[U-Boot] [PATCH 06/13] ehci-mx5: Fix *PM usage for i.MX53

[Benoît Thébaudeau]

The MXC_*_UCTRL_*PM_BIT bits are available only on i.MX51.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
 .../drivers/usb/host/ehci-mx5.c                                  |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git u-boot-usb-76454b2.orig/drivers/usb/host/ehci-mx5.c u-boot-usb-76454b2/drivers/usb/host/ehci-mx5.c
index bd1f119..8e42e56 100644
--- u-boot-usb-76454b2.orig/drivers/usb/host/ehci-mx5.c
+++ u-boot-usb-76454b2/drivers/usb/host/ehci-mx5.c
@@ -153,10 +153,12 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 					MXC_USB_PHY_CTR_FUNC_OFFSET);
 
 			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 				v &= ~MXC_OTG_UCTRL_OPM_BIT;
 			else
 				v |= MXC_OTG_UCTRL_OPM_BIT;
+#endif
 			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 		}
 		break;
@@ -170,10 +172,12 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 #endif
 
 		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused */
 		else
 			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */
+#endif
 		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 
 		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
@@ -186,10 +190,12 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 		break;
 	case 2: /* Host 2 ULPI */
 		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+#ifdef CONFIG_MX51
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused */
 		else
 			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */
+#endif
 
 		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
 		break;