[U-Boot] [PATCH 01/15 V3] iMX28: Initial support for iMX28 CPU
Wolfgang Denk
wd at denx.de
Fri Oct 14 23:01:23 CEST 2011
Dear Marek Vasut,
In message <1317375728-23802-1-git-send-email-marek.vasut at gmail.com> you wrote:
> This patch supports:
> - Timers
> - Debug UART
> - Clock
>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Wolfgang Denk <wd at denx.de>
> Cc: Detlev Zundel <dzu at denx.de>
> ---
> arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +
> arch/arm/cpu/arm926ejs/mx28/clock.c | 355 +++++++
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 194 ++++
> arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++
> arch/arm/include/asm/arch-mx28/clock.h | 61 ++
> arch/arm/include/asm/arch-mx28/imx-regs.h | 38 +
> arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
> arch/arm/include/asm/arch-mx28/regs-bch.h | 230 +++++
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 ++++++
> arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++
> arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 +++++
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 ++++
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284 +++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx28/regs-power.h | 413 ++++++++
> arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 +++++++
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 ++++
> arch/arm/include/asm/arch-mx28/sys_proto.h | 30 +
> 19 files changed, 4527 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
> create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
> create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
> create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
...
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/arch/iomux-mx28.h>
You include <asm/arch/iomux-mx28.h> here, but add this file only in
patch # 4 of your series. That means your patches are not bisectable.
Please fix.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Man did not weave the web of life; he is merely a strand in it.
Whatever he does to the web, he does to himself. - Seattle [1854]
More information about the U-Boot
mailing list