[U-Boot] [PATCH] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
Heiko Schocher
hs at denx.de
Sat Aug 3 06:58:25 CEST 2013
- add omap24xx driver to new multibus/multiadpater support
- adapted all config files, which uses this driver
Tested on the am335x based siemens boards rut, dxr2 and pxm2
posted here:
http://patchwork.ozlabs.org/patch/263211/
Based on u-boot-ti git://git.denx.de/u-boot-ti.git master:
commit bb2a5d8f87fffb4fadfb205837decbd1b3e75f88
Author: Dan Murphy <dmurphy at ti.com>
Date: Thu Jul 11 13:10:28 2013 -0500
gpio: omap5-uevm: Configure the tca6424 gpio expander
Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Lars Poeschel <poeschel at lemonage.de>
Cc: Steve Sakoman <sakoman at gmail.com>
Cc: Thomas Weber <weber at corscience.de>
Cc: Tom Rix <Tom.Rix at windriver.com>
Cc: Grazvydas Ignotas <notasas at gmail.com>
Cc: Enric Balletbo i Serra <eballetbo at iseebcn.com>
Cc: Luca Ceresoli <luca.ceresoli at comelit.it>
Cc: Igor Grinberg <grinberg at compulab.co.il>
Cc: Ilya Yanok <yanok at emcraft.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Nishanth Menon <nm at ti.com>
Cc: Pali Rohár <pali.rohar at gmail.com>
Cc: Peter Barada <peter.barada at logicpd.com>
Cc: Nagendra T S <nagendra at mistralsolutions.com>
Cc: Michael Jones <michael.jones at matrix-vision.de>
Cc: Raphael Assenat <raph at 8d.com>
---
README | 13 ++
arch/arm/cpu/armv7/omap-common/clocks-common.c | 3 +-
arch/arm/cpu/armv7/omap3/board.c | 2 +-
arch/arm/cpu/armv7/omap3/clock.c | 2 +-
arch/arm/include/asm/arch-am33xx/i2c.h | 6 +-
board/compulab/cm_t35/Makefile | 2 +-
board/compulab/cm_t35/cm_t35.c | 2 +-
board/compulab/cm_t35/eeprom.h | 2 +-
board/logicpd/am3517evm/am3517evm.c | 4 +-
board/overo/overo.c | 2 +-
board/phytec/pcm051/board.c | 4 +-
board/ti/am335x/board.c | 2 +-
board/ti/am3517crane/am3517crane.c | 4 +-
board/ti/evm/evm.c | 4 +-
drivers/i2c/Makefile | 4 +-
drivers/i2c/omap24xx_i2c.c | 172 ++++++++++++++++---------
include/configs/am335x_evm.h | 9 +-
include/configs/am3517_crane.h | 8 +-
include/configs/am3517_evm.h | 8 +-
include/configs/cm_t35.h | 8 +-
include/configs/devkit8000.h | 8 +-
include/configs/dig297.h | 8 +-
include/configs/igep00x0.h | 8 +-
include/configs/mcx.h | 8 +-
include/configs/nokia_rx51.h | 8 +-
include/configs/omap3_beagle.h | 9 +-
include/configs/omap3_evm_common.h | 9 +-
include/configs/omap3_logic.h | 10 +-
include/configs/omap3_mvblx.h | 9 +-
include/configs/omap3_overo.h | 9 +-
include/configs/omap3_pandora.h | 8 +-
include/configs/omap3_sdp3430.h | 8 +-
include/configs/omap3_zoom1.h | 8 +-
include/configs/omap3_zoom2.h | 8 +-
include/configs/omap4_common.h | 9 +-
include/configs/omap5_common.h | 9 +-
include/configs/pcm051.h | 9 +-
include/configs/tam3517-common.h | 11 +-
include/configs/tricorder.h | 8 +-
39 Dateien geändert, 236 Zeilen hinzugefügt(+), 189 Zeilen entfernt(-)
diff --git a/README b/README
index a5c3e8d..8e93eab 100644
--- a/README
+++ b/README
@@ -1974,6 +1974,19 @@ CBFS (Coreboot Filesystem) support
- CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
- CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
+ - drivers/i2c/omap24xx_i2c.c
+ - activate this driver with CONFIG_SYS_I2C_OMAP24XX
+ - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0
+ - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0
+ - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1
+ - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1
+ - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2
+ - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2
+ - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3
+ - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3
+ - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4
+ - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4
+
additional defines:
