[U-Boot] [PATCH 2/2] ARM: ns9750dev: remove remainders of dead board
Wolfgang Denk
wd at denx.de
Thu Nov 29 13:53:29 CET 2012
Commit 8b710b1 started removing code for the unmaintained "ns9750dev"
board; the board support is still broken, and not included anywhere in
the Makefile or boards.cfg. Remove the remaining dead code.
Signed-off-by: Wolfgang Denk <wd at denx.de>
---
board/ns9750dev/Makefile | 45 ----
board/ns9750dev/config.mk | 16 --
board/ns9750dev/flash.c | 474 ----------------------------------------
board/ns9750dev/led.c | 46 ----
board/ns9750dev/lowlevel_init.S | 298 -------------------------
board/ns9750dev/ns9750dev.c | 125 -----------
doc/README.ns9750dev | 36 ---
doc/README.scrapyard | 1 +
doc/driver-model/UDM-serial.txt | 2 +-
drivers/serial/Makefile | 1 -
drivers/serial/ns9750_serial.c | 218 ------------------
drivers/serial/serial.c | 2 -
include/configs/ns9750dev.h | 187 ----------------
include/ns9750_bbus.h | 125 -----------
include/ns9750_mem.h | 172 ---------------
include/ns9750_ser.h | 202 -----------------
include/ns9750_sys.h | 215 ------------------
17 files changed, 2 insertions(+), 2163 deletions(-)
delete mode 100644 board/ns9750dev/Makefile
delete mode 100644 board/ns9750dev/config.mk
delete mode 100644 board/ns9750dev/flash.c
delete mode 100644 board/ns9750dev/led.c
delete mode 100644 board/ns9750dev/lowlevel_init.S
delete mode 100644 board/ns9750dev/ns9750dev.c
delete mode 100644 doc/README.ns9750dev
delete mode 100644 drivers/serial/ns9750_serial.c
delete mode 100644 include/configs/ns9750dev.h
delete mode 100644 include/ns9750_bbus.h
delete mode 100644 include/ns9750_mem.h
delete mode 100644 include/ns9750_ser.h
delete mode 100644 include/ns9750_sys.h
diff --git a/board/ns9750dev/Makefile b/board/ns9750dev/Makefile
deleted file mode 100644
index 0d082c5..0000000
--- a/board/ns9750dev/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := ns9750dev.o flash.o led.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ns9750dev/config.mk b/board/ns9750dev/config.mk
deleted file mode 100644
index e5d8702..0000000
--- a/board/ns9750dev/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#######################################################################
-#
-# Copyright (C) 2004 by FS Forth-Systeme GmbH.
-# Markus Pietrek <mpietrek at fsforth.de>
-#
-# @TODO
-# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000
-# optionally with a ramdisk at 0080'0000
-#
-# we load ourself to 0078'0000
-#
-# download area is 0060'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x00780000
diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c
deleted file mode 100644
index 185bc2d..0000000
--- a/board/ns9750dev/flash.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij at ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef {
- unsigned int sector_number;
- unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgIntel_28F256L18T[] = {
- {4, 32 * 1024}, /* 4 * 32kBytes sectors */
- {255, 128 * 1024}, /* 255 * 128kBytes sectors */
-};
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-unsigned long flash_init (void);
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-void flash_print_info (flash_info_t * info);
-void flash_unprotect_sectors (FPWV * addr);
-int flash_erase (flash_info_t * info, int s_first, int s_last);
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
- OrgDef *pOrgDef;
-
- pOrgDef = OrgIntel_28F256L18T;
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- if (i > 255) {
- info->start[i] = base + (i * 0x8000);
- info->protect[i] = 0;
- } else {
- info->start[i] = base +
- (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F256L18T:
- printf ("FLASH 28F256L18T\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
- volatile FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[1]; /* device ID */
- switch (value) {
-
- case (FPW) (INTEL_ID_28F256L18T):
- info->flash_id += FLASH_28F256L18T;
- info->sector_count = 259;
- info->size = 0x02000000;
- break; /* => 32 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/* unprotects a sector for write and erase
- * on some intel parts, this unprotects the entire chip, but it
- * wont hurt to call this additional times per sector...
- */
-void flash_unprotect_sectors (FPWV * addr)
-{
-#define PD_FINTEL_WSMS_READY_MASK 0x0080
-
- *addr = (FPW) 0x00500050; /* clear status register */
-
- /* this sends the clear lock bit command */
- *addr = (FPW) 0x00600060;
- *addr = (FPW) 0x00D000D0;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- flash_unprotect_sectors (addr);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- *addr = (FPW) 0x00500050;/* clear status register */
- *addr = (FPW) 0x00200020;/* erase setup */
- *addr = (FPW) 0x00D000D0;/* erase confirm */
-
- while (((status =
- *addr) & (FPW) 0x00800080) !=
- (FPW) 0x00800080) {
- if (get_timer(start) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- /* reset to read mode */
- *addr = (FPW) 0x00FF00FF;
- rcode = 1;
- break;
- }
- }
-
- /* clear status register cmd. */
- *addr = (FPW) 0x00500050;
- *addr = (FPW) 0x00FF00FF;/* resest to read mode */
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- int flag;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
- }
- flash_unprotect_sectors (addr);
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/ns9750dev/led.c b/board/ns9750dev/led.c
deleted file mode 100644
index b85c869..0000000
--- a/board/ns9750dev/led.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: led.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Defines helper functions for toggeling LEDs
- * @Usage:
- * @References: [1]
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifdef CONFIG_STATUS_LED
-
-#include <ns9750_bbus.h>
-
-static inline void __led_init( led_id_t mask, int state )
-{
- XXXX;
-}
-
-static inline void __led_toggle( led_id_t mask )
-{
-}
-
-static inline void __led_set( led_id_t mask, int state )
-{
-}
-
-#endif /* CONFIG_STATUS_LED */
diff --git a/board/ns9750dev/lowlevel_init.S b/board/ns9750dev/lowlevel_init.S
deleted file mode 100644
index ba5ff81..0000000
--- a/board/ns9750dev/lowlevel_init.S
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij at ti.com>
- *
- * Modified for the NS9750 DevBoard by
- * (C) Copyright 2004 by FS Forth-Systeme GmbH.
