[U-Boot] [u-boot-release] [PATCH] powerpc/mpc8xxx: Fix compiling error caused in DDR driver

[Fleming Andy-AFLEMING]

On Nov 7, 2012, at 5:47 PM, York Sun wrote:

> mpc86xx platforms should use CONFIG_SYS_MPC86xx_DDR2_ADDR in utils.c
> if applicable.
> 
> Signed-off-by: York Sun <yorksun at freescale.com>
> ---
> arch/powerpc/cpu/mpc8xxx/ddr/util.c |    4 ++++
> 1 file changed, 4 insertions(+)
> 
> diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
> index 940ffff..9a07d9d 100644
> --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
> +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
> @@ -152,7 +152,11 @@ void board_add_ram_info(int use_default)
> 
> #if CONFIG_NUM_DDR_CONTROLLERS >= 2
> 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
> +#ifdef CONFIG_MPC86xx
> +		ddr = (void __iomem *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
> +#else
> 		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
> +#endif


Argh, I submitted a patch to fix this more completely, but haven't applied it, yet. See: http://patchwork.ozlabs.org/patch/193611/


Andy