[U-Boot] [PATCH v7 1/4] tegra2: Move MMC clock initialization into MMC driver

Simon Glass sjg at chromium.org
Mon Oct 31 19:08:58 CET 2011


Hi Stephen,

On Mon, Oct 31, 2011 at 9:51 AM, Stephen Warren <swarren at nvidia.com> wrote:
> This centralizes knowledge of MMC clocking into the MMC driver. This also
> removes clock setup from the board files, which will simplify later changes
> that modify the Harmony board to support the correct set of MMC controllers.
>
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> Cc: Andy Fleming <afleming at gmail.com>
> Acked-by: Simon Glass <sjg at chromium.org>
> Tested-by: Simon Glass <sjg at chromium.org>

I retested this new patch series with the latest master (mmc part,
ext2ls and ext2load) and it is fine.

Regards,
Simon

> ---
>  board/nvidia/common/board.c |   13 +------------
>  drivers/mmc/tegra2_mmc.c    |   12 +++++++++---
>  2 files changed, 10 insertions(+), 15 deletions(-)
>
> diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
> index d13537d..370a259 100644
> --- a/board/nvidia/common/board.c
> +++ b/board/nvidia/common/board.c
> @@ -102,16 +102,6 @@ static void pin_mux_uart(void)
>
>  #ifdef CONFIG_TEGRA2_MMC
>  /*
> - * Routine: clock_init_mmc
> - * Description: init the PLL and clocks for the SDMMC controllers
> - */
> -static void clock_init_mmc(void)
> -{
> -       clock_start_periph_pll(PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH, 20000000);
> -       clock_start_periph_pll(PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH, 20000000);
> -}
> -
> -/*
>  * Routine: pin_mux_mmc
>  * Description: setup the pin muxes/tristate values for the SDMMC(s)
>  */
> @@ -157,8 +147,7 @@ int board_init(void)
>  int board_mmc_init(bd_t *bd)
>  {
>        debug("board_mmc_init called\n");
> -       /* Enable clocks, muxes, etc. for SDMMC controllers */
> -       clock_init_mmc();
> +       /* Enable muxes, etc. for SDMMC controllers */
>        pin_mux_mmc();
>        gpio_config_mmc();
>
> diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c
> index 9e741f2..78b1190 100644
> --- a/drivers/mmc/tegra2_mmc.c
> +++ b/drivers/mmc/tegra2_mmc.c
> @@ -435,14 +435,22 @@ static int mmc_core_init(struct mmc *mmc)
>
>  static int tegra2_mmc_initialize(int dev_index, int bus_width)
>  {
> +       struct mmc_host *host;
>        struct mmc *mmc;
>
>        debug(" mmc_initialize called\n");
>
> +       host = &mmc_host[dev_index];
> +
> +       host->clock = 0;
> +       tegra2_get_setup(host, dev_index);
> +
> +       clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
> +
>        mmc = &mmc_dev[dev_index];
>
>        sprintf(mmc->name, "Tegra2 SD/MMC");
> -       mmc->priv = &mmc_host[dev_index];
> +       mmc->priv = host;
>        mmc->send_cmd = mmc_send_cmd;
>        mmc->set_ios = mmc_set_ios;
>        mmc->init = mmc_core_init;
> @@ -465,8 +473,6 @@ static int tegra2_mmc_initialize(int dev_index, int bus_width)
>        mmc->f_min = 375000;
>        mmc->f_max = 48000000;
>
> -       mmc_host[dev_index].clock = 0;
> -       tegra2_get_setup(&mmc_host[dev_index], dev_index);
>        mmc_register(mmc);
>
>        return 0;
> --
> 1.7.0.4
>
>


More information about the U-Boot mailing list