[U-Boot] [PATCH] ehci-fsl: correct size of ehci caplength

[Wolfgang Grandegger]

According to the EHCI specification the Capability Register Length
has a size of 8 bits.

Signed-off-by: Wolfgang Grandegger <wg at denx.de>
---
 include/usb/ehci-fsl.h |   25 +++++++++++++------------
 1 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index 67600ed..f50a8f2 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -186,35 +186,36 @@ struct usb_ehci {
 	u32     gptimer1_ctrl;	/* 0x08C - General Purpose Timer 1 control */
 	u32	sbuscfg;	/* 0x090 - System Bus Interface Control */
 	u8	res2[0x6C];
-	u16	caplength;	/* 0x100 - Capability Register Length */
+	u8	caplength;	/* 0x100 - Capability Register Length */
+	u8	res3[0x1];
 	u16	hciversion;	/* 0x102 - Host Interface Version */
 	u32	hcsparams;	/* 0x104 - Host Structural Parameters */
 	u32	hccparams;	/* 0x108 - Host Capability Parameters */
-	u8	res3[0x14];
+	u8	res4[0x14];
 	u32	dciversion;	/* 0x120 - Device Interface Version */
 	u32	dciparams;	/* 0x124 - Device Controller Params */
-	u8	res4[0x18];
+	u8	res5[0x18];
 	u32	usbcmd;		/* 0x140 - USB Command */
 	u32	usbsts;		/* 0x144 - USB Status */
 	u32	usbintr;	/* 0x148 - USB Interrupt Enable */
 	u32	frindex;	/* 0x14C - USB Frame Index */
-	u8	res5[0x4];
+	u8	res6[0x4];
 	u32	perlistbase;	/* 0x154 - Periodic List Base
 					 - USB Device Address */
 	u32	ep_list_addr;	/* 0x158 - Next Asynchronous List
 					 - End Point Address */
-	u8	res6[0x4];
+	u8	res7[0x4];
 	u32	burstsize;	/* 0x160 - Programmable Burst Size */
 #define FSL_EHCI_TXPBURST(X)	((X) << 8)
 #define FSL_EHCI_RXPBURST(X)	(X)
 	u32	txfilltuning;	/* 0x164 - Host TT Transmit
 					   pre-buffer packet tuning */
-	u8	res7[0x8];
+	u8	res8[0x8];
 	u32	ulpi_viewpoint;	/* 0x170 - ULPI Reister Access */
-	u8	res8[0xc];
+	u8	res9[0xc];
 	u32	config_flag;	/* 0x180 - Configured Flag Register */
 	u32	portsc;		/* 0x184 - Port status/control */
-	u8	res9[0x1C];
+	u8	res10[0x1C];
 	u32	otgsc;		/* 0x1a4 - Oo-The-Go status and control */
 	u32	usbmode;	/* 0x1a8 - USB Device Mode */
 	u32	epsetupstat;	/* 0x1ac - End Point Setup Status */
@@ -228,18 +229,18 @@ struct usb_ehci {
 	u32	epctrl3;	/* 0x1cc - End Point Control 3 */
 	u32	epctrl4;	/* 0x1d0 - End Point Control 4 */
 	u32	epctrl5;	/* 0x1d4 - End Point Control 5 */
-	u8	res10[0x28];
+	u8	res11[0x28];
 	u32	usbgenctrl;	/* 0x200 - USB General Control */
 	u32	isiphyctrl;	/* 0x204 - On-Chip PHY Control */
-	u8	res11[0x1F8];
+	u8	res12[0x1F8];
 	u32	snoop1;		/* 0x400 - Snoop 1 */
 	u32	snoop2;		/* 0x404 - Snoop 2 */
 	u32	age_cnt_limit;	/* 0x408 - Age Count Threshold */
 	u32	prictrl;	/* 0x40c - Priority Control */
 	u32	sictrl;		/* 0x410 - System Interface Control */
-	u8	res12[0xEC];
+	u8	res13[0xEC];
 	u32	control;	/* 0x500 - Control */
-	u8	res13[0xafc];
+	u8	res14[0xafc];
 };
 
 #endif /* _EHCI_FSL_H */
-- 
1.7.4.1