- * Markus Pietrek <mpietrek at fsforth.de>
- * @References: [1] NS9750 Hardware Reference/December 2003
- * [2] ns9750_a.cmd from MAJIC configuration
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_NS9750DEV)
-# ifndef CONFIG_SKIP_LOWLEVEL_INIT
-# include <./ns9750_sys.h>
-# include <./ns9750_mem.h>
-# endif
-#endif
-
-/***********************************************************************
- * @Function: write_register_block
- * @Return: nothing
- * @Descr: Copies the register block of register_offset:register value to
- * the registers at base r0. The block is assumed to start in RAM at r1
- * and end at r2. The linked RAM base address of U-Boot is assumed to be
- * in r5 while the ROM base address we are running from is r6
- * Uses r3 and r4 as tempory registers
- ***********************************************************************/
-
-.macro write_register_block
- @@ map the addresses to high memory
- sub r1, r1, r5
- add r1, r1, r6
- sub r2, r2, r5
- add r2, r2, r6
-
- @@ copy all
-1:
- @@ Write register/value pair starting at [r1] to register base r0
- ldr r3, [r1], #4
- ldr r4, [r1], #4
- str r4, [r0,r3]
- cmp r1, r2
- blt 1b
-.endm
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config.mk
-_PHYS_FLASH:
- .word PHYS_FLASH_1 @ real flash address (without mirroring)
-_CAS_LATENCY:
- .word 0x00022000 @ for CAS2 latency
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-.globl lowlevel_init
-lowlevel_init:
-
- /* U-Boot may be linked to RAM at 0x780000. But this code will run in
- flash from 0x0. But in order to enable RAM we have to disable the
- mirror bit, therefore we have to jump to our real flash address
- beginning at PHYS_FLASH_1 (CS4 Base). Therefore,
- _run_at_real_flash_address may be 0x500003b0 while be linked to
- 0x7803b0. So we must modify our linked addresses */
-
- @@ branch to high memory address, away from 0x0
- ldr r5, _TEXT_BASE
- ldr r6, _PHYS_FLASH
- ldr r0, =_run_at_real_flash_address
- sub r0, r0, r5
- add r0, r0, r6
- mov pc, r0
- nop @ for pipelining
-
-_run_at_real_flash_address:
- @@ now we are running > PHYS_FLASH_1, safe to enable memory controller
-
- @@ Write Memory Configuration Registers
-
- ldr r0, _NS9750_MEM_MODULE_BASE
- ldr r1, =_MEM_CONFIG_START
- ldr r2, =_MEM_CONFIG_END
-
- write_register_block
-
- @@ Give SDRAM some time to settle
- @@ @TODO. According to [2] it should be 2 AHB cycles. Check
-
- ldr r1, =0x50
-_sdram_settle:
- subs r1, r1, #1
- bne _sdram_settle
-
-_enable_mappings:
- @@ Enable SDRAM Mode
-
- ldr r1, =_MEM_MODE_START
- ldr r2, =_MEM_MODE_END
-
- write_register_block
-
- ldr r3, _CAS_LATENCY @ perform one read from SDRAM
- ldr r3, [r3]
-
- @@ Enable SDRAM and memory mappings
-
- ldr r1, =_MEM_ENABLE_START
- ldr r2, =_MEM_ENABLE_END
-
- write_register_block
-
- @@ Activate AHB monitor
-
- ldr r0, =NS9750_SYS_MODULE_BASE
- ldr r1, =_AHB_MONITOR_START
- ldr r2, =_AHB_MONITOR_END
-
- write_register_block
-_relocate_lr:
- /* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to
- PHYS_FLASH. */
- mov r1, ip
- add r1, r1, r6
- mov ip, r1
-
- mov r1, lr
- add r1, r1, r6
- mov lr, r1
-
- @@ back to arch calling code
- mov pc, lr
-
- .ltorg
-
-_NS9750_MEM_MODULE_BASE:
- .word NS9750_MEM_MODULE_BASE
-
-_MEM_CONFIG_START:
- /* Table of 2 32bit entries. First word is register address offset
- relative to NS9750_MEM_MODULE_BASE, second one is value. They are
- written in order of appearance */
-
- @@ Register values taken from [2]
- .word NS9750_MEM_CTRL
- .word NS9750_MEM_CTRL_E
-
- .word NS9750_MEM_DYN_REFRESH
- .word (0x6 & NS9750_MEM_DYN_REFRESH_MA)
-
- .word NS9750_MEM_DYN_READ_CFG
- .word (0x1 & NS9750_MEM_DYN_READ_CFG_MA)
-
- .word NS9750_MEM_DYN_TRP
- .word (0x1 & NS9750_MEM_DYN_TRP_MA)
-
- .word NS9750_MEM_DYN_TRAS
- .word (0x4 & NS9750_MEM_DYN_TRAS_MA)
-
- .word NS9750_MEM_DYN_TAPR
- .word (0x1 & NS9750_MEM_DYN_TRAS_MA)
-
- .word NS9750_MEM_DYN_TDAL
- .word (0x5 & NS9750_MEM_DYN_TDAL_MA)
-
- .word NS9750_MEM_DYN_TWR
- .word (0x1 & NS9750_MEM_DYN_TWR_MA)
-
- .word NS9750_MEM_DYN_TRC
- .word (0x6 & NS9750_MEM_DYN_TRC_MA)
-
- .word NS9750_MEM_DYN_TRFC
- .word (0x6 & NS9750_MEM_DYN_TRFC_MA)
-
- .word NS9750_MEM_DYN_TRRD
- .word (0x1 & NS9750_MEM_DYN_TRRD_MA)
-
- .word NS9750_MEM_DYN_TMRD
- .word (0x1 & NS9750_MEM_DYN_TMRD_MA)
-
- @@ CS 4
- .word NS9750_MEM_DYN_CFG(0)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(0)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- @@ CS 5
- .word NS9750_MEM_DYN_CFG(1)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(1)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- @@ CS 6
- .word NS9750_MEM_DYN_CFG(2)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(2)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- @@ CS 7
- .word NS9750_MEM_DYN_CFG(3)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(3)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- .word NS9750_MEM_DYN_CTRL
- .word (NS9750_MEM_DYN_CTRL_I_PALL | \
- NS9750_MEM_DYN_CTRL_SR | \
- NS9750_MEM_DYN_CTRL_CE )
-
- .word NS9750_MEM_DYN_REFRESH
- .word (0x1 & NS9750_MEM_DYN_REFRESH_MA)
- @@ No further register settings after refresh
-_MEM_CONFIG_END:
-
-_MEM_MODE_START:
- .word NS9750_MEM_DYN_REFRESH
- .word (0x30 & NS9750_MEM_DYN_REFRESH_MA)
-
- .word NS9750_MEM_DYN_CTRL
- .word (NS9750_MEM_DYN_CTRL_I_MODE | \
- NS9750_MEM_DYN_CTRL_SR | \
- NS9750_MEM_DYN_CTRL_CE )
-_MEM_MODE_END:
-
-_MEM_ENABLE_START:
- .word NS9750_MEM_DYN_CTRL
- .word (NS9750_MEM_DYN_CTRL_I_NORMAL | \
- NS9750_MEM_DYN_CTRL_SR | \
- NS9750_MEM_DYN_CTRL_CE )
-
- @@ CS 4
- .word NS9750_MEM_DYN_CFG(0)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- @@ CS 5
- .word NS9750_MEM_DYN_CFG(1)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- @@ CS 6
- .word NS9750_MEM_DYN_CFG(2)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- @@ CS 7
- .word NS9750_MEM_DYN_CFG(3)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-_MEM_ENABLE_END:
-
-_AHB_MONITOR_START:
- .word NS9750_SYS_AHB_TIMEOUT
- .word 0x01000100 @ @TODO not calculated yet
-
- .word NS9750_SYS_AHB_MON
- .word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \
- NS9750_SYS_AHB_MON_BATC_GEN_IRQ)
-_AHB_MONITOR_END:
-
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c
deleted file mode 100644
index fc46244..0000000
--- a/board/ns9750dev/ns9750dev.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij at ti.com>
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- * Markus Pietrek <mpietrek at fsforth.de>
- * derived from omap1610innovator.c
- * @References: [1] NS9750 Hardware Reference/December 2003
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#if defined(CONFIG_NS9750DEV)
-# include <./configs/ns9750dev.h>
-# include <./ns9750_bbus.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void flash__init( void );
-void ether__init( void );
-
-static inline void delay( unsigned long loops )
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-
-/***********************************************************************
- * @Function: board_init
- * @Return: 0
- * @Descr: Enables BBUS modules and other devices
- ***********************************************************************/
-
-int board_init( void )
-{
- /* Active BBUS modules */
- *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0;
-
-#warning Please register your machine at http://www.arm.linux.org.uk/developer/machines/?action=new
- /* arch number of OMAP 1510-Board */
- /* to be changed for OMAP 1610 Board */
- gd->bd->bi_arch_number = 234;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
-
-/* this speeds up your boot a quite a bit. However to make it
- * work, you need make sure your kernel startup flush bug is fixed.
- * ... rkw ...
