[U-Boot] [PATCH v2] nand: Add torture feature

Scott Wood scottwood at freescale.com
Sat Nov 17 00:54:10 CET 2012


On 11/16/2012 01:20:54 PM, Benoît Thébaudeau wrote:
> +int nand_torture(nand_info_t *nand, loff_t offset)
> +{
> +	u_char patterns[] = {0xa5, 0x5a, 0x00};
> +	struct erase_info instr = {
> +		.mtd = nand,
> +		.addr = offset,
> +		.len = nand->erasesize,
> +	};
> +	size_t retlen;
> +	int err, ret = -1, i, patt_count;
> +	u_char *buf;
> +
> +	if ((offset & (nand->erasesize - 1)) != 0) {
> +		puts("Attempt to torture a block at a non block-aligned  
> "
> +				"offset\n");
> +		return -EINVAL;
> +	}
> +
> +	if (offset + nand->erasesize > nand->size) {
> +		puts("Attempt to torture a block outside the flash  
> area\n");
> +		return -EINVAL;
> +	}

I won't hold up the patch for this, since I think it works out OK due  
to type promotion rules (and in any case there are easier ways for a  
hostile user to do bad things in U-Boot) with nand->size being  
uint64_t, but loff_t is signed.  An explicit cast would be nice.

> +	patt_count = ARRAY_SIZE(patterns);
> +
> +	buf = malloc(nand->erasesize);
> +	if (buf == NULL) {
> +		puts("Out of memory for erase block buffer\n");
> +		return -ENOMEM;
> +	}
> +
> +	for (i = 0; i < patt_count; i++) {
> +		err = nand->erase(nand, &instr);
> +		if (err) {
> +			printf("%s: erase() failed for block at 0x%llx:  
> %d\n",
> +				nand->name, instr.addr, err);
> +			goto out;
> +		}
> +
> +		/* Make sure the block contains only 0xff bytes */
> +		err = nand->read(nand, offset, nand->erasesize,  
> &retlen, buf);
> +		if ((err && err != -EUCLEAN) || retlen !=  
> nand->erasesize) {
> +			printf("%s: read() failed for block at 0x%llx:  
> %d\n",
> +				nand->name, instr.addr, err);
> +			goto out;
> +		}
> +
> +		err = check_pattern(buf, 0xff, nand->erasesize);
> +		if (!err) {
> +			printf("Erased block at 0x%llx, but a non-0xff  
> byte "
> +					"was found\n", offset);
> +			ret = -EIO;
> +			goto out;
> +		}

Strings should not be wrapped (to improve greppability of errors), even  
if it would put the line over 80 columns.  I'll fix this when applying.

> diff --git u-boot-nand-flash-9c60e75.orig/include/nand.h  
> u-boot-nand-flash-9c60e75/include/nand.h
> index bbe28b2..c4530b0 100644
> --- u-boot-nand-flash-9c60e75.orig/include/nand.h
> +++ u-boot-nand-flash-9c60e75/include/nand.h
> @@ -139,6 +139,9 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t  
> offset, size_t *length,
>  int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t  
> *length,
>  			u_char *buffer, int flags);
>  int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t  
> *opts);
> +#ifdef CONFIG_CMD_NAND_TORTURE
> +int nand_torture(nand_info_t *nand, loff_t offset);
> +#endif

Prototypes should not be ifdeffed.  Will fix when applying.

Applied to u-boot-nand-flash.

-Scott


More information about the U-Boot mailing list