[U-Boot] [PATCH V3 00/20] Make mv_udc work for i.mx6
Troy Kisky
troy.kisky at boundarydevices.com
Fri Aug 2 01:27:17 CEST 2013
Hi Marek, Stefano
This series is based on u-boot-usb/master branch.
After this series, nitrogen6x works with tftpboot to transfer
files over usb.
V2 was dropped to my bad posting of it and should be ignored.
This V3 is a rebase and most patches had to be changed slightly.
I also ran a ./MAKEALL -a arm and fixed the errors that the V1
series had.
The most noticeable change is the addition of
usb: gadget: mv_udc: fix hardware udc address for i.MX6
Let me know if you want to go back to a udc variable
to store the address instead of using hcor.
Stefano, would you like to take patches 1-5 ?
I'll likely need a V3, but maybe the early ones
will be approved.
Thanks
Troy Kisky (20):
Add functions for use with i.mx6 otg udc
mx6: iomux: add GPR1 defines
nitrogen6x: add otg usb ethernet gadget support
nitrogen6x: add CONFIG_MV_UDC
arch-mxs/sys_proto.h: include regs-common.h
usb: gadget: mv_udc: fix hardware udc address for i.MX6
usb: gadget: config: fix unaligned access issues
usb: gadget: mv_udc: add MX6Q specific reset
usb: gadget: ether set wMaxPacketSize
usb: gadget: ether: return error from rx_submit if no request
usb: gadget: mv_udc: split mv_udc.h file
usb: udc: add udc.h include file
usb: gadget: mv_udc: fix typo in error message
usb: gadget: mv_udc: set is_dualspeed = 1
usb: gadget: mv_udc: fix full speed connections
usb: gadget: mv_udc: optimize bounce
usb: gadget: mv_udc: flush item before head
usb: gadget: mv_udc: optimize ep_enable
usb: gadget: mv_udc: zero transfer descriptor memory on probe
usb: gadget: mv_udc: clear desc upon ep_disable
arch/arm/cpu/armv7/mx6/soc.c | 47 ++++++++++
arch/arm/include/asm/arch-mx6/crm_regs.h | 3 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 17 ++++
arch/arm/include/asm/arch-mx6/iomux.h | 6 ++
arch/arm/include/asm/arch-mx6/sys_proto.h | 4 +
arch/arm/include/asm/arch-mxs/sys_proto.h | 2 +
board/boundary/nitrogen6x/nitrogen6x.c | 16 ++++
drivers/serial/usbtty.h | 3 +-
drivers/usb/gadget/config.c | 6 +-
drivers/usb/gadget/designware_udc.c | 1 +
drivers/usb/gadget/ether.c | 4 +
drivers/usb/gadget/mpc8xx_udc.c | 1 +
drivers/usb/gadget/mv_udc.c | 141 +++++++++++++++++++-----------
drivers/usb/gadget/mv_udc.h | 115 ++++++++++++++++++++++++
drivers/usb/gadget/omap1510_udc.c | 1 +
drivers/usb/gadget/pxa27x_udc.c | 1 +
drivers/usb/musb/musb_udc.c | 3 +-
include/configs/nitrogen6x.h | 6 ++
include/usb/designware_udc.h | 31 -------
include/usb/mpc8xx_udc.h | 19 +---
include/usb/musb_udc.h | 40 ---------
include/usb/mv_udc.h | 118 -------------------------
include/usb/omap1510_udc.h | 27 +-----
include/usb/pxa27x_udc.h | 26 +-----
include/usb/udc.h | 63 +++++++++++++
25 files changed, 389 insertions(+), 312 deletions(-)
create mode 100644 drivers/usb/gadget/mv_udc.h
delete mode 100644 include/usb/musb_udc.h
create mode 100644 include/usb/udc.h
--
1.8.1.2
More information about the U-Boot
mailing list