[U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5

[Matt Sealey]

Hi Benoit,

Just a FYI the Efika MX products use PATA devices (Sandisk pSSD-P2 or
similar) so it's not a good test. We do have an MX53 board with NAND on the
NFC - but we're sticking with Freescale's BSP U-Boot for the time being on
that particular product. If I can schedule some time for it I will test it.

Matt Sealey <matt at genesi-usa.com>
Product Development Analyst, Genesi USA, Inc.


On Sat, Nov 17, 2012 at 12:37 PM, Fabio Estevam <festevam at gmail.com> wrote:

> On Fri, Nov 16, 2012 at 6:15 PM, Benoît Thébaudeau
> <benoit.thebaudeau at advansee.com> wrote:
>
> > It's hard to find the schematics of all the i.MX5 boards supported by
> mainline
> > U-Boot. According to the links below, at least the Genesi EFIKA MX
> Smartbook and
> > the Freescale MX53 ARD boards have embedded NAND. Matt, Fabio, is it
> possible to
> > find the schematics of these boards somewhere?
>
> Yes, will send you offline.
>
> Regards,
>
> Fabio Estevam
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>