[U-Boot] [PATCH 07/10] TI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx
Dan Murphy
dmurphy at ti.com
Tue Aug 6 20:33:35 CEST 2013
On 08/02/2013 03:26 PM, Tom Rini wrote:
> We create two new files, include/configs/ti_armv7_common.h for all of
> the common IP blocks and related features / commands we share in
> virtually all of our platforms. We then create
> include/configs/ti_am335x_common.h for everything common to the am335x
> SoC leaving just the board specific parts to
> include/configs/ti_am335x_common.h.
>
> Signed-off-by: Tom Rini <trini at ti.com>
> ---
> include/configs/am335x_evm.h | 233 +++-------------------------------
> include/configs/ti_am335x_common.h | 57 +++++++++
> include/configs/ti_armv7_common.h | 247 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 319 insertions(+), 218 deletions(-)
> create mode 100644 include/configs/ti_am335x_common.h
> create mode 100644 include/configs/ti_armv7_common.h
>
> diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
> index 85c4632..e8f48ba 100644
> --- a/include/configs/am335x_evm.h
> +++ b/include/configs/am335x_evm.h
> @@ -16,43 +16,16 @@
> #ifndef __CONFIG_AM335X_EVM_H
> #define __CONFIG_AM335X_EVM_H
>
> -#define CONFIG_AM33XX
> -#define CONFIG_OMAP
> +#include <configs/ti_am335x_common.h>
>
> -#include <asm/arch/omap.h>
> -
> -#define CONFIG_DMA_COHERENT
> -#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
> -
> -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
> -#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
> -#define CONFIG_SYS_LONGHELP /* undef to save memory */
> -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
> -#define CONFIG_SYS_PROMPT "U-Boot# "
> -#define CONFIG_BOARD_LATE_INIT
> -#define CONFIG_SYS_NO_FLASH
> #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
> #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
>
> -#define CONFIG_OF_LIBFDT
> -#define CONFIG_CMD_BOOTZ
> -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_STACKSIZE (128 * 1024)
> -#define CONFIG_AUTO_COMPLETE
> -#define CONFIG_SETUP_MEMORY_TAGS
> -#define CONFIG_INITRD_TAG
> -
> /* Custom script for NOR */
> #define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds"
>
> -#define CONFIG_SYS_CACHELINE_SIZE 64
> -
> -/* commands to include */
> -#include <config_cmd_default.h>
> -
> -#define CONFIG_CMD_ASKENV
> -#define CONFIG_VERSION_VARIABLE
> +/* Always 128 KiB env size */
> +#define CONFIG_ENV_SIZE (128 << 10)
>
> #ifdef CONFIG_NAND
> #define NANDARGS \
> @@ -75,10 +48,8 @@
> #define NANDARGS ""
> #endif
>
> -/* set to negative value for no autoboot */
> -#define CONFIG_BOOTDELAY 1
> -#define CONFIG_ENV_VARS_UBOOT_CONFIG
> #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +
> #ifndef CONFIG_SPL_BUILD
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "loadaddr=0x80200000\0" \
> @@ -196,60 +167,11 @@
> "run mmcboot;" \
> "run nandboot;"
>
> -/* Clock Defines */
> -#define V_OSCK 24000000 /* Clock output from T2 */
> -#define V_SCLK (V_OSCK)
> -
> -#define CONFIG_CMD_ECHO
> -
> -/* We set the max number of command args high to avoid HUSH bugs. */
> -#define CONFIG_SYS_MAXARGS 64
> -
> -/* Console I/O Buffer Size */
> -#define CONFIG_SYS_CBSIZE 512
> -
> -/* Print Buffer Size */
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
> - + sizeof(CONFIG_SYS_PROMPT) + 16)
> -