- */
- icache_enable();
-
- flash__init();
- ether__init();
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- /* currently empty */
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-#if CONFIG_NR_DRAM_BANKS > 1
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-#endif
- return 0;
-}
diff --git a/doc/README.ns9750dev b/doc/README.ns9750dev
deleted file mode 100644
index 2991440..0000000
--- a/doc/README.ns9750dev
+++ /dev/null
@@ -1,36 +0,0 @@
-U-Boot Port to the NS9750 DevKit from NetSilicon
-
-1 Overview
-2 Board Configuration
-3 Installation
-
-
-1 Overview
-----------
-
-This port supports these NS9750 features.
-
-o one UART
-
-2 Board Configuration
----------------------
-
-Switches:
-SW10: 4
-SW11: 6,7
-SW16: 6,7,8
-SW17-SW20: 1
-SW4: 3, 6
-SW 1: 1
-SW2: 4
-SW3: 3
-SW8: 3 (rotated by 180 degree!!!!)
-
-Serial Console is Port B (bottom right port)
-
-3 Installation
---------------
-
-Have fun,
---
-Markus Pietrek <mpietrek at fsforth.de>
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 9ad9296..53d9924 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek at fsforth.de>
AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd at denx.de>
c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd at denx.de>
ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd at denx.de>
diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt
index c6a8ab0..ef71fea 100644
--- a/doc/driver-model/UDM-serial.txt
+++ b/doc/driver-model/UDM-serial.txt
@@ -86,7 +86,7 @@ III) Analysis of in-tree drivers
7) ns9750_serial.c
------------------
- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
+ Unmaintained port. Code got removed.
8) opencores_yanu.c
-------------------
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5e8b648..de3f471 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,7 +33,6 @@ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o
COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
COBJS-$(CONFIG_MCFUART) += mcfuart.o
-COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c
deleted file mode 100644
index 85fc68a..0000000
--- a/drivers/serial/ns9750_serial.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Serial driver for the NS9750. Only one UART is supported yet.
- * @References: [1] NS9750 Hardware Reference/December 2003
- * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#include <common.h>
-
-#include "ns9750_bbus.h" /* for GPIOs */
-#include "ns9750_ser.h" /* for serial configuration */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_CONS_INDEX)
-#error "No console index specified."
-#endif
-
-#define CONSOLE CONFIG_CONS_INDEX
-
-static unsigned int calcBitrateRegister( void );
-static unsigned int calcRxCharGapRegister( void );
-
-static char cCharsAvailable; /* Numbers of chars in unCharCache */
-static unsigned int unCharCache; /* unCharCache is only valid if
- * cCharsAvailable > 0 */
-
-/***********************************************************************
- * @Function: serial_init
- * @Return: 0
- * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off
- ***********************************************************************/
-
-static int ns9750_serial_init(void)
-{
- unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 };
- unsigned int aunGPIORxD[] = { 1, 9, 41, 45 };
-
- cCharsAvailable = 0;
-
- /* configure TxD and RxD pins for their special function */
- set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT );
- set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT );
-
- /* configure serial engine */
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) =
- NS9750_SER_CTRL_A_CE |
- NS9750_SER_CTRL_A_STOP |
- NS9750_SER_CTRL_A_WLS_8;
-
- serial_setbrg();
-
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) =
- NS9750_SER_CTRL_B_RCGT;
-
- return 0;
-}
-
-/***********************************************************************
- * @Function: serial_putc
- * @Return: n/a
- * @Descr: writes one character to the FIFO. Blocks until FIFO is not full
- ***********************************************************************/
-
-static void ns9750_serial_putc(const char c)
-{
- if (c == '\n')
- serial_putc( '\r' );
-
- while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) &
- NS9750_SER_STAT_A_TRDY ) ) {
- /* do nothing, wait for characters in FIFO sent */
- }
-
- *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE) = c;
-}
-
-/***********************************************************************
- * @Function: serial_getc
- * @Return: the character read
- * @Descr: performs only 8bit accesses to the FIFO. No error handling
- ***********************************************************************/
-
-static int ns9750_serial_getc(void)
-{
- int i;
-
- while (!serial_tstc() ) {
- /* do nothing, wait for incoming characters */
- }
-
- /* at least one character in unCharCache */
- i = (int) (unCharCache & 0xff);
-
- unCharCache >>= 8;
- cCharsAvailable--;
-
- return i;
-}
-
-/***********************************************************************
- * @Function: serial_tstc
- * @Return: 0 if no input available, otherwise != 0
- * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in
- * unCharCache and the numbers of characters in cCharsAvailable
- ***********************************************************************/
-
-static int ns9750_serial_tstc(void)
-{
- unsigned int unRegCache;
-
- if ( cCharsAvailable )
- return 1;
-
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE );
- if( unRegCache & NS9750_SER_STAT_A_RBC ) {
- *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) =
- NS9750_SER_STAT_A_RBC;
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,
- CONSOLE );
- }
-
- if ( unRegCache & NS9750_SER_STAT_A_RRDY ) {
- cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20;
- if ( !cCharsAvailable )
- cCharsAvailable = 4;
-
- unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE );
- return 1;
- }
-
- /* no chars available */
- return 0;
-}
-
-static void ns9750_serial_setbrg(void)
-{
- *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) =
- calcBitrateRegister();
- *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) =
- calcRxCharGapRegister();
-}
-
-/***********************************************************************
- * @Function: calcBitrateRegister
- * @Return: value for the serial bitrate register
- * @Descr: register value depends on clock frequency and baudrate
- ***********************************************************************/
-
-static unsigned int calcBitrateRegister( void )
-{
- return ( NS9750_SER_BITRATE_EBIT |
- NS9750_SER_BITRATE_CLKMUX_BCLK |
- NS9750_SER_BITRATE_TMODE |
- NS9750_SER_BITRATE_TCDR_16 |
- NS9750_SER_BITRATE_RCDR_16 |
- ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */
- ( gd->baudrate * 16 ) ) - 1 ) &
- NS9750_SER_BITRATE_N_MA ) );
-}
-
-/***********************************************************************
- * @Function: calcRxCharGapRegister
- * @Return: value for the character gap timer register
- * @Descr: register value depends on clock frequency and baudrate. Currently 0
- * is used as there is a bug with the gap timer in PLL bypass mode.
