[U-Boot] [RESEND PATCH v2] tegra2: Enable data cache

Stephen Warren swarren at nvidia.com
Fri Oct 14 17:04:05 CEST 2011


Simon Glass wrote at Thursday, October 13, 2011 6:18 PM:
> On Thu, Oct 13, 2011 at 5:06 PM, Tom Warren <TWarren at nvidia.com> wrote:
> > Simon Glass wrote at Wednesday, October 12, 2011 2:13 PM:
...
> >> Yes that's right since yesterday's merge of MMC into u-boot-arm (prior
> >> to that there was no working MMC!). Let's hold off applying this patch
> >> until you are done.
> >>
> >
> > I have to disagree with the 'no working MMC' statement. When I submitted my Tegra2 MMC driver in
> > May, it was working fine on Seaboard (hadn't tested yet on Harmony since mine was dead). At that time,
> > DCACHE was off, so no concurrency issues nor hangs were seen. Wolfgang merged it w/master in mid-July.
> >
> > Just correcting for the record,
> 
> Yes I suspect you are right, it could just be my Seaboard - I have a
> different one from what I was using a few months ago. With this new
> one I see:

I think the issue is that MMC/SD work OK with Tom's patch "tegra2: Enable
MMC for Seaboard", which isn't yet merged into mainline U-Boot. Without
that, neither the MMC nor SD slot worked for me.

For Harmony you'll need my patch "tegra2: Move board_mmc_init into board
files", which is part of a series that's not yet merged.

-- 
nvpublic



More information about the U-Boot mailing list