> -/* Boot Argument Buffer Size */
> -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> -
> -/*
> - * memtest works on 8 MB in DRAM after skipping 32MB from
> - * start addr of ram disk
> - */
> -#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
> -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
> - + (8 * 1024 * 1024))
> -
> -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
> -
> -#define CONFIG_MMC
> -#define CONFIG_GENERIC_MMC
> -#define CONFIG_OMAP_HSMMC
> -#define CONFIG_CMD_MMC
> -#define CONFIG_DOS_PARTITION
> -#define CONFIG_CMD_FAT
> -#define CONFIG_FAT_WRITE
> -#define CONFIG_CMD_EXT2
> -#define CONFIG_CMD_EXT4
> -#define CONFIG_CMD_FS_GENERIC
> -
> -#define CONFIG_SPI
> -#define CONFIG_OMAP3_SPI
> -#define CONFIG_MTD_DEVICE
> -#define CONFIG_SPI_FLASH
> -#define CONFIG_SPI_FLASH_WINBOND
> -#define CONFIG_CMD_SF
> -#define CONFIG_SF_DEFAULT_SPEED (24000000)
> -
> /* USB Composite download gadget - g_dnl */
> #define CONFIG_USB_GADGET
> #define CONFIG_USBDOWNLOAD_GADGET
>
> /* USB TI's IDs */
> -#define CONFIG_USBD_HS
> #define CONFIG_G_DNL_VENDOR_NUM 0x0403
> #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
> #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
> @@ -283,109 +205,24 @@
> "rootfs part 0 9"
> #endif
>
> - /* Physical Memory Map */
> -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
> -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
> -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
> -
> -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
> -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
> - GENERATED_GBL_DATA_SIZE)
> - /* Platform/Board specific defs */
> -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
> -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
> -#define CONFIG_SYS_HZ 1000 /* 1ms clock */
> -
> /* NS16550 Configuration */
> -#define CONFIG_SYS_NS16550
> -#define CONFIG_SYS_NS16550_SERIAL
> -#define CONFIG_SYS_NS16550_REG_SIZE (-4)
> -#define CONFIG_SYS_NS16550_CLK (48000000)
> #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
> #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
> #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
> #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
> #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
> #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
> +#define CONFIG_BAUDRATE 115200
>
> /* I2C Configuration */
> -#define CONFIG_I2C
> -#define CONFIG_CMD_I2C
> -#define CONFIG_HARD_I2C
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#define CONFIG_SYS_I2C_SLAVE 1
> -#define CONFIG_I2C_MULTI_BUS
> -#define CONFIG_DRIVER_OMAP24XX_I2C
> #define CONFIG_CMD_EEPROM
> #define CONFIG_ENV_EEPROM_IS_ON_I2C
> #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
> #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> #define CONFIG_SYS_I2C_MULTI_EEPROMS
>
> -#define CONFIG_OMAP_GPIO
> -
> -#define CONFIG_BAUDRATE 115200
> -
> -/* CPU */
> -#define CONFIG_ARCH_CPU_INIT
> -
> -#define CONFIG_ENV_OVERWRITE 1
> -#define CONFIG_SYS_CONSOLE_INFO_QUIET
> -
> +/* SPL */
> #ifndef CONFIG_NOR_BOOT
> -/* Defines for SPL */
> -#define CONFIG_SPL
> -#define CONFIG_SPL_FRAMEWORK
> -/*
> - * Place the image at the start of the ROM defined image space.
> - * We limit our size to the ROM-defined downloaded image area, and use the
> - * rest of the space for stack.
