", __func__, channel, fbmem);
/* Build parameter memory data for DMA channel */
- ipu_ch_param_set_size(¶ms, bpp_to_pixfmt(BIT_PER_PIXEL),
- XRES, YRES, stride_bytes);
+ ipu_ch_param_set_size(¶ms, panel.gdfIndex,
+ panel.plnSizeX, panel.plnSizeY, stride_bytes);
ipu_ch_param_set_buffer(¶ms, fbmem, NULL);
params.pp.bam = 0;
/* Some channels (rotation) have restriction on burst length */
@@ -617,22 +577,22 @@ static void ipu_init_channel_buffer(enum ipu_channel channel, void *fbmem)
ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)¶ms, 10);
/* Disable double-buffering */
- reg = reg_read(IPU_CHA_DB_MODE_SEL);
+ reg = readl(IPU_CHA_DB_MODE_SEL);
reg &= ~(1UL << channel);
- reg_write(reg, IPU_CHA_DB_MODE_SEL);
+ writel(reg, IPU_CHA_DB_MODE_SEL);
}
static void ipu_channel_set_priority(enum ipu_channel channel,
int prio)
{
- u32 reg = reg_read(IDMAC_CHA_PRI);
+ u32 reg = readl(IDMAC_CHA_PRI);
if (prio)
reg |= 1UL << channel;
else
reg &= ~(1UL << channel);
- reg_write(reg, IDMAC_CHA_PRI);
+ writel(reg, IDMAC_CHA_PRI);
}
/*
@@ -645,7 +605,7 @@ static int ipu_enable_channel(enum ipu_channel channel)
uint32_t reg;
/* Reset to buffer 0 */
- reg_write(1UL << channel, IPU_CHA_CUR_BUF);
+ writel(1UL << channel, IPU_CHA_CUR_BUF);
switch (channel) {
case IDMAC_SDC_0:
@@ -655,8 +615,8 @@ static int ipu_enable_channel(enum ipu_channel channel)
break;
}
- reg = reg_read(IDMAC_CHA_EN);
- reg_write(reg | (1UL << channel), IDMAC_CHA_EN);
+ reg = readl(IDMAC_CHA_EN);
+ writel(reg | (1UL << channel), IDMAC_CHA_EN);
return 0;
}
@@ -665,13 +625,13 @@ static int ipu_update_channel_buffer(enum ipu_channel channel, void *buf)
{
uint32_t reg;
- reg = reg_read(IPU_CHA_BUF0_RDY);
+ reg = readl(IPU_CHA_BUF0_RDY);
if (reg & (1UL << channel))
return -EACCES;
/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
- reg_write(dma_param_addr(channel) + 0x0008UL, IPU_IMA_ADDR);
- reg_write((u32)buf, IPU_IMA_DATA);
+ writel(dma_param_addr(channel) + 0x0008UL, IPU_IMA_ADDR);
+ writel((u32)buf, IPU_IMA_DATA);
return 0;
}
@@ -690,7 +650,7 @@ static int idmac_tx_submit(enum ipu_channel channel, void *buf)
/* ipu_idmac.c::ipu_select_buffer() */
/* Mark buffer 0 as ready. */
- reg_write(1UL << channel, IPU_CHA_BUF0_RDY);
+ writel(1UL << channel, IPU_CHA_BUF0_RDY);
ret = ipu_enable_channel(channel);
@@ -706,8 +666,8 @@ static void sdc_enable_channel(void *fbmem)
/* mx3fb.c::sdc_fb_init() */
if (ret >= 0) {
- reg = reg_read(SDC_COM_CONF);
- reg_write(reg | SDC_COM_BG_EN, SDC_COM_CONF);
+ reg = readl(SDC_COM_CONF);
+ writel(reg | SDC_COM_BG_EN, SDC_COM_CONF);
}
/*
@@ -715,31 +675,33 @@ static void sdc_enable_channel(void *fbmem)
* interrupts. Next sdc_set_brightness() is going to be called
* from mx3fb_blank().
*/
- msleep(2);
+ udelay(2000);
}
/*
* mx3fb_set_par() - set framebuffer parameters and change the operating mode.
* @return: 0 on success or negative error code on failure.