- ***********************************************************************/
-
-static unsigned int calcRxCharGapRegister( void )
-{
- return NS9750_SER_RX_CHAR_TIMER_TRUN;
-}
-
-static struct serial_device ns9750_serial_drv = {
- .name = "ns9750_serial",
- .start = ns9750_serial_init,
- .stop = NULL,
- .setbrg = ns9750_serial_setbrg,
- .putc = ns9750_serial_putc,
- .puts = default_serial_puts,
- .getc = ns9750_serial_getc,
- .tstc = ns9750_serial_tstc,
-};
-
-void ns9750_serial_initialize(void)
-{
- serial_register(&ns9750_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &ns9750_serial_drv;
-}
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index f5f43a6..d77d89f 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -94,7 +94,6 @@ serial_initfunc(altera_serial_initialize);
serial_initfunc(atmel_serial_initialize);
serial_initfunc(lpc32xx_serial_initialize);
serial_initfunc(mcf_serial_initialize);
-serial_initfunc(ns9750_serial_initialize);
serial_initfunc(oc_serial_initialize);
serial_initfunc(s3c64xx_serial_initialize);
serial_initfunc(sandbox_serial_initialize);
@@ -189,7 +188,6 @@ void serial_initialize(void)
atmel_serial_initialize();
lpc32xx_serial_initialize();
mcf_serial_initialize();
- ns9750_serial_initialize();
oc_serial_initialize();
s3c64xx_serial_initialize();
sandbox_serial_initialize();
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
deleted file mode 100644
index 3f49c6f..0000000
--- a/include/configs/ns9750dev.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- * Markus Pietrek <mpietrek at fsforth.de>
- *
- * Configuation settings for the NetSilicon NS9750 DevBoard
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */
-#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */
-
-#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2)
-#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4)
-#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8)
-
-/*@TODO #define CONFIG_STATUS_LED*/
-#define CONFIG_USE_IRQ
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NS9750_UART 1 /* use on-chip UART */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX 1 /* Port B */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 3
-/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
-
-#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.42.30
-#define CONFIG_SERVERIP 192.168.42.1
-
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */
-
-#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64)
-
-#define NS9750_ETH_PHY_ADDRESS (0x0000)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-/* TODO */
-#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
-#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */
-
-#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* @TODO*/
-#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
-#if 0
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* @TODO */
-/*#define CONFIG_ENV_IS_IN_FLASH 1*/
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-
-#ifdef CONFIG_STATUS_LED
-
-extern void __led_init(led_id_t mask, int state);
-extern void __led_toggle(led_id_t mask);
-extern void __led_set(led_id_t mask, int state);
-
-#endif /* CONFIG_STATUS_LED */
-
-#endif /* __CONFIG_H */
diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h
deleted file mode 100644
index 9485338..0000000
--- a/include/ns9750_bbus.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Definitions for BBus usage
- * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_BBUS_H
-#define FS_NS9750_BBUS_H
-
-#define NS9750_BBUS_MODULE_BASE (0x90600000)
-
-#define get_bbus_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c)))
-
-/* We have support for 50 GPIO pins */
-
-#define get_gpio_cfg_reg_addr(pin) \
- get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) )
-
-/* To Read/Modify/Write a pin configuration register, use it like
- set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT );
- They should be wrapped by cli()/sti() */
-#define set_gpio_cfg_reg_val(pin,cfg) \
- *get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \
- ~NS9750_GPIO_CFG_MASK((pin))) |\
- NS9750_GPIO_CFG_VAL((pin),(cfg));
-
-#define NS9750_GPIO_CFG_MASK(pin) (NS9750_GPIO_CFG_VAL(pin, \
- NS9750_GPIO_CFG_MA))
-#define NS9750_GPIO_CFG_VAL(pin,cfg) ((cfg) << (((pin) % 8) * 4))
-
-#define NS9750_GPIO_CFG_MA (0x0F)
-#define NS9750_GPIO_CFG_INPUT (0x00)
-#define NS9750_GPIO_CFG_OUTPUT (0x08)
-#define NS9750_GPIO_CFG_FUNC_GPIO (0x03)
-#define NS9750_GPIO_CFG_FUNC_2 (0x02)
-#define NS9750_GPIO_CFG_FUNC_1 (0x01)
-#define NS9750_GPIO_CFG_FUNC_0 (0x00)
-
-/* the register addresses */
-
-#define NS9750_BBUS_MASTER_RESET (0x00)
-#define NS9750_BBUS_GPIO_CFG_BASE (0x10)
-#define NS9750_BBUS_GPIO_CTRL_BASE (0x30)
-#define NS9750_BBUS_GPIO_STAT_BASE (0x40)
-#define NS9750_BBUS_MONITOR (0x50)
-#define NS9750_BBUS_DMA_INT_STAT (0x60)
-#define NS9750_BBUS_DMA_INT_ENABLE (0x64)
-#define NS9750_BBUS_USB_CFG (0x70)
-#define NS9750_BBUS_ENDIAN_CFG (0x80)
-#define NS9750_BBUS_ARM_WAKE_UP (0x90)
-
-/* register bit fields */
-
-#define NS9750_BBUS_MASTER_RESET_UTIL (0x00000100)
-#define NS9750_BBUS_MASTER_RESET_I2C (0x00000080)
-#define NS9750_BBUS_MASTER_RESET_1284 (0x00000040)
-#define NS9750_BBUS_MASTER_RESET_SER4 (0x00000020)
-#define NS9750_BBUS_MASTER_RESET_SER3 (0x00000010)
-#define NS9750_BBUS_MASTER_RESET_SER2 (0x00000008)
-#define NS9750_BBUS_MASTER_RESET_SER1 (0x00000004)
-#define NS9750_BBUS_MASTER_RESET_USB (0x00000002)
-#define NS9750_BBUS_MASTER_RESET_DMA (0x00000001)
-
-/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */
-
-#define NS9750_BBUS_DMA_INT_BINT16 (0x00010000)
-#define NS9750_BBUS_DMA_INT_BINT15 (0x00008000)
-#define NS9750_BBUS_DMA_INT_BINT14 (0x00004000)
