[U-Boot] [PATCH v5 00/11] S3C24XX: Add support to MINI2416 board

José Miguel Gonçalves jose.goncalves at inov.pt
Tue Nov 27 15:56:03 CET 2012


Hi,

Can you tell me if this patch series is going to be included on next u-boot release?
Do you need anything from my side in order to push this?

Best regards,
José Gonçalves

On 21-09-2012 19:47, José Miguel Gonçalves wrote:
> Support for the MINI2416 board based on a Samsung's S3C2416 SoC with
> 64MB DDR2 SDRAM, 256MB NAND Flash, a LAN9220 Ethernet Controller and a
> WM8731 Audio CODEC.
>
> Changes for v2:
>     - Coding style cleanup
>     - Removed new serial and rtc drivers
>     - Use of in-tree serial and rtc drivers
>
> Changes for v3:
>     - Rebased on new SPL framework:
>       http://github.com/trini/u-boot WIP/spl-improvements
>     - Removed patch "ARM: fix relocation on ARM926EJS"
>     - Add patch to configure printf() inclusion on SPL
>     - Changed new binary target name from u-boot-ubl.bin to u-boot-pad.bin
>     - Removed magic numbers
>     - Checkpatch clean except:
>       - False positive:
> 	ERROR: spaces required around that ':' (ctx:VxV)
> 	#692: FILE: include/configs/mini2416.h:165:
> 	+#define CONFIG_ETHADDR			FE:11:22:33:44:55
>       - Following preexistent coding style:
> 	WARNING: please, no spaces at the start of a line
> 	#1716: FILE: include/common.h:631:
> 	+    defined(CONFIG_S3C24XX) || \$
>
> Changes for v4:
>     - NAND Flash driver cleanup and optimization
>
> Changes for v5:
>     - Changed image filename for SPL + u-boot
>     - Minor change in the NAND Flash driver
>     - Coding style cleanup
>     - Removal of #define CONFIG_SYS_BAUDRATE_TABLE as this in the defaults now
>     - Checkpatch clean with the exceptions indicated in the v3 changes
>
> José Miguel Gonçalves (11):
>    Add configuration option to select printf() inclusion on SPL
>    S3C24XX: Add core support for Samsung's S3C24XX SoCs
>    serial: Add support to 4 ports in serial_s3c24x0
>    serial: Use a more precise baud rate generation for serial_s3c24x0
>    serial: Remove unnecessary delay in serial_s3c24x0
>    rtc: Improve rtc_get() on s3c24x0_rtc
>    rtc: Fix rtc_reset() on s3c24x0_rtc
>    rtc: Don't allow setting unsuported years on s3c24x0_rtc
>    S3C24XX: Add NAND Flash driver
>    Add u-boot-with-spl.bin target to the Makefile
>    S3C24XX: Add support to MINI2416 board
>
>   MAINTAINERS                                     |    4 +
>   Makefile                                        |   11 +-
>   README                                          |    3 +
>   arch/arm/cpu/arm926ejs/s3c24xx/Makefile         |   56 +++
>   arch/arm/cpu/arm926ejs/s3c24xx/cpu.c            |   57 +++
>   arch/arm/cpu/arm926ejs/s3c24xx/cpu_info.c       |   57 +++
>   arch/arm/cpu/arm926ejs/s3c24xx/s3c2412_speed.c  |  114 +++++
>   arch/arm/cpu/arm926ejs/s3c24xx/s3c2416_speed.c  |  116 +++++
>   arch/arm/cpu/arm926ejs/s3c24xx/timer.c          |  152 ++++++
>   arch/arm/include/asm/arch-s3c24xx/s3c2412.h     |  130 +++++
>   arch/arm/include/asm/arch-s3c24xx/s3c2416.h     |  183 +++++++
>   arch/arm/include/asm/arch-s3c24xx/s3c24x0_cpu.h |   41 ++
>   arch/arm/include/asm/arch-s3c24xx/s3c24xx.h     |  615 +++++++++++++++++++++++
>   arch/arm/include/asm/arch-s3c24xx/s3c24xx_cpu.h |   30 ++
>   arch/arm/include/asm/arch-s3c24xx/spl.h         |   29 ++
>   board/boardcon/mini2416/Makefile                |   47 ++
>   board/boardcon/mini2416/config.mk               |    4 +
>   board/boardcon/mini2416/mini2416.c              |  104 ++++
>   board/boardcon/mini2416/mini2416_spl.c          |  202 ++++++++
>   board/boardcon/mini2416/u-boot-spl.lds          |   63 +++
>   boards.cfg                                      |    1 +
>   drivers/mtd/nand/Makefile                       |    1 +
>   drivers/mtd/nand/s3c24xx_nand.c                 |  255 ++++++++++
>   drivers/rtc/s3c24x0_rtc.c                       |   30 +-
>   drivers/serial/serial_s3c24x0.c                 |   52 +-
>   include/common.h                                |   12 +
>   include/configs/VCMA9.h                         |    2 +-
>   include/configs/mini2416.h                      |  202 ++++++++
>   include/configs/smdk2410.h                      |    2 +-
>   spl/Makefile                                    |    4 +-
>   30 files changed, 2550 insertions(+), 29 deletions(-)
>   create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/Makefile
>   create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/cpu.c
>   create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/cpu_info.c
>   create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/s3c2412_speed.c
>   create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/s3c2416_speed.c
>   create mode 100644 arch/arm/cpu/arm926ejs/s3c24xx/timer.c
>   create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c2412.h
>   create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c2416.h
>   create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c24x0_cpu.h
>   create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c24xx.h
>   create mode 100644 arch/arm/include/asm/arch-s3c24xx/s3c24xx_cpu.h
>   create mode 100644 arch/arm/include/asm/arch-s3c24xx/spl.h
>   create mode 100644 board/boardcon/mini2416/Makefile
>   create mode 100644 board/boardcon/mini2416/config.mk
>   create mode 100644 board/boardcon/mini2416/mini2416.c
>   create mode 100644 board/boardcon/mini2416/mini2416_spl.c
>   create mode 100644 board/boardcon/mini2416/u-boot-spl.lds
>   create mode 100644 drivers/mtd/nand/s3c24xx_nand.c
>   create mode 100644 include/configs/mini2416.h
>




More information about the U-Boot mailing list