[U-Boot] [PATCH] net: sh_eth: add support for SH7752
Shimoda, Yoshihiro
yoshihiro.shimoda.uh at renesas.com
Mon Nov 5 02:54:30 CET 2012
SH7752 has two fast ethernet controllers and two gigabit ethernet
controllers. It is similar to SH7757.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
---
drivers/net/sh_eth.c | 4 ++--
drivers/net/sh_eth.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 2d9cc32..e6fc8c8 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -417,7 +417,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
printf(SHETHER_NAME ": 100Base/");
#if defined(SH_ETH_TYPE_GETHER)
sh_eth_write(eth, GECMR_100B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
sh_eth_write(eth, 1, RTRATE);
#elif defined(CONFIG_CPU_SH7724)
val = ECMR_RTM;
@@ -426,7 +426,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
printf(SHETHER_NAME ": 10Base/");
#if defined(SH_ETH_TYPE_GETHER)
sh_eth_write(eth, GECMR_10B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
sh_eth_write(eth, 0, RTRATE);
#endif
}
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 61d2df9..568fafe 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -288,7 +288,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xfee00000
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
#if defined(CONFIG_SH_ETHER_USE_GETHER)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xfee00000
@@ -346,7 +346,7 @@ enum DMAC_T_BIT {
/* GECMR */
enum GECMR_BIT {
-#if defined(CONFIG_CPU_SH7757)
+#if defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
GECMR_1000B = 0x20, GECMR_100B = 0x01, GECMR_10B = 0x00,
#else
GECMR_1000B = 0x01, GECMR_100B = 0x04, GECMR_10B = 0x00,
--
1.7.1
More information about the U-Boot
mailing list