> - */
> -#define CONFIG_SPL_TEXT_BASE 0x402F0400
> -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
> -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
> -
> -#define CONFIG_SPL_OS_BOOT
> -
> -#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
> -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> -
> -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
> -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
> -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
> -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
> -
> -#ifdef CONFIG_SPL_OS_BOOT
> -/* fat */
> -#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
> -#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
> -#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_DRAM_1 + 0x100)
> -
> -/* raw mmc */
> -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
> -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
> -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
> -
> -/* nand */
> -#ifdef CONFIG_NAND
> -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
> -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
> -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
> -#endif
> -
> -/* spl export command */
> -#define CONFIG_CMD_SPL
> -#endif
> -
> -#define CONFIG_SPL_MMC_SUPPORT
> -#define CONFIG_SPL_FAT_SUPPORT
> -#define CONFIG_SPL_I2C_SUPPORT
> -
> -#define CONFIG_SPL_LIBCOMMON_SUPPORT
> -#define CONFIG_SPL_LIBDISK_SUPPORT
> -#define CONFIG_SPL_LIBGENERIC_SUPPORT
> -#define CONFIG_SPL_SERIAL_SUPPORT
> -#define CONFIG_SPL_GPIO_SUPPORT
> #define CONFIG_SPL_YMODEM_SUPPORT
> #define CONFIG_SPL_NET_SUPPORT
> #define CONFIG_SPL_ENV_SUPPORT
> @@ -400,14 +237,7 @@
> #define CONFIG_SPL_MUSB_NEW_SUPPORT
> #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
>
> -#define CONFIG_SPL_BOARD_INIT
> -
> #ifdef CONFIG_NAND
> -#define CONFIG_SPL_NAND_AM33XX_BCH
> -#define CONFIG_SPL_NAND_SUPPORT
> -#define CONFIG_SPL_NAND_BASE
> -#define CONFIG_SPL_NAND_DRIVERS
> -#define CONFIG_SPL_NAND_ECC
> #define CONFIG_SYS_NAND_5_ADDR_CYCLE
> #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
> CONFIG_SYS_NAND_PAGE_SIZE)
> @@ -427,30 +257,16 @@
> #define CONFIG_SYS_NAND_ECCBYTES 14
>
> #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
> -
> #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
> #endif
> #endif
>
> /*
> - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
> - * 64 bytes before this address should be set aside for u-boot.img's
> - * header. That is 0x800FFFC0--0x80100000 should not be used for any
> - * other needs.
> + * For NOR boot, we must set this to the start of where NOR is mapped
> + * in memory.
> */
> #ifdef CONFIG_NOR_BOOT
> #define CONFIG_SYS_TEXT_BASE 0x08000000
> -#else
> -#define CONFIG_SYS_TEXT_BASE 0x80800000
> -#endif
> -#define CONFIG_SYS_SPL_MALLOC_START 0x80a08000
> -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
> -
> -/* Since SPL did pll and ddr initialization for us,
> - * we don't need to do it twice.
> - */
> -#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
> -#define CONFIG_SKIP_LOWLEVEL_INIT
> #endif
>
> /*
> @@ -505,7 +321,6 @@
> #define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
> #define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
> #define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
> -#define CONFIG_CMD_MTDPARTS
> #define MTDIDS_DEFAULT "nor0=m25p80-flash.0"
> #define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \
> "512k(u-boot),128k(u-boot-env1)," \
> @@ -518,22 +333,13 @@
> #define CONFIG_SYS_MMC_ENV_PART 2
> #endif
>
> -/* Unsupported features */
> -#undef CONFIG_USE_IRQ
> +/* SPI flash. */
> +#define CONFIG_CMD_SF
> +#define CONFIG_SPI_FLASH
> +#define CONFIG_SPI_FLASH_WINBOND
> +#define CONFIG_SF_DEFAULT_SPEED 24000000
>
> -#define CONFIG_CMD_NET
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_PING
> -#define CONFIG_DRIVER_TI_CPSW
> -#define CONFIG_MII
> -#define CONFIG_BOOTP_DEFAULT
> -#define CONFIG_BOOTP_DNS
> -#define CONFIG_BOOTP_DNS2