CONFIG_SYS_NUM_I2C_BUSES
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 7580594..fc70595 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -786,7 +786,8 @@ void gpi2c_init(void)
static int gpi2c = 1;
if (gpi2c) {
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
+ CONFIG_SYS_OMAP24_I2C_SLAVE);
gpi2c = 0;
}
}
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 7d1f8d9..2922816 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -98,7 +98,7 @@ void spl_board_init(void)
gpmc_init();
#endif
#ifdef CONFIG_SPL_I2C_SUPPORT
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
}
#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 3acbc9c..7e48352 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -692,7 +692,7 @@ void per_clocks_enable(void)
sr32(&prcm_base->iclken_per, 17, 1, 1);
#endif
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
/* Turn on all 3 I2C clocks */
sr32(&prcm_base->fclken1_core, 15, 3, 0x7);
sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */
diff --git a/arch/arm/include/asm/arch-am33xx/i2c.h b/arch/arm/include/asm/arch-am33xx/i2c.h
index 8bfa53f..8642c8f 100644
--- a/arch/arm/include/asm/arch-am33xx/i2c.h
+++ b/arch/arm/include/asm/arch-am33xx/i2c.h
@@ -4,8 +4,8 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef _I2C_H_
-#define _I2C_H_
+#ifndef _I2C_AM33XX_H_
+#define _I2C_AM33XX_H_
#define I2C_BASE1 0x44E0B000
#define I2C_BASE2 0x4802A000
@@ -62,4 +62,4 @@ struct i2c {
#define I2C_IP_CLK 48000000
#define I2C_INTERNAL_SAMPLING_CLK 12000000
-#endif /* _I2C_H_ */
+#endif /* _I2C_AM33XX_H_ */
diff --git a/board/compulab/cm_t35/Makefile b/board/compulab/cm_t35/Makefile
index 6d07947..9014d2a 100644
--- a/board/compulab/cm_t35/Makefile
+++ b/board/compulab/cm_t35/Makefile
@@ -11,7 +11,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
+COBJS-$(CONFIG_SYS_I2C_OMAP34XX) += eeprom.o
COBJS-$(CONFIG_LCD) += display.o
COBJS := cm_t35.o leds.o $(COBJS-y)
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 3caa5be..1dd3647 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -470,7 +470,7 @@ static void setup_net_chip_gmpc(void)
&ctrl_base->gpmc_nadv_ale);
}
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
/*
* Routine: reset_net_chip
* Description: reset the Ethernet controller via TPS65930 GPIO
diff --git a/board/compulab/cm_t35/eeprom.h b/board/compulab/cm_t35/eeprom.h
index 02ffbb1..a07559d 100644
--- a/board/compulab/cm_t35/eeprom.h
+++ b/board/compulab/cm_t35/eeprom.h
@@ -10,7 +10,7 @@
#ifndef _EEPROM_
#define _EEPROM_
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
int cm_t3x_eeprom_read_mac_addr(uchar *buf);
u32 cm_t3x_eeprom_get_board_rev(void);
#else
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index 1cabc80..33709bd 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -98,8 +98,8 @@ static void am3517_evm_musb_init(void)
*/
int misc_init_r(void)
{
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
dieid_num_r();
diff --git a/board/overo/overo.c b/board/overo/overo.c
index a6e2e93..93ed2f7 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -92,7 +92,7 @@ int get_board_revision(void)
{
int revision;
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
unsigned char data;
/* board revisions <= R2410 connect 4030 irq_1 to gpio112 */
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 275fe82..b99983d 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -91,7 +91,7 @@ void set_mux_conf_regs(void)
{
/* Initalize the board header */
enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
enable_board_pin_mux();
}
@@ -108,7 +108,7 @@ void sdram_init(void)
*/
int board_init(void)
{
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b2bec34..daa6907 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -249,7 +249,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
