[U-Boot] [PATCH 17/57] ppc: Move mpc83xx clock fields to arch_global_data
Simon Glass
sjg at chromium.org
Fri Nov 16 22:20:02 CET 2012
Move al mpc83xx fields into arch_global_data and tidy up. Also indent
the nested #ifdef for clarity.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/powerpc/cpu/mpc83xx/cpu.c | 2 +-
arch/powerpc/cpu/mpc83xx/fdt.c | 2 +-
arch/powerpc/cpu/mpc83xx/pcie.c | 4 +-
arch/powerpc/cpu/mpc83xx/speed.c | 81 +++++++++++++++++++-------------
arch/powerpc/include/asm/global_data.h | 73 +++++++++++++---------------
5 files changed, 86 insertions(+), 76 deletions(-)
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index e64b0c3..cc20234 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -122,7 +122,7 @@ int checkcpu(void)
printf(" at %s MHz, ", strmhz(buf, clock));
- printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
+ printf("CSB: %s MHz\n", strmhz(buf, gd->arch.csb_clk));
return 0;
}
diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c
index 1f54781..fe553a7 100644
--- a/arch/powerpc/cpu/mpc83xx/fdt.c
+++ b/arch/powerpc/cpu/mpc83xx/fdt.c
@@ -118,7 +118,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", gd->core_clk, 1);
+ "clock-frequency", gd->arch.core_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c
index 52d4461..609b133 100644
--- a/arch/powerpc/cpu/mpc83xx/pcie.c
+++ b/arch/powerpc/cpu/mpc83xx/pcie.c
@@ -286,8 +286,8 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
get_clocks();
/* Configure the PCIE controller core clock ratio */
out_le32(hose_cfg_base + PEX_GCLK_RATIO,
- (((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
- / 333);
+ (((bus ? gd->arch.pciexp2_clk : gd->arch.pciexp1_clk)
+ / 1000000) * 16) / 333);
udelay(1000000);
/* Do Type 1 bridge configuration */
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index 21e8b0a..7f98ee8 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -462,37 +462,37 @@ int get_clocks(void)
brg_clk = qe_clk / 2;
#endif
- gd->csb_clk = csb_clk;
+ gd->arch.csb_clk = csb_clk;
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
- gd->tsec1_clk = tsec1_clk;
- gd->tsec2_clk = tsec2_clk;
- gd->usbdr_clk = usbdr_clk;
+ gd->arch.tsec1_clk = tsec1_clk;
+ gd->arch.tsec2_clk = tsec2_clk;
+ gd->arch.usbdr_clk = usbdr_clk;
#elif defined(CONFIG_MPC8309)
- gd->usbdr_clk = usbdr_clk;
+ gd->arch.usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834x)
- gd->usbmph_clk = usbmph_clk;
+ gd->arch.usbmph_clk = usbmph_clk;
#endif
#if defined(CONFIG_MPC8315)
- gd->tdm_clk = tdm_clk;
+ gd->arch.tdm_clk = tdm_clk;
#endif
#if defined(CONFIG_FSL_ESDHC)
gd->sdhc_clk = sdhc_clk;
#endif
- gd->core_clk = core_clk;
+ gd->arch.core_clk = core_clk;
gd->i2c1_clk = i2c1_clk;
#if !defined(CONFIG_MPC832x)
gd->i2c2_clk = i2c2_clk;
#endif
#if !defined(CONFIG_MPC8309)
- gd->enc_clk = enc_clk;
+ gd->arch.enc_clk = enc_clk;
#endif
- gd->lbiu_clk = lbiu_clk;
- gd->lclk_clk = lclk_clk;
+ gd->arch.lbiu_clk = lbiu_clk;
+ gd->arch.lclk_clk = lclk_clk;
gd->mem_clk = mem_clk;
#if defined(CONFIG_MPC8360)
- gd->mem_sec_clk = mem_sec_clk;
+ gd->arch.mem_sec_clk = mem_sec_clk;
#endif
#if defined(CONFIG_QE)
gd->qe_clk = qe_clk;
@@ -500,15 +500,15 @@ int get_clocks(void)
#endif
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
- gd->pciexp1_clk = pciexp1_clk;
- gd->pciexp2_clk = pciexp2_clk;
+ gd->arch.pciexp1_clk = pciexp1_clk;
+ gd->arch.pciexp2_clk = pciexp2_clk;
#endif
#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- gd->sata_clk = sata_clk;
+ gd->arch.sata_clk = sata_clk;
#endif
gd->pci_clk = pci_sync_in;
- gd->cpu_clk = gd->core_clk;
- gd->bus_clk = gd->csb_clk;
+ gd->cpu_clk = gd->arch.core_clk;
+ gd->bus_clk = gd->arch.csb_clk;
return 0;
}
@@ -519,7 +519,7 @@ int get_clocks(void)
*********************************************/
ulong get_bus_freq(ulong dummy)
{
- return gd->csb_clk;
+ return gd->arch.csb_clk;
}
/********************************************
@@ -536,50 +536,65 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
char buf[32];
printf("Clock configuration:\n");
- printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
- printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+ printf(" Core: %-4s MHz\n",
+ strmhz(buf, gd->arch.core_clk));
+ printf(" Coherent System Bus: %-4s MHz\n",
+ strmhz(buf, gd->arch.csb_clk));
#if defined(CONFIG_QE)
printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
printf(" BRG: %-4s MHz\n",
strmhz(buf, gd->arch.brg_clk));
#endif
- printf(" Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
- printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->lclk_clk));
+ printf(" Local Bus Controller:%-4s MHz\n",
+ strmhz(buf, gd->arch.lbiu_clk));
+ printf(" Local Bus: %-4s MHz\n",
+ strmhz(buf, gd->arch.lclk_clk));
printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk));
#if defined(CONFIG_MPC8360)
- printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
+ printf(" DDR Secondary: %-4s MHz\n",
+ strmhz(buf, gd->arch.mem_sec_clk));
#endif
#if !defined(CONFIG_MPC8309)
- printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
+ printf(" SEC: %-4s MHz\n",
+ strmhz(buf, gd->arch.enc_clk));
#endif
printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
#if !defined(CONFIG_MPC832x)
printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
#endif
#if defined(CONFIG_MPC8315)
- printf(" TDM: %-4s MHz\n", strmhz(buf, gd->tdm_clk));
+ printf(" TDM: %-4s MHz\n",
+ strmhz(buf, gd->arch.tdm_clk));
#endif
#if defined(CONFIG_FSL_ESDHC)
printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
#endif
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
- printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
- printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
- printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+ printf(" TSEC1: %-4s MHz\n",
+ strmhz(buf, gd->arch.tsec1_clk));
+ printf(" TSEC2: %-4s MHz\n",
+ strmhz(buf, gd->arch.tsec2_clk));
+ printf(" USB DR: %-4s MHz\n",
+ strmhz(buf, gd->arch.usbdr_clk));
#elif defined(CONFIG_MPC8309)
- printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+ printf(" USB DR: %-4s MHz\n",
+ strmhz(buf, gd->arch.usbdr_clk));
#endif
#if defined(CONFIG_MPC834x)
- printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
+ printf(" USB MPH: %-4s MHz\n",
+ strmhz(buf, gd->arch.usbmph_clk));
#endif
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
- printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
- printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
+ printf(" PCIEXP1: %-4s MHz\n",
+ strmhz(buf, gd->arch.pciexp1_clk));
+ printf(" PCIEXP2: %-4s MHz\n",
+ strmhz(buf, gd->arch.pciexp2_clk));
#endif
#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- printf(" SATA: %-4s MHz\n", strmhz(buf, gd->sata_clk));
+ printf(" SATA: %-4s MHz\n",
+ strmhz(buf, gd->arch.sata_clk));
#endif
return 0;
}
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 7d0115d..b7bb035 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -42,64 +42,59 @@ struct arch_global_data {
#if defined(CONFIG_QE)
u32 brg_clk;
#endif
-};
-
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long bus_clk;
- /* We cannot bracket this with CONFIG_PCI due to mpc5xxx */
- unsigned long pci_clk;
-#if defined(CONFIG_CPM2)
- /* There are many clocks on the MPC8260 - see page 9-5 */
- unsigned long vco_out;
- unsigned long cpm_clk;
- unsigned long scc_clk;
-#endif
- unsigned long mem_clk;
+ /* TODO: sjg at chromium.org: Should these be unslgned long? */
#if defined(CONFIG_MPC83xx)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
-#elif defined(CONFIG_MPC8309)
+# elif defined(CONFIG_MPC8309)
u32 usbdr_clk;
-#endif
-#if defined (CONFIG_MPC834x)
+# endif
+# if defined(CONFIG_MPC834x)
u32 usbmph_clk;
-#endif /* CONFIG_MPC834x */
-#if defined(CONFIG_MPC8315)
+# endif /* CONFIG_MPC834x */
+# if defined(CONFIG_MPC8315)
u32 tdm_clk;
-#endif
+# endif
u32 core_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+# endif
+# if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
u32 sata_clk;
+# endif
+# if defined(CONFIG_MPC8360)
+ u32 mem_sec_clk;
+# endif /* CONFIG_MPC8360 */
#endif
-#if defined(CONFIG_MPC8360)
- u32 mem_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
+};
+
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ */
+
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned int baudrate;
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long bus_clk;
+ /* We cannot bracket this with CONFIG_PCI due to mpc5xxx */
+ unsigned long pci_clk;
+ unsigned long mem_clk;
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
--
1.7.7.3
More information about the U-Boot
mailing list