-#define NS9750_BBUS_DMA_INT_BINT13 (0x00002000)
-#define NS9750_BBUS_DMA_INT_BINT12 (0x00001000)
-#define NS9750_BBUS_DMA_INT_BINT11 (0x00000800)
-#define NS9750_BBUS_DMA_INT_BINT10 (0x00000400)
-#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200)
-#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100)
-#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080)
-#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040)
-#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020)
-#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010)
-#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008)
-#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004)
-#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002)
-#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001)
-
-#define NS9750_BBUS_USB_CFG_OUTEN (0x00000008)
-#define NS9750_BBUS_USB_CFG_SPEED (0x00000004)
-#define NS9750_BBUS_USB_CFG_CFG_MA (0x00000003)
-#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003)
-#define NS9750_BBUS_USB_CFG_CFG_DEVICE (0x00000002)
-#define NS9750_BBUS_USB_CFG_CFG_HOST (0x00000001)
-#define NS9750_BBUS_USB_CFG_CFG_DIS (0x00000000)
-
-#define NS9750_BBUS_ENDIAN_CFG_AHBM (0x00001000)
-#define NS9750_BBUS_ENDIAN_CFG_I2C (0x00000080)
-#define NS9750_BBUS_ENDIAN_CFG_IEEE1284 (0x00000040)
-#define NS9750_BBUS_ENDIAN_CFG_SER4 (0x00000020)
-#define NS9750_BBUS_ENDIAN_CFG_SER3 (0x00000010)
-#define NS9750_BBUS_ENDIAN_CFG_SER2 (0x00000008)
-#define NS9750_BBUS_ENDIAN_CFG_SER1 (0x00000004)
-#define NS9750_BBUS_ENDIAN_CFG_USB (0x00000002)
-#define NS9750_BBUS_ENDIAN_CFG_DMA (0x00000001)
-
-#endif /* FS_NS9750_BBUS_H */
diff --git a/include/ns9750_mem.h b/include/ns9750_mem.h
deleted file mode 100644
index 666e412..0000000
--- a/include/ns9750_mem.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_mem.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Definitions for Memory Control Module
- * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 5
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_MEM_H
-#define FS_NS9750_SYS_H
-
-#define NS9750_MEM_MODULE_BASE (0xA0700000)
-
-#define get_mem_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_MEM_MODULE_BASE+(unsigned int) (c)))
-
-/* the register addresses */
-
-#define NS9750_MEM_CTRL (0x0000)
-#define NS9750_MEM_STATUS (0x0004)
-#define NS9750_MEM_CFG (0x0008)
-#define NS9750_MEM_DYN_CTRL (0x0020)
-#define NS9750_MEM_DYN_REFRESH (0x0024)
-#define NS9750_MEM_DYN_READ_CFG (0x0028)
-#define NS9750_MEM_DYN_TRP (0x0030)
-#define NS9750_MEM_DYN_TRAS (0x0034)
-#define NS9750_MEM_DYN_TSREX (0x0038)
-#define NS9750_MEM_DYN_TAPR (0x003C)
-#define NS9750_MEM_DYN_TDAL (0x0040)
-#define NS9750_MEM_DYN_TWR (0x0044)
-#define NS9750_MEM_DYN_TRC (0x0048)
-#define NS9750_MEM_DYN_TRFC (0x004C)
-#define NS9750_MEM_DYN_TXSR (0x0050)
-#define NS9750_MEM_DYN_TRRD (0x0054)
-#define NS9750_MEM_DYN_TMRD (0x0058)
-#define NS9750_MEM_STAT_EXT_WAIT (0x0080)
-#define NS9750_MEM_DYN_CFG_BASE (0x0100)
-#define NS9750_MEM_DYN_RAS_CAS_BASE (0x0104)
-#define NS9750_MEM_STAT_CFG_BASE (0x0200)
-#define NS9750_MEM_STAT_WAIT_WEN_BASE (0x0204)
-#define NS9750_MEM_STAT_WAIT_OEN_BASE (0x0208)
-#define NS9750_MEM_STAT_WAIT_RD_BASE (0x020C)
-#define NS9750_MEM_STAT_WAIT_PAGE_BASE (0x0210)
-#define NS9750_MEM_STAT_WAIR_WR_BASE (0x0214)
-#define NS9750_MEM_STAT_WAIT_TURN_BASE (0x0218)
-
-/* the vectored register addresses */
-
-#define NS9750_MEM_DYN_CFG(c) (NS9750_MEM_DYN_CFG_BASE + (c)*0x20)
-#define NS9750_MEM_DYN_RAS_CAS(c) (NS9750_MEM_DYN_RAS_CAS_BASE + (c)*0x20)
-#define NS9750_MEM_STAT_CFG(c) (NS9750_MEM_STAT_CFG_BASE + (c)*0x20)
-#define NS9750_MEM_STAT_WAIT_WEN(c) (NS9750_MEM_STAT_WAIT_WEN_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_WAIT_OEN(c) (NS9750_MEM_STAT_WAIT_OEN_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_RD(c) (NS9750_MEM_STAT_WAIT_RD_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_PAGE(c) (NS9750_MEM_STAT_WAIT_PAGE_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_WR(c) (NS9750_MEM_STAT_WAIT_WR_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_TURN(c) (NS9750_MEM_STAT_WAIT_TURN_BASE+(c)*0x20)
-
-/* register bit fields */
-
-#define NS9750_MEM_CTRL_L (0x00000004)
-#define NS9750_MEM_CTRL_M (0x00000002)
-#define NS9750_MEM_CTRL_E (0x00000001)
-
-#define NS9750_MEM_STAT_SA (0x00000004)
-#define NS9750_MEM_STAT_S (0x00000002)
-#define NS9750_MEM_STAT_B (0x00000001)
-
-#define NS9750_MEM_CFG_CLK (0x00000010)
-#define NS9750_MEM_CFG_N (0x00000001)
-
-#define NS9750_MEM_DYN_CTRL_NRP (0x00004000)
-#define NS9750_MEM_DYN_CTRL_DP (0x00002000)
-#define NS9750_MEM_DYN_CTRL_I_MA (0x00000180)
-#define NS9750_MEM_DYN_CTRL_I_NORMAL (0x00000000)
-#define NS9750_MEM_DYN_CTRL_I_MODE (0x00000080)
-#define NS9750_MEM_DYN_CTRL_I_PALL (0x00000100)
-#define NS9750_MEM_DYN_CTRL_I_NOP (0x00000180)
-#define NS9750_MEM_DYN_CTRL_SR (0x00000002)
-#define NS9750_MEM_DYN_CTRL_CE (0x00000001)
-
-
-#define NS9750_MEM_DYN_REFRESH_MA (0x000007FF)
-
-#define NS9750_MEM_DYN_READ_CFG_MA (0x00000003)
-#define NS9750_MEM_DYN_READ_CFG_DELAY0 (0x00000001)
-#define NS9750_MEM_DYN_READ_CFG_DELAY1 (0x00000002)
-#define NS9750_MEM_DYN_READ_CFG_DELAY2 (0x00000003)
-
-#define NS9750_MEM_DYN_TRP_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TRAS_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TSREX_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TAPR_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TDAL_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TWR_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TRC_MA (0x0000001F)
-
-#define NS9750_MEM_DYN_TRFC_MA (0x0000001F)
-
-#define NS9750_MEM_DYN_TXSR_MA (0x0000001F)
-
-#define NS9750_MEM_DYN_TRRD_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TMRD_MA (0x0000000F)