struct am335x_baseboard_id header;
enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c
index 5eb97ff..a649697 100644
--- a/board/ti/am3517crane/am3517crane.c
+++ b/board/ti/am3517crane/am3517crane.c
@@ -43,8 +43,8 @@ int board_init(void)
*/
int misc_init_r(void)
{
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
dieid_num_r();
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index c71c218..81dd081 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -146,8 +146,8 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
int misc_init_r(void)
{
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
#endif
#if defined(CONFIG_CMD_NET)
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 37ccbd1..f32daea 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -17,8 +17,6 @@ COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
-COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
@@ -30,6 +28,8 @@ COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index ef38d71..3d38c03 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -35,6 +35,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <asm/arch/i2c.h>
#include <asm/io.h>
@@ -48,22 +49,14 @@ DECLARE_GLOBAL_DATA_PTR;
/* Absolutely safe for status update at 100 kHz I2C: */
#define I2C_WAIT 200
-static int wait_for_bb(void);
-static u16 wait_for_event(void);
-static void flush_fifo(void);
+static int wait_for_bb(struct i2c_adapter *adap);
+static struct i2c *omap24_get_base(struct i2c_adapter *adap);
+static u16 wait_for_event(struct i2c_adapter *adap);
+static void flush_fifo(struct i2c_adapter *adap);
-/*
- * For SPL boot some boards need i2c before SDRAM is initialised so force
- * variables to live in SRAM
- */
-static struct i2c __attribute__((section (".data"))) *i2c_base =
- (struct i2c *)I2C_DEFAULT_BASE;
-static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
- { [0 ... (I2C_BUS_MAX-1)] = 0 };
-static unsigned int __attribute__((section (".data"))) current_bus = 0;
-
-void i2c_init(int speed, int slaveadd)
+static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int psc, fsscll, fssclh;
int hsscll = 0, hssclh = 0;
u32 scll, sclh;
@@ -163,16 +156,15 @@ void i2c_init(int speed, int slaveadd)
I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
#endif
udelay(1000);
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
-
- if (gd->flags & GD_FLG_RELOC)
- bus_initialized[current_bus] = 1;
}
-static void flush_fifo(void)
-{ u16 stat;
+static void flush_fifo(struct i2c_adapter *adap)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+ u16 stat;
/* note: if you try and read data when its not there or ready
* you get a bus error
@@ -192,8 +184,9 @@ static void flush_fifo(void)
* i2c_probe: Use write access. Allows to identify addresses that are
* write-only (like the config register of dual-port EEPROMs)
*/
-int i2c_probe(uchar chip)
+static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
u16 status;
int res = 1; /* default = fail */
@@ -201,7 +194,7 @@ int i2c_probe(uchar chip)
return res;
/* Wait until bus is free */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return res;
/* No data transfer, slave addr only */
@@ -212,7 +205,7 @@ int i2c_probe(uchar chip)
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
I2C_CON_STP, &i2c_base->con);
- status = wait_for_event();
+ status = wait_for_event(adap);
if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
/*
@@ -223,7 +216,7 @@ int i2c_probe(uchar chip)
*/
if (status == I2C_STAT_XRDY)
printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto pr_exit;
}
@@ -239,7 +232,7 @@ int i2c_probe(uchar chip)
I2C_CON_STP, &i2c_base->con); /* STP */
}
pr_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return res;
@@ -258,8 +251,10 @@ pr_exit:
* or that do not need a register address at all (such as some clock
* distributors).
