[U-Boot] [PATCH 3/7] omap/spl: actually enable the console

[Ilya Yanok]

Currently OMAP SPL code does all the initialization but does not set the
gd->have_console value so no output is actually performed. This patch
sets gd->have_console to 1 if CONFIG_SPL_CONSOLE is defined.

Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
 arch/arm/cpu/armv7/omap-common/spl.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index f28411b..3d3e95c 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -152,6 +152,10 @@ void preloader_console_init(void)
 
 	serial_init();		/* serial communications setup */
 
+#ifdef CONFIG_SPL_CONSOLE
+	gd->have_console = 1;
+#endif
+
 	/* Avoid a second "U-Boot" coming from this string */
 	u_boot_rev = &u_boot_rev[7];
 
-- 
1.7.6.4