-
-#define NS9750_MEM_STAT_EXTW_WAIT_MA (0x0000003F)
-
-#define NS9750_MEM_DYN_CFG_P (0x00100000)
-#define NS9750_MEM_DYN_CFG_BDMC (0x00080000)
-#define NS9750_MEM_DYN_CFG_AM (0x00004000)
-#define NS9750_MEM_DYN_CFG_AM_MA (0x00001F80)
-#define NS9750_MEM_DYN_CFG_MD (0x00000018)
-
-#define NS9750_MEM_DYN_RAS_CAS_CAS_MA (0x00000300)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_1 (0x00000100)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_2 (0x00000200)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_3 (0x00000300)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_MA (0x00000003)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_1 (0x00000001)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_2 (0x00000002)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_3 (0x00000003)
-
-#define NS9750_MEM_STAT_CFG_PSMC (0x00100000)
-#define NS9750_MEM_STAT_CFG_BSMC (0x00080000)
-#define NS9750_MEM_STAT_CFG_EW (0x00000100)
-#define NS9750_MEM_STAT_CFG_PB (0x00000080)
-#define NS9750_MEM_STAT_CFG_PC (0x00000040)
-#define NS9750_MEM_STAT_CFG_PM (0x00000008)
-#define NS9750_MEM_STAT_CFG_MW_MA (0x00000003)
-#define NS9750_MEM_STAT_CFG_MW_8 (0x00000000)
-#define NS9750_MEM_STAT_CFG_MW_16 (0x00000001)
-#define NS9750_MEM_STAT_CFG_MW_32 (0x00000002)
-
-#define NS9750_MEM_STAT_WAIT_WEN_MA (0x0000000F)
-
-#define NS9750_MEM_STAT_WAIT_OEN_MA (0x0000000F)
-
-#define NS9750_MEM_STAT_WAIT_RD_MA (0x0000001F)
-
-#define NS9750_MEM_STAT_WAIT_PAGE_MA (0x0000001F)
-
-#define NS9750_MEM_STAT_WAIT_WR_MA (0x0000001F)
-
-#define NS9750_MEM_STAT_WAIT_TURN_MA (0x0000000F)
-
-
-#endif /* FS_NS9750_MEM_H */
diff --git a/include/ns9750_ser.h b/include/ns9750_ser.h
deleted file mode 100644
index b5c297e..0000000
--- a/include/ns9750_ser.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_ser.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @References: [1] NS9750 Hardware Reference, December 2003
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_SER_H
-#define FS_NS9750_SER_H
-
-#define NS9750_SER_MODULE_BASE (0x90200000)
-
-#define get_ser_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_SER_MODULE_BASE+(unsigned int) (c)))
-
-#define get_ser_reg_addr_channel(reg,chan) \
- get_ser_reg_addr((reg)+(((chan)<2)?0:0x00100000)+(((chan)&1)?0x40:0))
-
-/* the register addresses */
-
-#define NS9750_SER_CTRL_A (0x00)
-#define NS9750_SER_CTRL_B (0x04)
-#define NS9750_SER_STAT_A (0x08)
-#define NS9750_SER_BITRATE (0x0C)
-#define NS9750_SER_FIFO (0x10)
-#define NS9750_SER_RX_BUF_TIMER (0x14)
-#define NS9750_SER_RX_CHAR_TIMER (0x18)
-#define NS9750_SER_RX_MATCH (0x1C)
-#define NS9750_SER_RX_MATCH_MASK (0x20)
-#define NS9750_SER_FLOW_CTRL (0x34)
-#define NS9750_SER_FLOW_CTRL_FORCE (0x38)
-
-/* register bit fields */
-
-/* control A register */
-
-#define NS9750_SER_CTRL_A_CE (0x80000000)
-#define NS9750_SER_CTRL_A_BRK (0x40000000)
-#define NS9750_SER_CTRL_A_STICKP (0x20000000)
-#define NS9750_SER_CTRL_A_EPS (0x10000000)
-#define NS9750_SER_CTRL_A_PE (0x08000000)
-#define NS9750_SER_CTRL_A_STOP (0x04000000)
-#define NS9750_SER_CTRL_A_WLS_MA (0x03000000)
-#define NS9750_SER_CTRL_A_WLS_5 (0x00000000)
-#define NS9750_SER_CTRL_A_WLS_6 (0x01000000)
-#define NS9750_SER_CTRL_A_WLS_7 (0x02000000)
-#define NS9750_SER_CTRL_A_WLS_8 (0x03000000)
-#define NS9750_SER_CTRL_A_CTSTX (0x00800000)
-#define NS9750_SER_CTRL_A_RTSRX (0x00400000)
-#define NS9750_SER_CTRL_A_RL (0x00200000)
-#define NS9750_SER_CTRL_A_LL (0x00100000)
-#define NS9750_SER_CTRL_A_RES (0x000CF000)
-#define NS9750_SER_CTRL_A_DTR (0x00020000)
-#define NS9750_SER_CTRL_A_RTS (0x00010000)
-#define NS9750_SER_CTRL_A_RIE_MA (0x00000E00)
-#define NS9750_SER_CTRL_A_ERXDMA (0x00000100)
-#define NS9750_SER_CTRL_A_RIC_MA (0x000000E0)
-#define NS9750_SER_CTRL_A_TIC_MA (0x0000001E)
-#define NS9750_SER_CTRL_A_ETXDMA (0x00000001)
-
-/* control B register */
-
-#define NS9750_SER_CTRL_B_RDM1 (0x80000000)
-#define NS9750_SER_CTRL_B_RDM2 (0x40000000)
-#define NS9750_SER_CTRL_B_RDM3 (0x20000000)
-#define NS9750_SER_CTRL_B_RDM4 (0x10000000)
-#define NS9750_SER_CTRL_B_RBGT (0x08000000)
-#define NS9750_SER_CTRL_B_RCGT (0x04000000)
-#define NS9750_SER_CTRL_B_MODE_MA (0x00300000)
-#define NS9750_SER_CTRL_B_MODE_UART (0x00000000)
-#define NS9750_SER_CTRL_B_MODE_HDLC (0x00100000)
-#define NS9750_SER_CTRL_B_MODE_SPI_M (0x00200000)
-#define NS9750_SER_CTRL_B_MODE_SPI_S (0x00300000)
-#define NS9750_SER_CTRL_B_BITORDR (0x00080000)
-#define NS9750_SER_CTRL_B_RES (0x0007703F)
-#define NS9750_SER_CTRL_B_RTSTX (0x00008000)
-#define NS9750_SER_CTRL_B_ENDEC_MA (0x00000FC0)
-
-/* status A register */
-
-#define NS9750_SER_STAT_A_MATCH1 (0x80000000)
-#define NS9750_SER_STAT_A_MATCH2 (0x40000000)
-#define NS9750_SER_STAT_A_MATCH3 (0x20000000)
-#define NS9750_SER_STAT_A_MATCH4 (0x10000000)
-#define NS9750_SER_STAT_A_BGAP (0x08000000)
-#define NS9750_SER_STAT_A_CGAP (0x04000000)
-#define NS9750_SER_STAT_A_RXFDB_MA (0x00300000)
-#define NS9750_SER_STAT_A_RXFDB_FULL (0x00000000)
-#define NS9750_SER_STAT_A_RXFDB_1 (0x00100000)
-#define NS9750_SER_STAT_A_RXFDB_2 (0x00200000)
-#define NS9750_SER_STAT_A_RXFDB_3 (0x00300000)
-#define NS9750_SER_STAT_A_DCD (0x00080000)
-#define NS9750_SER_STAT_A_RI (0x00040000)
-#define NS9750_SER_STAT_A_DSR (0x00020000)
-#define NS9750_SER_STAT_A_CTS (0x00010000)
-#define NS9750_SER_STAT_A_RBRK (0x00008000)
-#define NS9750_SER_STAT_A_RFE (0x00004000)
-#define NS9750_SER_STAT_A_RPE (0x00002000)
-#define NS9750_SER_STAT_A_ROVER (0x00001000)
-#define NS9750_SER_STAT_A_RRDY (0x00000800)
-#define NS9750_SER_STAT_A_RHALF (0x00000400)
-#define NS9750_SER_STAT_A_RBC (0x00000200)
-#define NS9750_SER_STAT_A_RFULL (0x00000100)
