[U-Boot] [PATCH v5 3/3] ARM: lacie_kw: add support for WIRELESS_SPACE
Albert ARIBAUD
albert.u.boot at aribaud.net
Mon Nov 26 22:27:37 CET 2012
Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
Changes in v5:
- made fan, usb, HDD powered on at boot
- fixed NAND env and Ethernet configs
- general "ws" command with support for buttons
- made netconsole accessible before boot delay
Changes in v4:
- switched from netspace_V2-based to standalone board
- added support for mv88e61xx switch
- corrected some kwbimage.cfg values
Changes in v3:
- fix broken support for NETSPACE_(MINI|LITE)_V2
Changes in v2:
- split the patch in two: mvgbe phy/port changes and WS support.
- removed spurious DEBUG define
- fixed various checkpatch errors/warnings/typos
board/LaCie/wireless_space/Makefile | 46 +++++++
board/LaCie/wireless_space/kwbimage.cfg | 82 +++++++++++
board/LaCie/wireless_space/wireless_space.c | 176 ++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/wireless_space.h | 194 +++++++++++++++++++++++++++
5 files changed, 499 insertions(+)
create mode 100644 board/LaCie/wireless_space/Makefile
create mode 100644 board/LaCie/wireless_space/kwbimage.cfg
create mode 100644 board/LaCie/wireless_space/wireless_space.c
create mode 100644 include/configs/wireless_space.h
diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile
new file mode 100644
index 0000000..b43c3d3
--- /dev/null
+++ b/board/LaCie/wireless_space/Makefile
@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := $(BOARD).o ../common/common.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg
new file mode 100644
index 0000000..0daf5b5
--- /dev/null
+++ b/board/LaCie/wireless_space/kwbimage.cfg
@@ -0,0 +1,82 @@
+#
+# Copyright (C) 2012 Albert ARIBAUD <albert.u.boot at aribaud.net>
+#
+# Based on netspace_v2 kwbimage.cfg:
+# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand # Boot from NAND flash
+NAND_PAGE_SIZE 800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Values taken from image original LaCie U-Boot header dump!
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1B1B1B9B
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xFFD01400 0x43000c30 # DDR Configuration register
+
+DATA 0xFFD01404 0x37743000 # DDR Controller Control Low
+
+DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1)
+
+DATA 0xFFD0140C 0x00000A19 # DDR Timing (High)
+
+DATA 0xFFD01410 0x0000CCCC # DDR Address Control
+
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
+
+DATA 0xFFD01418 0x00000000 # DDR Operation
+
+DATA 0xFFD0141C 0x00000662 # DDR Mode
+
+DATA 0xFFD01420 0x00000004 # DDR Extended Mode
+
+DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
+
+DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values)
+
+DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
+DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low)
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
+DATA 0xFFD0149C 0x0000E40F # CPU ODT Control
+DATA 0xFFD01480 0x00000001 # DDR Initialization Control
+DATA 0xFFD20134 0x66666666
+DATA 0xFFD20138 0x66666666
+DATA 0xFFD10000 0x01112222
+DATA 0xFFD1000C 0x00000000
+DATA 0xFFD10104 0x00000000
+DATA 0xFFD10100 0x40000000
+# End of Header extension
+DATA 0x0 0x0
diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c
new file mode 100644
index 0000000..2080658
--- /dev/null
+++ b/board/LaCie/wireless_space/wireless_space.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/gpio.h>
+
+#include "../common/common.h"
+#include "netdev.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* GPIO configuration: start FAN at low speed, USB and HDD */
+
+#define WIRELESS_SPACE_OE_LOW 0xFF006808
+#define WIRELESS_SPACE_OE_HIGH 0x0000F989
+#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080
+#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240
+
+#define WIRELESS_SPACE_REAR_BUTTON 13
+#define WIRELESS_SPACE_FRONT_BUTTON 43
+
+const u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* Fan speed (bit 1) */
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_GPIO, /* Red led */
+ MPP14_GPIO, /* USB fuse */
+ MPP15_SATA0_ACTn,
+ MPP16_GPIO, /* SATA 0 power */
+ MPP17_GPIO, /* SATA 1 power */
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GE1_0, /* Gigabit Ethernet 1 */
+ MPP21_GE1_1,
+ MPP22_GE1_2,
+ MPP23_GE1_3,
+ MPP24_GE1_4,
+ MPP25_GE1_5,
+ MPP26_GE1_6,
+ MPP27_GE1_7,
+ MPP28_GE1_8,
+ MPP29_GE1_9,
+ MPP30_GE1_10,
+ MPP31_GE1_11,
+ MPP32_GE1_12,
+ MPP33_GE1_13,
+ MPP34_GE1_14,
+ MPP35_GE1_15,
+ MPP36_GPIO, /* Fan speed (bit 2) */
+ MPP37_GPIO, /* Fan speed (bit 0) */
+ MPP38_GPIO, /* Fan power */
+ MPP39_GPIO, /* Fan rotation fail */
+ MPP40_GPIO, /* Ethernet switch link */
+ MPP41_GPIO, /* USB enable host vbus */
+ MPP42_GPIO, /* LED clock control */
+ MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */
+ MPP44_GPIO, /* Red LED on/off */
+ MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */
+ MPP46_GPIO, /* Green LED on/off */
+ MPP47_GPIO, /* LED (blue, green) SATA activity blink */
+ MPP48_GPIO, /* Blue LED on/off */
+ 0
+};
+
+struct mv88e61xx_config swcfg = {
+ .name = "egiga0",
+ .vlancfg = MV88E61XX_VLANCFG_ROUTER,
+ .rgmii_delay = MV88E61XX_RGMII_DELAY_EN,
+ .led_init = MV88E61XX_LED_INIT_EN,
+ .mdip = MV88E61XX_MDIP_NOCHANGE,
+ .portstate = MV88E61XX_PORTSTT_FORWARDING,
+ .cpuport = 0x20,
+ .ports_enabled = 0x3F,
+};
+
