[U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h

[Allen Martin]

On Tue, Oct 23, 2012 at 03:01:21PM -0700, Marek Vasut wrote:
> Dear Stephen Warren,
> 
> > On 10/23/2012 01:27 AM, Marek Vasut wrote:
> > > Dear Allen Martin,
> > > 
> > >> Move environment settings for stdin/stdout/stderr to
> > >> tegra-common-post.h and generate them automaticaly based on input
> > >> device selection.
> > >> 
> > >> Signed-off-by: Allen Martin <amartin at nvidia.com>
> > > 
> > > 2/3 and 3/3 should go through tegra, thanks
> > 
> > Although of course patches 2 & 3 depend on patch 1. So, the process
> > would have to be:
> > 
> > 1) Apply patch 1 to USB tree.
> > 2) Send pull request for USB to main U-Boot repo.
> > 3) Pull request actioned.
> > 4) Wait until latest u-boot/master is picked in u-boot/arm and hence
> > u-boot/tegra.
> > 5) Apply patches 2 & 3 to the Tegra tree.
> > 
> > That's quite a long round-trip. What's the typical delay between (1) and
> > (2) or (3) and (4)?
> > 
> > In the Linux kernel, this would be handled by putting patch (1) into a
> > topic branch on its own, which can then be merged into both the USB
> > branch and immediately into Tegra's branch. Of course, that all relies
> > on never rebasing during pull requests (otherwise, the branch with patch
> > 1 might end up being applied as two different commits when merging into
> > u-boot/master); something which apparently isn't acceptable for U-Boot:-(
> 
> Fine, then if you agree, I'll pull them all through usb tree ?

Hi Marek, I just wanted to check on that status of this series.  Were
you going to apply them to u-boot-usb ?

Thanks,
-Allen
-- 
nvpublic