+ * TODO: currently only 666 and TFT as DI setup supported
*/
static int mx3fb_set_par(void)
{
int ret;
- ret = sdc_init_panel(XRES, YRES, PIXEL_FMT);
+ ret = sdc_init_panel(panel.plnSizeX, panel.plnSizeY,
+ IPU_PIX_FMT_RGB666, IPU_PANEL_TFT);
if (ret < 0)
return ret;
- reg_write((H_START_WIDTH << 16) | V_START_WIDTH, SDC_BG_POS);
+ writel((mode->left_margin << 16) | mode->upper_margin, SDC_BG_POS);
return 0;
}
-/* References in this function refer to respective Linux kernel sources */
-void lcd_enable(void)
+static void ll_disp3_enable(void *base)
{
u32 reg;
+ debug("%s(base=0x%x)\n", __func__, (u32) base);
/* pcm037.c::mxc_board_init() */
/* Display Interface #3 */
@@ -780,78 +742,191 @@ void lcd_enable(void)
/* ipu_idmac.c::ipu_idmac_init() */
/* Service request counter to maximum - shouldn't be needed */
- reg_write(0x00000070, IDMAC_CONF);
+ writel(0x00000070, IDMAC_CONF);
/* ipu_idmac.c::ipu_init_channel() */
/* Enable IPU sub modules */
- reg = reg_read(IPU_CONF) | IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
- reg_write(reg, IPU_CONF);
+ reg = readl(IPU_CONF) | IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+ writel(reg, IPU_CONF);
/* mx3fb.c::init_fb_chan() */
/* set Display Interface clock period */
- reg_write(0x00100010L, DI_HSP_CLK_PER);
+ writel(0x00100010L, DI_HSP_CLK_PER);
/* Might need to trigger HSP clock change - see 44.3.3.8.5 */
/* mx3fb.c::sdc_set_brightness() */
/* This might be board-specific */
- reg_write(0x03000000UL | 255 << 16, SDC_PWM_CTRL);
+ writel(0x03000000UL | 255 << 16, SDC_PWM_CTRL);
/* mx3fb.c::sdc_set_global_alpha() */
/* Use global - not per-pixel - Alpha-blending */
- reg = reg_read(SDC_GW_CTRL) & 0x00FFFFFFL;
- reg_write(reg | ((uint32_t) 0xff << 24), SDC_GW_CTRL);
+ reg = readl(SDC_GW_CTRL) & 0x00FFFFFFL;
+ writel(reg | ((uint32_t) 0xff << 24), SDC_GW_CTRL);
- reg = reg_read(SDC_COM_CONF);
- reg_write(reg | SDC_COM_GLB_A, SDC_COM_CONF);
+ reg = readl(SDC_COM_CONF);
+ writel(reg | SDC_COM_GLB_A, SDC_COM_CONF);
/* mx3fb.c::sdc_set_color_key() */
/* Disable colour-keying for background */
- reg = reg_read(SDC_COM_CONF) &
+ reg = readl(SDC_COM_CONF) &
~(SDC_COM_GWSEL | SDC_COM_KEY_COLOR_G);
- reg_write(reg, SDC_COM_CONF);
+ writel(reg, SDC_COM_CONF);
mx3fb_set_par();
- sdc_enable_channel(lcd_base);
+ sdc_enable_channel(base);
/*
* Linux driver calls sdc_set_brightness() here again,
* once is enough for us
*/
+ debug("%s() done\n", __func__);
}
-void lcd_ctrl_init(void *lcdbase)
+/* ------------------------ public part ------------------- */
+ulong calc_fbsize(void)
{
- u32 mem_len = XRES * YRES * BIT_PER_PIXEL / 8;
- /*
- * We rely on lcdbase being a physical address, i.e., either MMU off,
- * or 1-to-1 mapping. Might want to add some virt2phys here.
- */
- if (!lcdbase)
- return;
-
- memset(lcdbase, 0, mem_len);
+ return panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP;
}
-ulong calc_fbsize(void)
+/*
+ * The current implementation is only tested for GDF_16BIT_565RGB!
+ * It was switched from the original CONFIG_LCD setup to CONFIG_VIDEO,
+ * because the lcd code seemed loaded with color table stuff, that
+ * does not relate to most modern TFTs. cfb_console.c looks more
+ * straight forward.
