[U-Boot] [PATCH 1/2] OMAP3: fix panel timing on the mt_ventoux board

[Stefano Babic]

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 board/teejet/mt_ventoux/mt_ventoux.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 9622a81..98b92f3 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -73,10 +73,10 @@ static struct {
 
 static struct panel_config lcd_cfg[] = {
 	{
-	.timing_h       = PANEL_TIMING_H(4, 8, 41),
-	.timing_v       = PANEL_TIMING_V(2, 4, 10),
-	.pol_freq       = 0x00000000, /* Pol Freq */
-	.divisor        = 0x0001000d, /* 33Mhz Pixel Clock */
+	.timing_h       = PANEL_TIMING_H(40, 5, 2),
+	.timing_v       = PANEL_TIMING_V(8, 8, 2),
+	.pol_freq       = 0x00003000, /* Pol Freq */
+	.divisor        = 0x00010033, /* 9 Mhz Pixel Clock */
 	.panel_type     = 0x01, /* TFT */
 	.data_lines     = 0x03, /* 24 Bit RGB */
 	.load_mode      = 0x02, /* Frame Mode */
-- 
1.7.9.5