[U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Sat Nov 24 16:29:03 CET 2012
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 34275d70fec6cc369a931090ebb686bc213bb80d:
arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 1d4fd0dc3b45de7b7a706285845ef5b527422014:
mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET (2012-11-24 16:21:37
+0100)
----------------------------------------------------------------
Benoît Thébaudeau (16):
mx31: Move EHCI definitions to ehci-fsl.h
ehci-mxc: Clean up
ehci-mx5: Clean up
ehci-mx5: Fix OC_DIS usage
ehci-mx5: Fix OPM usage
ehci-mx5: Fix *PM usage for i.MX53
ehci-mx5: Add missing OC_DIS for i.MX53
ehci-mxc: Make EHCI power/oc polarities configurable
ehci-mxc: Make i.MX25 EHCI configurable
ehci-mxc: Define host offsets
ehci-mxc: Add support for i.MX35
mx35pdk: Add support for OTG
ehci-mx5/6: Make board_ehci_hcd_init() optional
ehci-mxc: Fix host power mask bit for i.MX35
ehci-mxc: Fix host power mask bit for i.MX25
mx5: Mark lowlevel_init board-specific code
Fabio Estevam (13):
mx5: Align SPI CS naming with i.MX53 reference manual
mx5: Print CSPI clock in 'clock' command
spi: mxc_spi: Fix handling of chip select
spi: mxc_spi: Fix spi clock glitch durant reset
mx6: clock: Only show CSPI clock if CSPI is enabled
mx28evk: Configure CONFIG_BOOTDELAY to one second
mx53loco: Configure CONFIG_BOOTDELAY to one second
mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
mx51evk: Configure CONFIG_BOOTDELAY to one second
mx25pdk: Configure CONFIG_BOOTDELAY to one second
mx31pdk: Configure CONFIG_BOOTDELAY to one second
mx35pdk: Configure CONFIG_BOOTDELAY to one second
Marek Vasut (2):
mx28: Fix typo in POWER_MINPWR_VBG_OFF
mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
arch/arm/cpu/armv7/mx5/clock.c | 4 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 2 +-
arch/arm/cpu/armv7/mx6/clock.c | 2 +
arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +---
arch/arm/include/asm/arch-mx35/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 6 +-
arch/arm/include/asm/arch-mxs/regs-power.h | 4 +-
board/freescale/mx35pdk/lowlevel_init.S | 4 +
board/freescale/mx35pdk/mx35pdk.c | 21 +++
doc/README.imx5 | 5 +
drivers/spi/mxc_spi.c | 9 +-
drivers/usb/host/ehci-mx5.c | 146 ++++++++++++++----
drivers/usb/host/ehci-mx6.c | 5 +
drivers/usb/host/ehci-mxc.c | 225
+++++++++++++++++++++-------
include/configs/mx25pdk.h | 2 +-
include/configs/mx28evk.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx35pdk.h | 16 +-
include/configs/mx51_efikamx.h | 1 +
include/configs/mx51evk.h | 3 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx6qsabre_common.h | 2 +-
include/configs/mx6qsabrelite.h | 2 +-
include/configs/vision2.h | 1 +
include/configs/zmx25.h | 6 +-
include/usb/ehci-fsl.h | 28 +++-
27 files changed, 401 insertions(+), 129 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list