+int board_early_init_f(void)
+{
+ /* Gpio configuration */
+ kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
+ WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ kirkwood_mpp_conf(kwmpp_config, NULL);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Machine number */
+ gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+
+ /* Boot parameters address */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+#if defined(CONFIG_MISC_INIT_R)
+int misc_init_r(void)
+{
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
+ if (!getenv("ethaddr")) {
+ uchar mac[6];
+ if (lacie_read_mac_address(mac) == 0)
+ eth_setenv_enetaddr("ethaddr", mac);
+ }
+#endif
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+ /* configure switch on egiga0 */
+ mv88e61xx_switch_initialize(&swcfg);
+}
+#endif
+
+#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD)
+/* Return GPIO button status */
+static int
+do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (strcmp(argv[1], "button") == 0) {
+ if (strcmp(argv[2], "rear") == 0)
+ /* invert GPIO result for intuitive while/until use */
+ return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON);
+ else if (strcmp(argv[2], "front") == 0)
+ return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON);
+ else
+ return -1;
+ } else {
+ return -1;
+ }
+}
+
+U_BOOT_CMD(ws, 3, 0, do_ws,
+ "Return GPIO button status 0=off 1=on",
+ "- ws button rear|front: test buttons' states\n"
+);
+#endif
diff --git a/boards.cfg b/boards.cfg
index 6f21af0..18e42a1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -170,6 +170,7 @@ netspace_lite_v2 arm arm926ejs netspace_v2 LaCie
netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2
netspace_mini_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MINI_V2
netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2
+wireless_space arm arm926ejs wireless_space LaCie kirkwood
dreamplug arm arm926ejs - Marvell kirkwood
guruplug arm arm926ejs - Marvell kirkwood
mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h
new file mode 100644
index 0000000..eb20492
--- /dev/null
+++ b/include/configs/wireless_space.h
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot at aribaud.net>
+ *
+ * Based on the netspace_v2 code which is
+ * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CONFIG_WIRELESS_SPACE_H
+#define _CONFIG_WIRELESS_SPACE_H
+
+/*
+ * Machine number definition
+ */
+#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */
+#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
+#define CONFIG_IDENT_STRING " Wireless Space"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD /* SoC Family Name */
+/* SoC name */
+#define CONFIG_KW88F6281
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_USB
+
+/*
+ * Core clock definition
+ */
+#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
+
+/*
+ * SDRAM configuration
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+/*
+ * Different SDRAM configuration and size for some of the boards derived
+ * from the Network Space v2
+ */
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* Remove or override few declarations from mv-common.h */
+#undef CONFIG_RBTREE
+#undef CONFIG_SYS_IDE_MAXBUS
+#undef CONFIG_SYS_IDE_MAXDEVICE
+#define CONFIG_SYS_IDE_MAXBUS 1
+#define CONFIG_SYS_IDE_MAXDEVICE 1
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "ws> "
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */
+#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
+#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */
+#define CONFIG_MII
+#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_NETCONSOLE
+#define CONFIG_MV88E61XX_SWITCH
+#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
+#define CONFIG_MV88E61XX_CMD
+#define CONFIG_CMD_TFTPPUT
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif /* CONFIG_MVSATA_IDE */
+
+/*
+ * Enable GPI0 support
+ */
+#define CONFIG_KIRKWOOD_GPIO
+
+/*
+ * Enable I2C support
+ */
+#ifdef CONFIG_CMD_I2C
+/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
+#endif /* CONFIG_CMD_I2C */
+
+/*
+ * Partition support
+ */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/*
+ * File systems support
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Console configuration
+ */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
+ * Environment variables configurations
+ */
+
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
+#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
+#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
+
+/*
+ * Board-specific command to make using buttons etc easier
+ */
+
+#define CONFIG_WIRELESS_SPACE_CMD
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_PREBOOT
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200"
+
+#define CONFIG_BOOTCOMMAND \
+ "if run usbload || run diskload; then bootm; fi"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0" \
+ "bootfile=uImage\0" \
+ "loadaddr=0x800000\0" \
+ "autoload=no\0" \
+ "netconsole=" \
+ "set stdin $stdin,nc; " \
+ "set stdout $stdout,nc; " \
+ "set stderr $stderr,nc;\0" \
+ "diskload=ide reset && " \
+ "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
+ "usbload=usb start && " \
+ "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \
+ "preboot=" \
+ "dhcp && run netconsole\0"
+
+#endif /* _CONFIG_WIRELESS_SPACE_H */
--
1.7.10.4
More information about the U-Boot
mailing list