*/
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int i2c_error = 0;
u16 status;
@@ -287,7 +282,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
/* Wait until bus not busy */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return 1;
/* Zero, one or two bytes reg address (offset) */
@@ -308,12 +303,12 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
#endif
/* Send register offset */
while (1) {
- status = wait_for_event();
+ status = wait_for_event(adap);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto rd_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
@@ -348,7 +343,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
/* Receive data */
while (1) {
- status = wait_for_event();
+ status = wait_for_event(adap);
/*
* Try to identify bus that is not padconf'd for I2C. This
* state could be left over from previous transactions if
@@ -357,7 +352,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto rd_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
@@ -375,15 +370,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
rd_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return i2c_error;
}
/* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int i;
u16 status;
int i2c_error = 0;
@@ -415,7 +412,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
/* Wait until bus not busy */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return 1;
/* Start address phase - will write regoffset + len bytes data */
@@ -428,12 +425,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
while (alen) {
/* Must write reg offset (one or two bytes) */
- status = wait_for_event();
+ status = wait_for_event(adap);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto wr_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
@@ -455,7 +452,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
/* Address phase is over, now write data */
for (i = 0; i < len; i++) {
- status = wait_for_event();
+ status = wait_for_event(adap);
if (status == 0 || status & I2C_STAT_NACK) {
i2c_error = 1;
printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
@@ -474,7 +471,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
wr_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return i2c_error;
@@ -484,8 +481,9 @@ wr_exit:
* Wait for the bus to be free by checking the Bus Busy (BB)
* bit to become clear
*/
-static int wait_for_bb(void)
+static int wait_for_bb(struct i2c_adapter *adap)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int timeout = I2C_TIMEOUT;
u16 stat;
@@ -514,8 +512,9 @@ static int wait_for_bb(void)
* Wait for the I2C controller to complete current action
* and update status
*/
-static u16 wait_for_event(void)
+static u16 wait_for_event(struct i2c_adapter *adap)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
u16 status;
int timeout = I2C_TIMEOUT;
@@ -540,7 +539,7 @@ static u16 wait_for_event(void)
* not been configured for I2C, and/or pull-ups are missing.
*/
printf("Check if pads/pull-ups of bus %d are properly configured\n",
- current_bus);
+ adap->hwadapnr);
writew(0xFFFF, &i2c_base->stat);
status = 0;
}
@@ -548,48 +547,93 @@ static u16 wait_for_event(void)
return status;
}
-int i2c_set_bus_num(unsigned int bus)
+static struct i2c *omap24_get_base(struct i2c_adapter *adap)
{
- if (bus >= I2C_BUS_MAX) {
- printf("Bad bus: %x\n", bus);
- return -1;
- }
-
- switch (bus) {
- default:
- bus = 0; /* Fall through */
+ switch (adap->hwadapnr) {
case 0:
- i2c_base = (struct i2c *)I2C_BASE1;
+ return (struct i2c *)I2C_BASE1;
break;
case 1:
- i2c_base = (struct i2c *)I2C_BASE2;
+ return (struct i2c *)I2C_BASE2;
break;
#if (I2C_BUS_MAX > 2)
case 2:
- i2c_base = (struct i2c *)I2C_BASE3;
+ return (struct i2c *)I2C_BASE3;
break;
#if (I2C_BUS_MAX > 3)
case 3:
- i2c_base = (struct i2c *)I2C_BASE4;
+ return (struct i2c *)I2C_BASE4;
break;
#if (I2C_BUS_MAX > 4)
case 4:
- i2c_base = (struct i2c *)I2C_BASE5;
+ return (struct i2c *)I2C_BASE5;
break;
#endif
#endif
#endif
+ default:
+ printf("wrong hwadapnr: %d\n", adap->hwadapnr);
+ break;
}
+ return NULL;
+}
- current_bus = bus;
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED1)
+#define CONFIG_SYS_OMAP24_I2C_SPEED1 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE1)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE1 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
- if (!bus_initialized[current_bus])
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+U_BOOT_I2C_ADAP_COMPLETE(omap24_0, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED,
+ CONFIG_SYS_OMAP24_I2C_SLAVE,
+ 0)
+U_BOOT_I2C_ADAP_COMPLETE(omap24_1, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED1,
+ CONFIG_SYS_OMAP24_I2C_SLAVE1,
+ 1)
+#if (I2C_BUS_MAX > 2)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED2)
+#define CONFIG_SYS_OMAP24_I2C_SPEED2 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE2)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE2 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
- return 0;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_2, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED2,
+ CONFIG_SYS_OMAP24_I2C_SLAVE2,
+ 2)
+#if (I2C_BUS_MAX > 3)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED3)
+#define CONFIG_SYS_OMAP24_I2C_SPEED3 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE3)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE3 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
-int i2c_get_bus_num(void)
-{
- return (int) current_bus;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_3, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED3,