-#define NS9750_SER_STAT_A_DCDI (0x00000080)
-#define NS9750_SER_STAT_A_RII (0x00000040)
-#define NS9750_SER_STAT_A_DSRI (0x00000020)
-#define NS9750_SER_STAT_A_CTSI (0x00000010)
-#define NS9750_SER_STAT_A_TRDY (0x00000008)
-#define NS9750_SER_STAT_A_THALF (0x00000004)
-#define NS9750_SER_STAT_A_TBC (0x00000002)
-#define NS9750_SER_STAT_A_TEMPTY (0x00000001)
-
-#define NS9750_SER_STAT_A_RX_COND_ERR ( NS9750_SER_STAT_A_RFE | \
- NS9750_SER_STAT_A_ROVER | \
- NS9750_SER_STAT_A_RPE )
-#define NS9750_SER_STAT_A_RX_COND_ALL ( NS9750_SER_STAT_A_RX_COND_ERR | \
- NS9750_SER_STAT_A_RBRK | \
- NS9750_SER_STAT_A_RRDY | \
- NS9750_SER_STAT_A_RHALF | \
- NS9750_SER_STAT_A_RBC | \
- NS9750_SER_STAT_A_DCDI | \
- NS9750_SER_STAT_A_RII | \
- NS9750_SER_STAT_A_DSRI | \
- NS9750_SER_STAT_A_CTSI )
-#define NS9750_SER_STAT_A_TX_COND_ALL ( NS9750_SER_STAT_A_TRDY | \
- NS9750_SER_STAT_A_THALF | \
- NS9750_SER_STAT_A_TBC | \
- NS9750_SER_STAT_A_TEMPTY )
-/* bit rate register */
-
-#define NS9750_SER_BITRATE_EBIT (0x80000000)
-#define NS9750_SER_BITRATE_TMODE (0x40000000)
-#define NS9750_SER_BITRATE_RXSRC (0x20000000)
-#define NS9750_SER_BITRATE_TXSRC (0x10000000)
-#define NS9750_SER_BITRATE_RXEXT (0x08000000)
-#define NS9750_SER_BITRATE_TXEXT (0x04000000)
-#define NS9750_SER_BITRATE_CLKMUX_MA (0x03000000)
-#define NS9750_SER_BITRATE_CLKMUX_XTAL (0x00000000)
-#define NS9750_SER_BITRATE_CLKMUX_BCLK (0x01000000)
-#define NS9750_SER_BITRATE_CLKMUX_OUT1 (0x02000000)
-#define NS9750_SER_BITRATE_CLKMUX_OUT2 (0x03000000)
-#define NS9750_SER_BITRATE_TXCINV (0x00800000)
-#define NS9750_SER_BITRATE_RXCINV (0x00400000)
-#define NS9750_SER_BITRATE_TCDR_MA (0x00180000)
-#define NS9750_SER_BITRATE_TCDR_1 (0x00000000)
-#define NS9750_SER_BITRATE_TCDR_8 (0x00080000)
-#define NS9750_SER_BITRATE_TCDR_16 (0x00100000)
-#define NS9750_SER_BITRATE_TCDR_32 (0x00180000)
-#define NS9750_SER_BITRATE_RCDR_MA (0x00070000)
-#define NS9750_SER_BITRATE_RCDR_1 (0x00000000)
-#define NS9750_SER_BITRATE_RCDR_8 (0x00020000)
-#define NS9750_SER_BITRATE_RCDR_16 (0x00040000)
-#define NS9750_SER_BITRATE_RCDR_32 (0x00060000)
-#define NS9750_SER_BITRATE_TICS (0x00010000)
-#define NS9750_SER_BITRATE_RICS (0x00008000)
-#define NS9750_SER_BITRATE_N_MA (0x00007FFF)
-
-/* receive buffer gap timer */
-
-#define NS9750_SER_RX_BUF_TIMER_TRUN (0x80000000) /* UART and SPI */
-#define NS9750_SER_RX_BUF_TIMER_BT_MA (0x0000FFFF) /* UART and SPI */
-#define NS9750_SER_RX_BUF_TIMER_MAXLEN_MA (0x0000FFFF) /* HDLC only */
-
-/* receive character gap timer */
-
-#define NS9750_SER_RX_CHAR_TIMER_TRUN (0x80000000)
-#define NS9750_SER_RX_CHAR_TIMER_CT_MA (0x000FFFFF)
-
-/* receive match */
-
-#define NS9750_SER_RX_MATCH_RDMB1_MA (0xFF000000)
-#define NS9750_SER_RX_MATCH_RDMB2_MA (0x00FF0000)
-#define NS9750_SER_RX_MATCH_RDMB3_MA (0x0000FF00)
-#define NS9750_SER_RX_MATCH_RDMB4_MA (0x000000FF)
-
-/* receive match mask */
-
-#define NS9750_SER_RX_MATCH_MASK_RDMB1_MA (0xFF000000)
-#define NS9750_SER_RX_MATCH_MASK_RDMB2_MA (0x00FF0000)
-#define NS9750_SER_RX_MATCH_MASK_RDMB3_MA (0x0000FF00)
-#define NS9750_SER_RX_MATCH_MASK_RDMB4_MA (0x000000FF)
-
-#endif /* FS_NS9750_SER_H */
diff --git a/include/ns9750_sys.h b/include/ns9750_sys.h
deleted file mode 100644
index f1dc2b2..0000000
--- a/include/ns9750_sys.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_sys.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Definitions for SYS Control Module
- * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 4
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_SYS_H
-#define FS_NS9750_SYS_H
-
-#define NS9750_SYS_MODULE_BASE (0xA0900000)
-
-#define get_sys_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_SYS_MODULE_BASE+(unsigned int) (c)))
-
-/* the register addresses */
-
-#define NS9750_SYS_AHB_GEN (0x0000)
-#define NS9750_SYS_BRC_BASE (0x0004)
-#define NS9750_SYS_AHB_TIMEOUT (0x0014)
-#define NS9750_SYS_AHB_ERROR1 (0x0018)
-#define NS9750_SYS_AHB_ERROR2 (0x001C)
-#define NS9750_SYS_AHB_MON (0x0020)
-#define NS9750_SYS_TIMER_COUNT_BASE (0x0044)
-#define NS9750_SYS_TIMER_READ_BASE (0x0084)
-#define NS9750_SYS_INT_VEC_ADR_BASE (0x00C4)
-#define NS9750_SYS_INT_CFG_BASE (0x0144)
-#define NS9750_SYS_ISRADDR (0x0164)
-#define NS9750_SYS_INT_STAT_ACTIVE (0x0168)
-#define NS9750_SYS_INT_STAT_RAW (0x016C)
-#define NS9750_SYS_TIMER_INT_STAT (0x0170)
-#define NS9750_SYS_SW_WDOG_CFG (0x0174)
-#define NS9750_SYS_SW_WDOG_TIMER (0x0178)
-#define NS9750_SYS_CLOCK (0x017C)
-#define NS9750_SYS_RESET (0x0180)
-#define NS9750_SYS_MISC (0x0184)
-#define NS9750_SYS_PLL (0x0188)
-#define NS9750_SYS_ACT_INT_STAT (0x018C)
-#define NS9750_SYS_TIMER_CTRL_BASE (0x0190)
-#define NS9750_SYS_CS_DYN_BASE_BASE (0x01D0)
-#define NS9750_SYS_CS_DYN_MASK_BASE (0x01D4)
-#define NS9750_SYS_CS_STATIC_BASE_BASE (0x01F0)
-#define NS9750_SYS_CS_STATIC_MASK_BASE (0x01F4)
-#define NS9750_SYS_GEN_ID (0x0210)
-#define NS9750_SYS_EXT_INT_CTRL_BASE (0x0214)
-
-/* the vectored register addresses */
-
-#define NS9750_SYS_TIMER_COUNT(c) (NS9750_SYS_TIMER_COUNT_BASE + (c))
-#define NS9750_SYS_TIMER_READ(c) (NS9750_SYS_TIMER_READ_BASE + (c))
-#define NS9750_SYS_INT_VEC_ADR(c) (NS9750_SYS_INT_VEC_ADR_BASE + (c))
-#define NS9750_SYS_TIMER_CTRL(c) (NS9750_SYS_TIMER_CTRL_BASE + (c))
-/* CS_DYN start with 4 */
-#define NS9750_SYS_CS_DYN_BASE(c) (NS9750_SYS_CS_DYN_BASE_BASE + ((c)-4)*2)
-#define NS9750_SYS_CS_DYN_MASK(c) (NS9750_SYS_CS_DYN_MASK_BASE + ((c)-4)*2)
-/* CS_STATIC start with 0 */
-#define NS9750_SYS_CS_STATIC_BASE(c) (NS9750_SYS_CS_STATIC_BASE_BASE + (c)*2)
-#define NS9750_SYS_CS_STATIC_MASK(c) (NS9750_SYS_CS_STATIC_MASK_BASE + (c)*2)
-#define NS9750_SYS_EXT_INT_CTRL(c) (NS9750_SYS_EXT_INT_CTRL + (c))
-
-/* register bit fields */
-
