[U-Boot] [PATCH v4 1/2] NS16550: trivial code clean for checkpatch

[Simon Glass]

This removes most checkpatch warnings from the ns16550 driver and its
header.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
 drivers/serial/ns16550.c |   37 ++++++++++++++++++++-----------------
 include/ns16550.h        |   16 ++++++++--------
 2 files changed, 28 insertions(+), 25 deletions(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 0174744..056c25d 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -17,24 +17,24 @@
 		     UART_FCR_RXSR |	\
 		     UART_FCR_TXSR)		/* Clear & enable FIFOs */
 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED
-#define serial_out(x,y)	outb(x,(ulong)y)
-#define serial_in(y)	inb((ulong)y)
+#define serial_out(x, y)	outb(x, (ulong)y)
+#define serial_in(y)		inb((ulong)y)
 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0)
-#define serial_out(x,y) out_be32(y,x)
-#define serial_in(y) 	in_be32(y)
+#define serial_out(x, y)	out_be32(y, x)
+#define serial_in(y)		in_be32(y)
 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0)
-#define serial_out(x,y) out_le32(y,x)
-#define serial_in(y) 	in_le32(y)
+#define serial_out(x, y)	out_le32(y, x)
+#define serial_in(y)		in_le32(y)
 #else
-#define serial_out(x,y) writeb(x,y)
-#define serial_in(y) 	readb(y)
+#define serial_out(x, y)	writeb(x, y)
+#define serial_in(y)		readb(y)
 #endif
 
 #ifndef CONFIG_SYS_NS16550_IER
 #define CONFIG_SYS_NS16550_IER  0x00
 #endif /* CONFIG_SYS_NS16550_IER */
 
-void NS16550_init (NS16550_t com_port, int baud_divisor)
+void NS16550_init(NS16550_t com_port, int baud_divisor)
 {
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
@@ -52,15 +52,17 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 	serial_out(UART_LCRVAL, &com_port->lcr);
 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
 #if defined(CONFIG_APTIX)
-	serial_out(3, &com_port->mdr1);	/* /13 mode so Aptix 6MHz can hit 115200 */
+	/* /13 mode so Aptix 6MHz can hit 115200 */
+	serial_out(3, &com_port->mdr1);
 #else
-	serial_out(0, &com_port->mdr1);	/* /16 is proper to hit 115200 with 48MHz */
+	/* /16 is proper to hit 115200 with 48MHz */
+	serial_out(0, &com_port->mdr1);
 #endif
 #endif /* CONFIG_OMAP */
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
-void NS16550_reinit (NS16550_t com_port, int baud_divisor)
+void NS16550_reinit(NS16550_t com_port, int baud_divisor)
 {
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
@@ -76,9 +78,10 @@ void NS16550_reinit (NS16550_t com_port, int baud_divisor)
 }
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
 
-void NS16550_putc (NS16550_t com_port, char c)
+void NS16550_putc(NS16550_t com_port, char c)
 {
-	while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0);
+	while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0)
+		;
 	serial_out(c, &com_port->thr);
 
 	/*
@@ -92,7 +95,7 @@ void NS16550_putc (NS16550_t com_port, char c)
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
-char NS16550_getc (NS16550_t com_port)
+char NS16550_getc(NS16550_t com_port)
 {
 	while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
 #ifdef CONFIG_USB_TTY
@@ -104,9 +107,9 @@ char NS16550_getc (NS16550_t com_port)
 	return serial_in(&com_port->rbr);
 }
 
-int NS16550_tstc (NS16550_t com_port)
+int NS16550_tstc(NS16550_t com_port)
 {
-	return ((serial_in(&com_port->lsr) & UART_LSR_DR) != 0);
+	return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0;
 }
 
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
diff --git a/include/ns16550.h b/include/ns16550.h
index 51f1c17..e9d2eda 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -65,12 +65,12 @@ struct NS16550 {
 #define dll rbr
 #define dlm ier
 
-typedef volatile struct NS16550 *NS16550_t;
+typedef struct NS16550 *NS16550_t;
 
 /*
  * These are the definitions for the FIFO Control Register
  */
-#define UART_FCR_FIFO_EN 	0x01 /* Fifo enable */
+#define UART_FCR_FIFO_EN	0x01 /* Fifo enable */
 #define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
 #define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
 #define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
@@ -106,7 +106,7 @@ typedef volatile struct NS16550 *NS16550_t;
 #define UART_LCR_WLS_6	0x01		/* 6 bit character length */
 #define UART_LCR_WLS_7	0x02		/* 7 bit character length */
 #define UART_LCR_WLS_8	0x03		/* 8 bit character length */
-#define UART_LCR_STB	0x04		/* Number of stop Bits, off = 1, on = 1.5 or 2) */
+#define UART_LCR_STB	0x04		/* # stop Bits, off=1, on=1.5 or 2) */
 #define UART_LCR_PEN	0x08		/* Parity eneble */
 #define UART_LCR_EPS	0x10		/* Even Parity Select */
 #define UART_LCR_STKP	0x20		/* Stick Parity */
@@ -162,8 +162,8 @@ typedef volatile struct NS16550 *NS16550_t;
 /* useful defaults for LCR */
 #define UART_LCR_8N1	0x03
 
-void	NS16550_init   (NS16550_t com_port, int baud_divisor);
-void	NS16550_putc   (NS16550_t com_port, char c);
-char	NS16550_getc   (NS16550_t com_port);
-int	NS16550_tstc   (NS16550_t com_port);
-void	NS16550_reinit (NS16550_t com_port, int baud_divisor);
+void NS16550_init(NS16550_t com_port, int baud_divisor);
+void NS16550_putc(NS16550_t com_port, char c);
+char NS16550_getc(NS16550_t com_port);
+int NS16550_tstc(NS16550_t com_port);
+void NS16550_reinit(NS16550_t com_port, int baud_divisor);
-- 
1.7.3.1