[U-Boot] [PATCH 2/2 v2] tegra: enable LCD on PAZ00

Tom Warren twarren.nvidia at gmail.com
Wed Nov 28 18:58:02 CET 2012


Thanks, Marc.

This series applied to u-boot-tegra/next.

Tom

On Tue, Nov 27, 2012 at 9:55 AM, Marc Dietrich <marvin24 at gmx.de> wrote:
> This adds LCD panel descriptions to the device tree of PAZ00 and
> enables LCD support in the configuration.
>
> Signed-off-by: Marc Dietrich <marvin24 at gmx.de>
> ---
> I'll create a patch to add LCD support to common TEGRA_DEVICE_SETTINGS
> once the tegra tree is rebased.
>
> changes in V2:
>         - s/DISPALY/DISPLAY/
>         - removed W0 gpio which is not used
>         - set all panel-timings to 0
>
>  board/compal/dts/tegra20-paz00.dts |   31 +++++++++++++++++++++++++++++++
>  board/compal/paz00/paz00.c         |   11 +++++++++++
>  include/configs/paz00.h            |   15 +++++++++++++++
>  3 files changed, 57 insertions(+)
>
> diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts
> index 9e3e169..8c258ff 100644
> --- a/board/compal/dts/tegra20-paz00.dts
> +++ b/board/compal/dts/tegra20-paz00.dts
> @@ -54,4 +54,35 @@
>         usb at c5004000 {
>                 status = "disabled";
>         };
> +
> +       host1x {
> +               status = "okay";
> +               dc at 54200000 {
> +                       status = "okay";
> +                       rgb {
> +                               status = "okay";
> +                               nvidia,panel = <&lcd_panel>;
> +                       };
> +               };
> +       };
> +
> +       lcd_panel: panel {
> +               /* PAZ00 has 1024x600 */
> +               clock = <54030000>;
> +               xres = <1024>;
> +               yres = <600>;
> +               right-margin = <160>;
> +               left-margin = <24>;
> +               hsync-len = <136>;
> +               upper-margin = <3>;
> +               lower-margin = <61>;
> +               vsync-len = <6>;
> +               hsync-active-high;
> +               nvidia,bits-per-pixel = <16>;
> +               nvidia,pwm = <&pwm 0 0>;
> +               nvidia,backlight-enable-gpios = <&gpio 164 0>;  /* PU4 */
> +               nvidia,lvds-shutdown-gpios = <&gpio 102 0>;     /* PM6 */
> +               nvidia,panel-vdd-gpios = <&gpio 4 0>;           /* PA4 */
> +               nvidia,panel-timings = <0 0 0 0>;
> +       };
>  };
> diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
> index 6492d41..1447f47 100644
> --- a/board/compal/paz00/paz00.c
> +++ b/board/compal/paz00/paz00.c
> @@ -71,3 +71,14 @@ int board_mmc_init(bd_t *bd)
>         return 0;
>  }
>  #endif
> +
> +#ifdef CONFIG_LCD
> +/* this is a weak define that we are overriding */
> +void pin_mux_display(void)
> +{
> +       debug("init display pinmux\n");
> +
> +       /* EN_VDD_PANEL GPIO A4 */
> +       pinmux_tristate_disable(PINGRP_DAP2);
> +}
> +#endif
> diff --git a/include/configs/paz00.h b/include/configs/paz00.h
> index 38c79cf..4a74d00 100644
> --- a/include/configs/paz00.h
> +++ b/include/configs/paz00.h
> @@ -36,6 +36,7 @@
>  #define CONFIG_MACH_TYPE               MACH_TYPE_PAZ00
>
>  #define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_BOARD_LATE_INIT
>
>  /* SD/MMC */
>  #define CONFIG_MMC
> @@ -71,6 +72,20 @@
>  #define CONFIG_CMD_NET
>  #define CONFIG_CMD_DHCP
>
> +#undef TEGRA_DEVICE_SETTINGS
> +#define TEGRA_DEVICE_SETTINGS  \
> +       "stdin=serial\0"        \
> +       "stdout=serial,lcd\0"   \
> +       "stderr=serial,lcd\0"
> +
> +/* LCD support */
> +#define CONFIG_LCD
> +#define CONFIG_PWM_TEGRA
> +#define CONFIG_VIDEO_TEGRA
> +#define LCD_BPP                                LCD_COLOR16
> +#define CONFIG_SYS_WHITE_ON_BLACK
> +#define CONFIG_CONSOLE_SCROLL_LINES    10
> +
>  #include "tegra-common-post.h"
>
>  #endif /* __CONFIG_H */
> --
> 1.7.9.5
>


More information about the U-Boot mailing list