> -#define CONFIG_BOOTP_SEND_HOSTNAME
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_SUBNETMASK
> -#define CONFIG_NET_RETRY_COUNT 10
> -#define CONFIG_NET_MULTI
> +/* Network. */
> #define CONFIG_PHY_GIGE
> #define CONFIG_PHYLIB
> #define CONFIG_PHY_ADDR 0
> @@ -542,14 +348,7 @@
> /* NAND support */
> #ifdef CONFIG_NAND
> #define CONFIG_CMD_NAND
> -#define CONFIG_CMD_MTDPARTS
> -#define CONFIG_NAND_OMAP_GPMC
> #define GPMC_NAND_ECC_LP_x16_LAYOUT 1
> -#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
> - /* to access nand at */
> - /* CS0 */
> -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
> - devices */
> #if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
> #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
> #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
> @@ -578,6 +377,7 @@
> */
> #if defined(CONFIG_NOR)
> #undef CONFIG_SYS_NO_FLASH
> +#define CONFIG_CMD_FLASH
> #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
> #define CONFIG_SYS_FLASH_PROTECTION
> #define CONFIG_SYS_FLASH_CFI
> @@ -593,7 +393,6 @@
> #define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
> #define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */
> #define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */
> -#define CONFIG_CMD_MTDPARTS
> #define MTDIDS_DEFAULT "nor0=physmap-flash.0"
> #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
> "512k(u-boot)," \
> @@ -601,8 +400,6 @@
> "128k(u-boot-env2)," \
> "4m(kernel),-(rootfs)"
> #endif
> -#define CONFIG_MTD_DEVICE
> -#define CONFIG_CMD_FLASH
> #endif /* NOR support */
>
> #endif /* ! __CONFIG_AM335X_EVM_H */
> diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
> new file mode 100644
> index 0000000..a493684
> --- /dev/null
> +++ b/include/configs/ti_am335x_common.h
> @@ -0,0 +1,57 @@
> +/*
> + * ti_am335x_common.h
> + *
> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_TI_AM335X_COMMON_H__
> +#define __CONFIG_TI_AM335X_COMMON_H__
> +
> +#define CONFIG_AM33XX
> +#define CONFIG_BOARD_LATE_INIT
> +#define CONFIG_ARCH_CPU_INIT
> +#define CONFIG_SYS_CACHELINE_SIZE 64
> +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
> +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
> +
> +#include <asm/arch/omap.h>
> +
> +/* NS16550 Configuration */
> +#define CONFIG_SYS_NS16550
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_REG_SIZE (-4)
> +#define CONFIG_SYS_NS16550_CLK 48000000
> +
> +/* Network defines. */
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_PING
> +#define CONFIG_DRIVER_TI_CPSW
> +#define CONFIG_MII
> +#define CONFIG_BOOTP_DEFAULT
> +#define CONFIG_BOOTP_DNS
> +#define CONFIG_BOOTP_DNS2
> +#define CONFIG_BOOTP_SEND_HOSTNAME
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_SUBNETMASK
> +#define CONFIG_NET_RETRY_COUNT 10
> +
> +/* SPL defines. */
> +#define CONFIG_SPL_TEXT_BASE 0x402F0400
> +#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
> +#define CONFIG_SPL_YMODEM_SUPPORT
> +
> +/*
> + * Since SPL did pll and ddr initialization for us,
> + * we don't need to do it twice.
> + */
> +#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#endif
> +
> +/* Now bring in the rest of the common code. */
> +#include <configs/ti_armv7_common.h>
> +
> +#endif /* __CONFIG_TI_AM335X_COMMON_H__ */
> diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
> new file mode 100644
> index 0000000..0734598
> --- /dev/null
> +++ b/include/configs/ti_armv7_common.h
> @@ -0,0 +1,247 @@
> +/*
> + * ti_armv7_common.h
> + *
> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + *
> + * The various ARMv7 SoCs from TI all share a number of IP blocks when
> + * implementing a given feature. Rather than define these in every
> + * board or even SoC common file, we define a common file to be re-used
> + * in all cases. While technically true that some of these details are
> + * configurable at the board design, they are common throughout SoC
> + * reference platforms as well as custom designs and become de facto
> + * standards.