-#define NS9750_SYS_AHB_GEN_EXMAM (0x00000001)
-
-/* need to be n*8bit to BRC channel */
-#define NS9750_SYS_BRC_CEB (0x00000080)
-#define NS9750_SYS_BRC_BRF_MA (0x00000030)
-#define NS9750_SYS_BRC_BRF_100 (0x00000000)
-#define NS9750_SYS_BRC_BRF_75 (0x00000010)
-#define NS9750_SYS_BRC_BRF_50 (0x00000020)
-#define NS9750_SYS_BRC_BRF_25 (0x00000030)
-
-#define NS9750_SYS_AHB_TIMEOUT_BAT_MA (0xFFFF0000)
-#define NS9750_SYS_AHB_TIMEOUT_BMT_MA (0x0000FFFF)
-
-#define NS9750_SYS_AHB_ERROR2_ABL (0x00040000)
-#define NS9750_SYS_AHB_ERROR2_AER (0x00020000)
-#define NS9750_SYS_AHB_ERROR2_ABM (0x00010000)
-#define NS9750_SYS_AHB_ERROR2_ABA (0x00008000)
-#define NS9750_SYS_AHB_ERROR2_HWRT (0x00004000)
-#define NS9750_SYS_AHB_ERROR2_HMID_MA (0x00003C00)
-#define NS9750_SYS_AHB_ERROR2_HTPC_MA (0x000003C0)
-#define NS9750_SYS_AHB_ERROR2_HSZ_MA (0x00000038)
-#define NS9750_SYS_AHB_ERROR2_RR_MA (0x00000007)
-
-#define NS9750_SYS_AHB_MON_EIC (0x00800000)
-#define NS9750_SYS_AHB_MON_MBII (0x00400000)
-#define NS9750_SYS_AHB_MON_MBL_MA (0x003FFFC0)
-#define NS9750_SYS_AHB_MON_MBLDC (0x00000020)
-#define NS9750_SYS_AHB_MON_SERDC (0x00000010)
-#define NS9750_SYS_AHB_MON_BMTC_MA (0x0000000C)
-#define NS9750_SYS_AHB_MON_BMTC_RECORD (0x00000000)
-#define NS9750_SYS_AHB_MON_BMTC_GEN_IRQ (0x00000004)
-#define NS9750_SYS_AHB_MON_BMTC_GEN_RES (0x00000008)
-#define NS9750_SYS_AHB_MON_BATC_MA (0x00000003)
-#define NS9750_SYS_AHB_MON_BATC_RECORD (0x00000000)
-#define NS9750_SYS_AHB_MON_BATC_GEN_IRQ (0x00000001)
-#define NS9750_SYS_AHB_MON_BATC_GEN_RES (0x00000002)
-
-/* need to be n*8bit to Int Level */
-
-#define NS9750_SYS_INT_CFG_IE (0x00000080)
-#define NS9750_SYS_INT_CFG_IT (0x00000020)
-#define NS9750_SYS_INT_CFG_IAD_MA (0x0000001F)
-
-#define NS9750_SYS_TIMER_INT_STAT_MA (0x0000FFFF)
-
-#define NS9750_SYS_SW_WDOG_CFG_SWWE (0x00000080)
-#define NS9750_SYS_SW_WDOG_CFG_SWWI (0x00000020)
-#define NS9750_SYS_SW_WDOG_CFG_SWWIC (0x00000010)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_MA (0x00000007)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_2 (0x00000000)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_4 (0x00000001)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_8 (0x00000002)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_16 (0x00000003)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_32 (0x00000004)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_64 (0x00000005)
-
-#define NS9750_SYS_CLOCK_LPCS_MA (0x00000380)
-#define NS9750_SYS_CLOCK_LPCS_1 (0x00000000)
-#define NS9750_SYS_CLOCK_LPCS_2 (0x00000080)
-#define NS9750_SYS_CLOCK_LPCS_4 (0x00000100)
-#define NS9750_SYS_CLOCK_LPCS_8 (0x00000180)
-#define NS9750_SYS_CLOCK_LPCS_EXT (0x00000200)
-#define NS9750_SYS_CLOCK_BBC (0x00000040)
-#define NS9750_SYS_CLOCK_LCC (0x00000020)
-#define NS9750_SYS_CLOCK_MCC (0x00000010)
-#define NS9750_SYS_CLOCK_PARBC (0x00000008)
-#define NS9750_SYS_CLOCK_PC (0x00000004)
-#define NS9750_SYS_CLOCK_MACC (0x00000001)
-
-#define NS9750_SYS_RESET_SR (0x80000000)
-#define NS9750_SYS_RESET_I2CW (0x00100000)
-#define NS9750_SYS_RESET_CSE (0x00080000)
-#define NS9750_SYS_RESET_SMWE (0x00040000)
-#define NS9750_SYS_RESET_EWE (0x00020000)
-#define NS9750_SYS_RESET_PI3WE (0x00010000)
-#define NS9750_SYS_RESET_BBT (0x00000040)
-#define NS9750_SYS_RESET_LCDC (0x00000020)
-#define NS9750_SYS_RESET_MEMC (0x00000010)
-#define NS9750_SYS_RESET_PCIAR (0x00000008)
-#define NS9750_SYS_RESET_PCIM (0x00000004)
-#define NS9750_SYS_RESET_MACM (0x00000001)
-
-#define NS9750_SYS_MISC_REV_MA (0xFF000000)
-#define NS9750_SYS_MISC_PCIA (0x00002000)
-#define NS9750_SYS_MISC_VDIS (0x00001000)
-#define NS9750_SYS_MISC_BMM (0x00000800)
-#define NS9750_SYS_MISC_CS1DB (0x00000400)
-#define NS9750_SYS_MISC_CS1DW_MA (0x00000300)
-#define NS9750_SYS_MISC_MCCM (0x00000080)
-#define NS9750_SYS_MISC_PMSS (0x00000040)
-#define NS9750_SYS_MISC_CS1P (0x00000020)
-#define NS9750_SYS_MISC_ENDM (0x00000008)
-#define NS9750_SYS_MISC_MBAR (0x00000004)
-#define NS9750_SYS_MISC_IRAM0 (0x00000001)
-
-#define NS9750_SYS_PLL_PLLBS (0x02000000)
-#define NS9750_SYS_PLL_PLLFS_MA (0x01800000)
-#define NS9750_SYS_PLL_PLLIS_MA (0x00600000)
-#define NS9750_SYS_PLL_PLLND_MA (0x001F0000)
-#define NS9750_SYS_PLL_PLLSW (0x00008000)
-#define NS9750_SYS_PLL_PLLBSSW (0x00000200)
-#define NS9750_SYS_PLL_FSEL_MA (0x00000180)
-#define NS9750_SYS_PLL_CPCC_MA (0x00000060)
-#define NS9750_SYS_PLL_NDSW_MA (0x0000001F)
-
-#define NS9750_SYS_ACT_INT_STAT_MA (0x0000FFFF)
-
-#define NS9750_SYS_TIMER_CTRL_TEN (0x00008000)
-#define NS9750_SYS_TIMER_CTRL_INTC (0x00000200)
-#define NS9750_SYS_TIMER_CTRL_TLCS_MA (0x000001C0)
-#define NS9750_SYS_TIMER_CTRL_TLCS_1 (0x00000000)
-#define NS9750_SYS_TIMER_CTRL_TLCS_2 (0x00000040)
-#define NS9750_SYS_TIMER_CTRL_TLCS_4 (0x00000080)
-#define NS9750_SYS_TIMER_CTRL_TLCS_8 (0x000000C0)
-#define NS9750_SYS_TIMER_CTRL_TLCS_16 (0x00000100)
-#define NS9750_SYS_TIMER_CTRL_TLCS_32 (0x00000140)
-#define NS9750_SYS_TIMER_CTRL_TLCS_64 (0x00000180)
-#define NS9750_SYS_TIMER_CTRL_TLCS_EXT (0x000001C0)
-#define NS9750_SYS_TIMER_CTRL_TM_MA (0x00000030)
-#define NS9750_SYS_TIMER_CTRL_TM_INT (0x00000000)
-#define NS9750_SYS_TIMER_CTRL_TM_LOW (0x00000010)
-#define NS9750_SYS_TIMER_CTRL_TM_HIGH (0x00000020)
-#define NS9750_SYS_TIMER_CTRL_INTS (0x00000008)
-#define NS9750_SYS_TIMER_CTRL_UDS (0x00000004)
-#define NS9750_SYS_TIMER_CTRL_TSZ (0x00000002)
-#define NS9750_SYS_TIMER_CTRL_REN (0x00000001)
-
-#define NS9750_SYS_EXT_INT_CTRL_STS (0x00000008)
-#define NS9750_SYS_EXT_INT_CTRL_CLR (0x00000004)
-#define NS9750_SYS_EXT_INT_CTRL_PLTY (0x00000002)
-#define NS9750_SYS_EXT_INT_CTRL_LVEDG (0x00000001)
-
-#endif /* FS_NS9750_SYS_H */
--
1.7.11.7
More information about the U-Boot
mailing list