[U-Boot] [Patch v2 6/7] powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver

[Wolfgang Denk]

Dear Kumar Gala,

In message <2A6300E8-A874-49AC-84CB-BE681AF1BF90 at freescale.com> you wrote:
> 
> On Aug 26, 2011, at 1:32 PM, York Sun wrote:
> 
> > Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c.
> > The unified driver can initialize data using DDR controller. No need to
> > use DMA if just to initialze for ECC.
> > 
> > Signed-off-by: York Sun <yorksun at freescale.com>
> > Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
> > ---
> > board/freescale/mpc8349emds/Makefile      |    1 +
> > board/freescale/mpc8349emds/ddr.c         |  107 +++++++++++++++++++++++++++++
> > board/freescale/mpc8349emds/mpc8349emds.c |   26 ++++---
> > include/configs/MPC8349EMDS.h             |   16 ++++
> > 4 files changed, 139 insertions(+), 11 deletions(-)
> > create mode 100644 board/freescale/mpc8349emds/ddr.c
> 
> applied to 85xx 'next'

Did you test it???


This patch breaks out-of-tree building of the MPC8349EMDS board:

+ MAKEALL_LOGDIR=/work/wd/tmp-ppc-LOG
+ BUILD_DIR=/work/wd/tmp-ppc
+ ./MAKEALL MPC8349EMDS
Configuring for MPC8349EMDS board...
make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'.  Stop.
make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'.  Stop.
make: *** [depend] Error 2

[Local building works.]


Note also that "make distclean" still leaves a file
arch/powerpc/cpu/mpc83xx/ddr-gen2.c

Please fix this, too.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Overflow on /dev/null, please empty the bit bucket.