+ * This is the environment setting for the original setup
+ * "unknown=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,
+ * up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0"
+ * "videomode=unknown"
+ *
+ * Settings for VBEST VGG322403 display:
+ * "videomode=video=ctfb:x:320,y:240,depth:16,mode:0,pclk:156000,
+ * "le:20,ri:68,up:7,lo:29,hs:30,vs:3,sync:100663296,vmode:0"
+ *
+ * Settings for COM57H5M10XRC display:
+ * "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000,
+ * "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296,vmode:0"
+ */
+void *video_hw_init(void)
{
- return ((panel_info.vl_col * panel_info.vl_row *
- NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+ char *penv;
+ u32 memsize;
+ unsigned long t1, hsynch, vsynch;
+ int bits_per_pixel, i, tmp, vesa_idx = 0, videomode;
+
+ tmp = 0;
+
+ puts("Video: ");
+
+ videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
+ /* get video mode via environment */
+ penv = getenv("videomode");
+ if (penv) {
+ /* decide if it is a string */
+ if (penv[0] <= '9') {
+ videomode = (int) simple_strtoul(penv, NULL, 16);
+ tmp = 1;
+ }
+ } else {
+ tmp = 1;
+ }
+ if (tmp) {
+ /* parameter are vesa modes */
+ /* search params */
+ for (i = 0; i < VESA_MODES_COUNT; i++) {
+ if (vesa_modes[i].vesanr == videomode)
+ break;
+ }
+ if (i == VESA_MODES_COUNT) {
+ printf("No VESA Mode found, switching to mode 0x%x ",
+ CONFIG_SYS_DEFAULT_VIDEO_MODE);
+ i = 0;
+ }
+ mode = (struct ctfb_res_modes *)
+ &res_mode_init[vesa_modes[i].resindex];
+ bits_per_pixel = vesa_modes[i].bits_per_pixel;
+ vesa_idx = vesa_modes[i].resindex;
+ } else {
+ mode = (struct ctfb_res_modes *) &var_mode;
+ bits_per_pixel = video_get_params(mode, penv);
+ }
+
+ /* calculate hsynch and vsynch freq (info only) */
+ t1 = (mode->left_margin + mode->xres +
+ mode->right_margin + mode->hsync_len) / 8;
+ t1 *= 8;
+ t1 *= mode->pixclock;
+ t1 /= 1000;
+ hsynch = 1000000000L / t1;
+ t1 *= (mode->upper_margin + mode->yres +
+ mode->lower_margin + mode->vsync_len);
+ t1 /= 1000;
+ vsynch = 1000000000L / t1;
+
+ /* fill in Graphic device struct */
+ sprintf(panel.modeIdent, "%dx%dx%d %ldkHz %ldHz",
+ mode->xres, mode->yres,
+ bits_per_pixel, (hsynch / 1000), (vsynch / 1000));
+ printf("%s\n", panel.modeIdent);
+ panel.winSizeX = mode->xres;
+ panel.winSizeY = mode->yres;
+ panel.plnSizeX = mode->xres;
+ panel.plnSizeY = mode->yres;
+
+ switch (bits_per_pixel) {
+ case 24:
+ panel.gdfBytesPP = 4;
+ panel.gdfIndex = GDF_32BIT_X888RGB;
+ break;
+ case 16:
+ panel.gdfBytesPP = 2;
+ panel.gdfIndex = GDF_16BIT_565RGB;
+ break;
+ default:
+ panel.gdfBytesPP = 1;
+ panel.gdfIndex = GDF__8BIT_INDEX;
+ break;
+ }
+
+ /* set up Hardware */
+ memsize = calc_fbsize();
+
+ debug("%s() allocating %d bytes\n", __func__, memsize);
+
+ /* fill in missing Graphic device struct */
+ panel.frameAdrs = (u32) malloc(memsize);
+ if (panel.frameAdrs == 0) {
+ printf("%s() malloc(%d) failed\n", __func__, memsize);
+ return 0;
+ }
+ panel.memSize = memsize;
+
+ ll_disp3_enable((void *) panel.frameAdrs);
+ memset((void *) panel.frameAdrs, 0, memsize);
+
+ debug("%s() done, framebuffer at 0x%x, size=%d cleared\n",
+ __func__, panel.frameAdrs, memsize);
+
+ return (void *) &panel;
}
-int overwrite_console(void)
+void video_set_lut(unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ )
{
- /* Keep stdout / stderr on serial, our LCD is for splashscreen only */
- return 1;
+ return;
}
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 61f0534..48bd50b 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -53,7 +53,7 @@
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
/*
* Hardware drivers
@@ -104,7 +104,8 @@
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"prg_uboot=tftpboot 0x80000000 $(uboot); protect off 0xa0000000 +0x20000; erase 0xa0000000 +0x20000; cp.b 0x80000000 0xa0000000 $(filesize)\0" \
"prg_kernel=tftpboot 0x80000000 $(uimage); erase 0xa0040000 +0x180000; cp.b 0x80000000 0xa0040000 $(filesize)\0" \
- "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0"
+ "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0" \
+ "videomode=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:1241513985,vmode:0\0"
#define CONFIG_SMC911X 1
@@ -201,15 +202,16 @@
#define CONFIG_S6E63D6 1
-#define CONFIG_LCD 1
-#define CONFIG_VIDEO_MX3 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-#define CONFIG_SPLASH_SCREEN 1
-#define CONFIG_CMD_BMP 1
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MX3
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/qong.h b/include/configs/qong.h
index e4bc1d0..b1fc80c 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -79,15 +79,16 @@
#define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE)
/* Framebuffer and LCD */
-#define CONFIG_LCD
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_MX3
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define LCD_BPP LCD_COLOR16
-#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
-#define CONFIG_DISPLAY_COM57H5M10XRC
/* USB */
#define CONFIG_CMD_USB
@@ -177,6 +178,9 @@
" +${filesize};cp.b ${fileaddr} " \
xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
+ "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000," \
+ "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296," \
+ "vmode:0\0" \
/*
* Miscellaneous configurable options
--
1.7.1
More information about the U-Boot
mailing list