[U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
albert.u.boot at aribaud.net
Fri Nov 16 00:50:49 CET 2012
Hi Minkyu,
On Thu, 15 Nov 2012 21:12:52 +0900, Minkyu Kang <mk7.kang at samsung.com>
wrote:
> Dear Albert,
>
> The following changes since commit ccfa398547ce0b579f2e7874e78948246c739237:
>
> arm1136: Fix enable_caches() (2012-11-10 12:28:22 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-samsung master
>
> for you to fetch changes up to 7a5337732e3e05b2b0de1b592fa031b2c7b4f632:
>
> EXYNOS5: Enable SPI booting. (2012-11-15 21:08:21 +0900)
>
> ----------------------------------------------------------------
> Ashok Kumar Reddy (1):
> ARM: arm1176: Define arch_cpu_init() for s3c64xx
>
> Chander Kashyap (1):
> Exynos5250: Enable PXE Support
>
> Hatim RV (3):
> EXYNOS: Add clock for SPI
> EXYNOS5: Add base address for SPI
> EXYNOS5: Enable SPI
>
> Marek Vasut (1):
> dm: wdt: Move s5p watchdog timer to drivers/watchdog/
>
> Minkyu Kang (3):
> ARCH: EXYNOS: add support to match product id
> EXYNOS: Clock: Add common function for pll rate calculation
> s3c64xx: fix the compiler error and warning
>
> Piotr Wilczek (12):
> arm:exynos4:trats: Correct SDRAM configuration for trats
> arm:exynos4:trats: Fix SDRAM size
> arm:exynos4:pinmux: Modify the gpio function for mmc
> arm:exynos4:trats: Use pinmux for mmc configuration
> arm:exynos4:universal: Use pinmux for mmc configuration
> arm:exynos4:universal: Eliminated low level init
> arm: trats: Power down core 1
> exynos4: universal_C210: use software SPI
> misc:max8998 Add LDO macros
> drivers: video: Add ld9040 video driver
> drivers: video: fix image position
> exynos4: universal_C210: add display support
>
> Rajeshwari Shinde (14):
> PMIC: MAX77686: Add support for MAX77686
> SMDK5250: Config: Enable MAX77686 pmic chip
> SOUND: SAMSUNG: Add I2S driver
> SOUND: Add WM8994 codec
> Sound: Add command for audio playback
> EXYNOS: Add I2S registers
> EXYNOS: Add parameters required by I2S
> EXYNOS: Add pinmux for I2S
> EXYNOS: Add I2S base address
> EXYNOS: Add clock for I2S
> SMDK5250: Enable Sound
> EXYNOS5: Add pinmux support for SPI
> SPI: Add SPI Driver for EXYNOS.
> EXYNOS5: Enable SPI booting.
>
> Łukasz Majewski (1):
> gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices
>
> Makefile | 1 +
> arch/arm/cpu/arm1176/s3c64xx/Makefile | 2 +-
> arch/arm/cpu/arm1176/s3c64xx/init.c | 26 +
> arch/arm/cpu/armv7/exynos/clock.c | 350 +++++++--
> arch/arm/cpu/armv7/exynos/pinmux.c | 122 +++
> arch/arm/cpu/armv7/s5p-common/Makefile | 1 -
> arch/arm/include/asm/arch-exynos/clk.h | 4 +
> arch/arm/include/asm/arch-exynos/clock.h | 29 +
> arch/arm/include/asm/arch-exynos/cpu.h | 18 +
> arch/arm/include/asm/arch-exynos/gpio.h | 19 +
> arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 ++
> arch/arm/include/asm/arch-exynos/periph.h | 7 +
> arch/arm/include/asm/arch-exynos/sound.h | 44 ++
> arch/arm/include/asm/arch-exynos/spi.h | 78 ++
> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 7 +-
> board/samsung/smdk5250/Makefile | 2 +-
> board/samsung/smdk5250/smdk5250.c | 8 +
> board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} | 31 +-
> board/samsung/trats/trats.c | 80 +-
> board/samsung/universal_c210/Makefile | 1 -
> board/samsung/universal_c210/lowlevel_init.S | 395 ----------
> board/samsung/universal_c210/universal.c | 335 +++++++--
> common/Makefile | 1 +
> common/cmd_sound.c | 96 +++
> drivers/gpio/s5p_gpio.c | 6 +-
> drivers/misc/Makefile | 1 +
> drivers/misc/pmic_max77686.c | 42 ++
> drivers/serial/s3c64xx.c | 3 +-
> drivers/sound/Makefile | 48 ++
> drivers/sound/samsung-i2s.c | 358 +++++++++
> drivers/sound/sound.c | 228 ++++++
> drivers/sound/wm8994.c | 792 ++++++++++++++++++++
> drivers/sound/wm8994.h | 87 +++
> drivers/sound/wm8994_registers.h | 299 ++++++++
> drivers/spi/Makefile | 1 +
> drivers/spi/exynos_spi.c | 367 +++++++++
> drivers/video/Makefile | 1 +
> drivers/video/exynos_fb.c | 15 +-
> drivers/video/ld9040.c | 144 ++++
> drivers/watchdog/Makefile | 1 +
> .../s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c | 0
> include/configs/s5pc210_universal.h | 36 +
> include/configs/smdk5250.h | 46 +-
> include/configs/trats.h | 17 +-
> include/i2s.h | 127 ++++
> include/ld9040.h | 32 +
> include/max77686_pmic.h | 158 ++++
> include/max8998_pmic.h | 2 +
> include/sound.h | 62 ++
> 49 files changed, 3983 insertions(+), 613 deletions(-)
> create mode 100644 arch/arm/cpu/arm1176/s3c64xx/init.c
> create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h
> create mode 100644 arch/arm/include/asm/arch-exynos/sound.h
> create mode 100644 arch/arm/include/asm/arch-exynos/spi.h
> rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%)
> delete mode 100644 board/samsung/universal_c210/lowlevel_init.S
> create mode 100644 common/cmd_sound.c
> create mode 100644 drivers/misc/pmic_max77686.c
> create mode 100644 drivers/sound/Makefile
> create mode 100644 drivers/sound/samsung-i2s.c
> create mode 100644 drivers/sound/sound.c
> create mode 100644 drivers/sound/wm8994.c
> create mode 100644 drivers/sound/wm8994.h
> create mode 100644 drivers/sound/wm8994_registers.h
> create mode 100644 drivers/spi/exynos_spi.c
> create mode 100644 drivers/video/ld9040.c
> rename arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c (100%)
> create mode 100644 include/i2s.h
> create mode 100644 include/ld9040.h
> create mode 100644 include/max77686_pmic.h
> create mode 100644 include/sound.h
>
(Was your master branch rebased?)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list