[U-Boot] [PATCH v2] Add NanoBone board support

[Mark Jackson]

On 11/08/13 19:34, Tom Rini wrote:
> On Sun, Aug 11, 2013 at 09:31:00AM +0100, Mark Jackson wrote:
> 
>> On 22/04/13 13:46, Mark Jackson wrote:
>>> NanoBone Specification:
>>> -----------------------
>>> CPU:
>>>   TI AM335x
>>>
>>> Memory:
>>>   256MB DDR3
>>>   64MB NOR flash
>>>   256MB NAND flash
>>>   128KB FRAM
>>>
>>> Ethernet:
>>>   2 x 10/100 connected to SMSC LAN8710 PHY
>>>
>>> USB:
>>>   1 x USB2.0 Type A
>>>
>>> I2C:
>>>   2Kbit EEPROM (Microchip 24AA02)
>>>   RTC (Maxim DS1338)
>>>   GPIO Expander (Microchip MCP23017)
>>>
>>> Expansion connector:
>>>   6 x UART
>>>   1 x MMC/SD
>>>   1 x USB2.0
>>>
>>> Signed-off-by: Mark Jackson <mpfj at newflow.co.uk>
>>> ---
>>> Changes in v2:
>>> - Tweaked after comments from Tom Rini
>>>
>>>  MAINTAINERS                     |    4 +
>>>  board/newflow/nanobone/Makefile |   46 ++++++
>>>  board/newflow/nanobone/board.c  |  304
>>> +++++++++++++++++++++++++++++++++++++++
>>>  board/newflow/nanobone/board.h  |   24 ++++
>>>  board/newflow/nanobone/mux.c    |  203 ++++++++++++++++++++++++++
>>>  boards.cfg                      |    1 +
>>>  include/configs/nanobone.h      |  285 ++++++++++++++++++++++++++++++++++++
>>>  7 files changed, 867 insertions(+)
>>>  create mode 100644 board/newflow/nanobone/Makefile
>>>  create mode 100644 board/newflow/nanobone/board.c
>>>  create mode 100644 board/newflow/nanobone/board.h
>>>  create mode 100644 board/newflow/nanobone/mux.c
>>>  create mode 100644 include/configs/nanobone.h
>>
>> Any chance this board can be added ?
> 
> I guess the email asking for you to re-send got lost, the copy in
> patchwork appears to be whitespace corrupted.  Since you need to re-send
> anyhow (sorry) please update to use the SPDX tags now, thanks.

Hmmm ... nope, never got that one !!

I'll repost an updated patch.

Cheers