[U-Boot] [PATCH 3/5] Add fuse API and commands

[Eric Nelson]

On 11/27/2012 12:23 PM, Benoît Thébaudeau wrote:
> Hi Eric,
>
> On Tuesday, November 27, 2012 7:36:41 PM, Eric Nelson wrote:
>> Hi Benoît,
>>
>> On 11/27/2012 11:27 AM, Benoît Thébaudeau wrote:
>>> Hi Eric, Dirk,
>>>
>>>> and some per-arch documentation about how to translate
>>>> between the reference manual and the command.
>>>
>>> Yes. Should this documentation be located in the README.fuse, or in
>>> separate
>>> README files, or in the drivers themselves, e.g. fsl_iim.c?
>>>
>>
>> I think doc/readme.imx* is the right place.
>
> MPC/i.MX25/35/51/53 would have the same documentation here since they all use
> the IIM. On the other side, there would be the i.MX6 with the OCOTP. So this
> part of the documentation is rather IP-specific than SoC- or platform-specific.
> Hence, I think that the right place would be either README.fuse, or
> README.fsl_iim/README.fsl_ocotp[/...], or fsl_iim.c/fsl_ocotp.c[/...].
>

Sounds good to me.