[U-Boot] [PATCH 7/7][v2] fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)

[Wolfgang Denk]

Dear Kumar Gala,

In message <1312555480-13401-8-git-send-email-galak at kernel.crashing.org> you wrote:
> From: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> 
> Issue: Address masking doesn't work properly.
> When sum of the base address, defined by BA, and memory bank size,
> defined by AM, exceeds 4GB (0xffff_ffff) then AMASKn[AM] doesn't mask
> CSPRn[BA] bits.
> 
> Impact:
> This will impact booting when we are reprogramming CSPR0(BA) and
> AMASK0(AMASK) while executing from NOR Flash.
> 
> Workaround:
> Re-programming of CSPR(BA) and AMASK is done while not executing from NOR
> Flash. The code which programs the BA and AMASK is executed from L2-SRAM.
> 
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>

This commit introdces new build warnings for the following boards:

	P1010RDB_36BIT_NOR                  P1010RDB_NOR
	P1010RDB_36BIT_NOR_SECBOOT          P1010RDB_NOR_SECBOOT

For example:

Configuring for P1010RDB_NOR - Board: P1010RDB, Options: P1010RDB
cpu_init_early.c: In function 'cpu_init_early_f':
cpu_init_early.c:74: warning: 'l2srbar' may be used uninitialized in this function


Please fix!


Kumar, Poonam - I'm really p*ssed off.  Both of you have more than
enough of experience to know that you should not submit
untested patches.  especially here, where I already had to reject this
patch because it did not even pass checkpatch:

I wrote in message <20110804212403.3D53221C695 at gemini.denx.de>:

| Dear Kumar Gala,
| 
| In message <08144324-BE32-4A54-BC2D-B920F18F3D43 at kernel.crashing.org>
| you wrote:
| > 
| > > Kumar,  could you __please__ get used to running your patches
| > > throuch
| > > checkpatch __before__ submitting?  Thanks.
| > 
| > I try to, but not all of them are by me ;)
| 
| I know.  But you submitted them, so you are responsible.


This level of neglect is really disappointing.


Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
1000 pains                                              = 1 Megahertz