[U-Boot] [PATCH v8 RESEND 2/2] console: usb: kbd: To improve TFTP booting performance
Marek Vasut
marex at denx.de
Sun Aug 11 20:08:33 CEST 2013
Dear Jim Lin,
> TFTP booting is slow when a USB keyboard is installed and
> stdin has usbkbd added.
> This fix is to change Ctrl-C polling for USB keyboard to every second
> when NET transfer is running.
>
> Signed-off-by: Jim Lin <jilin at nvidia.com>
> ---
> Changes in v2:
> 1. Change configuration name from CONFIG_CTRLC_POLL_MS to
> CONFIG_CTRLC_POLL_S. 2. New code will be executed only when
> CONFIG_CTRLC_POLL_S is defined in configuration header file.
> 3. Add description in README.console.
> Changes in v3:
> 1. Move changes to common/usb_kbd.c and doc/README.usb
> 2. Rename config setting to CONFIG_USBKB_TESTC_PERIOD.
> 3. Remove slow response on USB-keyboard input when TFTP boot is not
> running. Changes in v4:
> 1. Remove changes in doc/README.usb, common/usb_kbd.c and
> CONFIG_USBKB_TESTC_PERIOD
> 2. Modify net/net.c
> Changes in v5:
> 1. Change variable name to ctrlc_t_start.
> 2. Use two calls of get_timer(0) to get time gap.
> Changes in v6:
> 1. In common/usb_kbd.c, check net_busy_flag to determine whether we poll
> USB keyboard status.
> 2. In include/usb.h, add external variable declaration net_busy_flag
> Changes in v7:
> 1. In common/usb_kbd.c and include/usb.h, add #ifdef CONFIG_CMD_NET.
> 2. In common/usb_kbd.c, modify code to get correct time gap.
> Changes in v8:
> 1. Add __maybe_unused for variable kbd_testc_tms.
>
> common/usb_kbd.c | 13 +++++++++++++
> include/usb.h | 2 +-
> 2 files changed, 14 insertions(+), 1 deletions(-)
>
> diff --git a/common/usb_kbd.c b/common/usb_kbd.c
> index 3174b5e..4e7b304 100644
> --- a/common/usb_kbd.c
> +++ b/common/usb_kbd.c
> @@ -121,6 +121,9 @@ struct usb_kbd_pdata {
> uint8_t flags;
> };
>
> +/* The period of time between two calls of usb_kbd_testc(). */
> +static unsigned long __maybe_unused kbd_testc_tms;
> +
> /* Generic keyboard event polling. */
> void usb_kbd_generic_poll(void)
> {
> @@ -366,6 +369,16 @@ static int usb_kbd_testc(void)
> struct usb_device *usb_kbd_dev;
> struct usb_kbd_pdata *data;
>
> +#ifdef CONFIG_CMD_NET
> + /*
> + * If net_busy_flag is 1, NET transfer is running,
> + * then we check key-pressed every second (first check may be
> + * less than 1 second) to improve TFTP booting performance.
> + */
> + if (net_busy_flag && (get_timer(kbd_testc_tms) < CONFIG_SYS_HZ))
> + return 0;
> + kbd_testc_tms = get_timer(0);
> +#endif
> dev = stdio_get_by_name(DEVNAME);
> usb_kbd_dev = (struct usb_device *)dev->priv;
> data = usb_kbd_dev->privptr;
> diff --git a/include/usb.h b/include/usb.h
> index d7b082d..5c95bf5 100644
> --- a/include/usb.h
> +++ b/include/usb.h
> @@ -206,7 +206,7 @@ int usb_host_eth_scan(int mode);
>
> int drv_usb_kbd_init(void);
> int usb_kbd_deregister(void);
> -
> +extern int __maybe_unused net_busy_flag;
I wonder what would happen if you declared it here as
static int __maybe_unused
Would it have some side-effects?
> #endif
> /* routines */
> int usb_init(void); /* initialize the USB Controller */
Othewise,
Acked-by: Marek Vasut <marex at denx.de>
Best regards,
Marek Vasut
More information about the U-Boot
mailing list