> + */
> +
> +#ifndef __CONFIG_TI_ARMV7_COMMON_H__
> +#define __CONFIG_TI_ARMV7_COMMON_H__
> +
> +/* Common define for many platforms. */
> +#define CONFIG_OMAP
> +
> +/*
> + * We typically do not contain NOR flash. In the cases where we do, we
> + * undefine this later.
> + */
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* Support both device trees and ATAGs. */
> +#define CONFIG_OF_LIBFDT
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +
> +/*
> + * Our DDR memory always starts at 0x80000000 and U-Boot shall have
> + * relocated itself to higher in memory by the time this value is used.
> + */
> +#define CONFIG_SYS_LOAD_ADDR 0x80000000
> +
> +/*
> + * Default to a quick boot delay.
> + */
> +#define CONFIG_BOOTDELAY 1
> +
> +/*
> + * DDR information. We say (for simplicity) that we have 1 bank,
> + * always, even when we have more. We always start at 0x80000000,
> + * and we place the initial stack pointer in our SRAM.
> + */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define CONFIG_SYS_SDRAM_BASE 0x80000000
> +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
> + GENERATED_GBL_DATA_SIZE)
> +
> +/* Timer information. */
> +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
> +#define CONFIG_SYS_HZ 1000 /* 1ms clock */
> +
> +/* I2C IP block */
> +#define CONFIG_I2C
> +#define CONFIG_CMD_I2C
> +#define CONFIG_HARD_I2C
> +#define CONFIG_SYS_I2C_SPEED 100000
> +#define CONFIG_SYS_I2C_SLAVE 1
> +#define CONFIG_I2C_MULTI_BUS
> +#define CONFIG_DRIVER_OMAP24XX_I2C
> +
> +/* MMC/SD IP block */
> +#define CONFIG_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_OMAP_HSMMC
> +#define CONFIG_CMD_MMC
> +
> +/* McSPI IP block */
> +#define CONFIG_SPI
> +#define CONFIG_OMAP3_SPI
> +
> +/* GPIO block */
> +#define CONFIG_OMAP_GPIO
> +
> +/*
> + * GPMC NAND block. We support 1 device and the physical address to
> + * access CS0 at is 0x8000000.
> + */
> +#ifdef CONFIG_NAND
> +#define CONFIG_CMD_NAND
> +#define CONFIG_NAND_OMAP_GPMC
> +#define CONFIG_SYS_NAND_BASE 0x8000000
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#endif
> +
> +/*
> + * The following are general good-enough settings for U-Boot. We set a
> + * large malloc pool as we generally have a lot of DDR, and we opt for
> + * function over binary size in the main portion of U-Boot as this is
> + * generally easily constrained later if needed. We enable the config
> + * options that give us information in the environment about what board
> + * we are on so we do not need to rely on the command prompt. We set a
> + * console baudrate of 115200 and use the default baud rate table.
> + */
> +#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_SYS_HUSH_PARSER
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_SYS_PROMPT "U-Boot# "
> +#define CONFIG_VERSION_VARIABLE
> +#define CONFIG_ENV_VARS_UBOOT_CONFIG
> +#define CONFIG_BAUDRATE 115200
> +
> +/* We set the max number of command args high to avoid HUSH bugs. */
> +#define CONFIG_SYS_MAXARGS 64
> +
> +/* Console I/O Buffer Size */
> +#define CONFIG_SYS_CBSIZE 512
> +/* Print Buffer Size */
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
> + + sizeof(CONFIG_SYS_PROMPT) + 16)
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> +
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_SYS_CONSOLE_INFO_QUIET
> +
> +/*
> + * When we have SPI, NOR or NAND flash we expect to be making use of
> + * mtdparts, both for ease of use in U-Boot and for passing information
> + * on to the Linux kernel.
