[U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation

[Angelo Dureghello]

Fix coldfire serial driver bindings no more relocated to ram after last
changes to drivers/serial/serial.c (regression).
Serial initialization in ram has to be called after that gd->reloc_off is
calculated.

Signed-off-by: Angelo Dureghello <sysamfw at gmail.com>
Cc: Jason Jin <jason.jin at freescale.com>
---
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 02d73fd..373570c 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)

        gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */

-       serial_initialize();
-
        debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);

        WATCHDOG_RESET ();

        gd->reloc_off =  dest_addr - CONFIG_SYS_MONITOR_BASE;

+	serial_initialize();
+
        monitor_flash_len = (ulong)&__init_end - dest_addr;

 #if defined(CONFIG_NEEDS_MANUAL_RELOC)