[U-Boot] [PATCH v17 3/9] nds32/core N1213: NDS32 N12 core family N1213

[Wolfgang Denk]

Dear Macpaul Lin,

In message <1319092871-28135-3-git-send-email-macpaul at andestech.com> you wrote:
> Add N1213 cpu core (N12 Core family) support for NDS32 arch.
> This patch includes start.S for the initialize procedure of N1213.
> 
> Start procedure:
>  start.S will start up the N1213 CPU core at first,
>  then jump to SoC dependent "lowlevel_init.S" and
>  "watchdog.S" to configure peripheral devices.
> 
> Signed-off-by: Macpaul Lin <macpaul at andestech.com>
> Signed-off-by: Greentime Hu <greentime at andestech.com>
> ---
> Changes for v1 to v6:
>   - Style clean up and reorganize code
> Changes for v7-v9:
>   - No Change.
> Changes for v10:
>   - start.S of N1213 CPU has been rewrote for relocation support.
>   - u-boot.lds:
>    - Add got and *(.got.plt) section for support GCC 4 toolchain
>    - Modified for relocation implementation.
> Changes for v11:
>   - arch/nds32/cpu/n1213/Makefile
>    - replace $(AR) $(call cmd_link_o_target,...)
> Changes for v12:
>   - u-boot.lds
>    - Remove the 0x00000000 base address in linker script.
>      The base address of the binary will be determined by CONFIG_SYS_TEXT_BASE
>   - Remove the CPU features in commit log and add to README in later patches.
> Changes for v13-v14:
>   - No change.
> Changes for v15:
>   - start.S: fix exception vector aligment (add setivb in reset vector).
> Changes for v16:
>   - start.S: remove lines over 80 characters.
> Changes for v17:
>   - Fix a space ident warning which checkpatch doesn't found.
> 
>  arch/nds32/cpu/n1213/Makefile   |   50 ++++
>  arch/nds32/cpu/n1213/start.S    |  529 +++++++++++++++++++++++++++++++++++++++
>  arch/nds32/cpu/n1213/u-boot.lds |   70 +++++
>  3 files changed, 649 insertions(+), 0 deletions(-)
>  create mode 100644 arch/nds32/cpu/n1213/Makefile
>  create mode 100644 arch/nds32/cpu/n1213/start.S
>  create mode 100644 arch/nds32/cpu/n1213/u-boot.lds

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All he had was nothing, but that was something, and now it  had  been
taken away.                             - Terry Pratchett, _Sourcery_