[U-Boot] [PATCH] powerpc/p1010rdb: fix calculating ddr_freq_mhz

[Shengzhou Liu]

There was a bug for calculating ddr_freq_mhz,
it should be divided by 1000000 rather than 0x1000000.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
---
 board/freescale/p1010rdb/spl_minimal.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c
index 73289f3..d0e712e 100644
--- a/board/freescale/p1010rdb/spl_minimal.c
+++ b/board/freescale/p1010rdb/spl_minimal.c
@@ -26,7 +26,7 @@ void sdram_init(void)
 
 	ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
 	ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-	ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
+	ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 1000000;
 
 	/* mask off E bit */
 	u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
-- 
1.7.0.4