+ CONFIG_SYS_OMAP24_I2C_SLAVE3,
+ 3)
+#if (I2C_BUS_MAX > 4)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED4)
+#define CONFIG_SYS_OMAP24_I2C_SPEED4 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE4)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE4 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
+
+U_BOOT_I2C_ADAP_COMPLETE(omap24_4, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED4,
+ CONFIG_SYS_OMAP24_I2C_SLAVE4,
+ 4)
+#endif
+#endif
+#endif
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index e32066d..566b118 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -300,11 +300,10 @@
/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP24XX
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 9bf283a..436dacc 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -141,10 +141,10 @@
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 5c61697..e9cb007 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -135,10 +135,10 @@
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 39a216e..5c57ae7 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -139,10 +139,10 @@
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_I2C_MULTI_BUS
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 513121a..172b13e 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -89,10 +89,10 @@
#define CONFIG_DOS_PARTITION 1
/* I2C */
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* TWL4030 */
#define CONFIG_TWL4030_POWER 1
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index bf91625..3e87cc3 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -122,10 +122,10 @@
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index c17267e..2230f86 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -121,10 +121,10 @@
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index c2b1631..43ef3c3 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -136,10 +136,10 @@
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* RTC */
#define CONFIG_RTC_DS1337
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 36c6800..5cf852c 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -156,10 +156,10 @@
#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_OMAP3_SPI
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 4487451..8ec0292 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -160,11 +160,10 @@
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_VIDEO_OMAP3 /* DSS Support */
/*
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 3b3e25a..46fff9f 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -87,11 +87,10 @@
/*
* I2C
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* PISMO support
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 3dd6d32..4eb333b 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -117,12 +117,10 @@
/*
* I2C
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index 5526b43..67e7aad 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -127,11 +127,10 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_FPGA
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
-#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 3e018c0..7a8048f 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -97,11 +97,10 @@
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 3e8bd67..12cba69 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -110,10 +110,10 @@
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index 836a3d8..4949d66 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -113,10 +113,10 @@
/*
* I2C for power management setup
*/
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* OMITTED: single 1 Gbit MT29F1G NAND flash */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 3687045..372ee6b 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -117,10 +117,10 @@
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index c57df8e..7de8c97 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -137,10 +137,10 @@
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 719cb83..e3c0c10 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -72,11 +72,10 @@
#define CONFIG_ARCH_CPU_INIT
/* I2C */
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
-#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* TWL6030 */
#ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index 7dd56cf..fd790ed 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -66,11 +66,10 @@
#define CONFIG_ARCH_CPU_INIT
/* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* MMC */
#define CONFIG_GENERIC_MMC
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 9b16c47..9704a43 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -176,11 +176,10 @@
/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP24XX
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index c297827..b76af0e 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -116,14 +116,13 @@
#undef CONFIG_CMD_IMLS
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
/*
* Board NAND Info.
@@ -370,7 +369,7 @@ struct tam3517_module_info {
#define TAM3517_READ_EEPROM(info, ret) \
do { \
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \
(void *)info, sizeof(*info))) \
ret = 1; \
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 4e2cb65..da2581d 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -79,10 +79,10 @@
#define CONFIG_DOS_PARTITION
/* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/* TWL4030 */
#define CONFIG_TWL4030_POWER
--
1.7.11.7
More information about the U-Boot
mailing list