> + */
> +#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND)
> +#define CONFIG_MTD_DEVICE /* Required for mtdparts */
> +#define CONFIG_CMD_MTDPARTS
> +#endif
> +
> +/*
> + * For commands to use, we take the default list and add a few other
> + * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH
> + * prior to this include, in order to skip a few commands. When we do
> + * have flash, if we expect these commands they must be enabled in that
> + * config.
> + */
> +#include <config_cmd_default.h>
> +#define CONFIG_CMD_ASKENV
> +#define CONFIG_CMD_ECHO
> +#define CONFIG_CMD_BOOTZ
> +
> +/*
> + * Common filesystems support. When we have removable storage we
> + * enabled a number of useful commands and support.
> + */
> +#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_CMD_FAT
> +#define CONFIG_FAT_WRITE
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_FS_GENERIC
> +#endif
> +
> +/*
> + * Our platforms make use of SPL to initalize the hardware (primarily
> + * memory) enough for full U-Boot to be loaded. We also support Falcon
> + * Mode so that the Linux kernel can be booted directly from SPL
> + * instead, if desired. We make use of the general SPL framework found
> + * under common/spl/. Given our generally common memory map, we set a
> + * number of related defaults and sizes here.
> + */
> +#ifndef CONFIG_NOR_BOOT
> +#define CONFIG_SPL
> +#define CONFIG_SPL_FRAMEWORK
> +#define CONFIG_SPL_OS_BOOT
> +
> +/*
> + * Place the image at the start of the ROM defined image space.
> + * We limit our size to the ROM-defined downloaded image area, and use the
> + * rest of the space for stack. We load U-Boot itself into memory at
> + * 0x80800000 for legacy reasons (to not conflict with older SPLs). We
> + * have our BSS be placed 1MiB after this, to allow for the default
> + * Linux kernel address of 0x80008000 to work, in the Falcon Mode case.
> + * We have the SPL malloc pool at the end of the BSS area.
> + */
> +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
> +#define CONFIG_SYS_TEXT_BASE 0x80800000
> +#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
> +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
> + CONFIG_SPL_BSS_MAX_SIZE)
> +#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
> +
> +/* RAW SD card / eMMC locations. */
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
> +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
> +
> +/* FAT sd card locations. */
> +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
> +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
> +
> +#ifdef CONFIG_SPL_OS_BOOT
> +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
> +
> +/* FAT */
> +#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
> +#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
> +
> +/* RAW SD card / eMMC */
> +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
> +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
> +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
> +
> +/* NAND */
> +#ifdef CONFIG_NAND
> +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
> +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
> +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
> +#endif
> +
> +/* spl export command */
> +#define CONFIG_CMD_SPL
> +#endif
> +
> +#ifdef CONFIG_MMC
> +#define CONFIG_SPL_MMC_SUPPORT
> +#define CONFIG_SPL_FAT_SUPPORT
> +#endif
> +
> +/* General parts of the framework. */
> +#define CONFIG_SPL_I2C_SUPPORT
> +#define CONFIG_SPL_LIBCOMMON_SUPPORT
> +#define CONFIG_SPL_LIBDISK_SUPPORT
> +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +#define CONFIG_SPL_SERIAL_SUPPORT
> +#define CONFIG_SPL_GPIO_SUPPORT
> +#define CONFIG_SPL_BOARD_INIT
> +
> +#ifdef CONFIG_NAND
> +#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
> +#define CONFIG_SPL_NAND_SUPPORT
> +#define CONFIG_SPL_NAND_BASE
> +#define CONFIG_SPL_NAND_DRIVERS
> +#define CONFIG_SPL_NAND_ECC
> +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
> +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
> +#endif
> +#endif
Nit pick can you add the /* CONFIG_NOR_BOOT */ so we know what this endif is for?
> +
> +#endif /* __CONFIG_TI_ARMV7_COMMON_H__ */
--
------------------
Dan Murphy
More information about the U-Boot
mailing list