[U-Boot] [PATCH v4 0/8] am335x: NOR support

[Mark Jackson]

On 13/08/13 16:11, Tom Rini wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On 08/13/2013 11:06 AM, Mark Jackson wrote:
>> On 13/08/13 16:00, Tom Rini wrote:
>>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
>>>
>>> On 08/13/2013 10:57 AM, Mark Jackson wrote:
>>>> On 30/07/13 14:28, Tom Rini wrote:
>>>>> On Thu, Jul 18, 2013 at 03:12:57PM -0400, Tom Rini wrote:
>>>>>
>>>>>> Hey all,
>>>>>>
>>>>>> This series adds NOR support to am335x_evm, along with a 
>>>>>> few generic changes to make gpmc clearer (for per-board 
>>>>>> things like different NOR chips, etc).  This series
>>>>>> depends on the last go-round of the am335x falcon mode docs
>>>>>> as that adds the README that I add more content to. And
>>>>>> while I say this in 3/8, to be clear, I expect to drop 3/8
>>>>>> in favor of Justin Waters' way of doing this instead, I
>>>>>> just include this here for completeness and will get it all
>>>>>> happy together when I assemble things in u-boot-ti.
>>>>>>
>>>>>> The big changes in v4 are: - Apply again to master which 
>>>>>> includes a few non-trivial updates, so the linker script 
>>>>>> got re-synced. - After checking what's going on, and 
>>>>>> testing with NAND again, we can be common with 
>>>>>> gpmc_cfg->irqstatus/enable, and only set documented bits
>>>>>> in gpmc_cfg->config
>>>>>
>>>>> Applied to u-boot-ti/master, thanks!
>>>>
>>>> I'm now rebasing our NanoBone code onto the TI uboot code, but 
>>>> I'm coming up with the original issue [1] of having to not 
>>>> check for the R_ARM_RELATIVE relocations again.
>>>
>>> Your linker script is out of sync with arch/arm/cpu/u-boot.lds
>>
>> Strange ... since the am335x nor_boot compile appeared to work 
>> fine, I just copied the script from board/ti/am335x, and assumed
>> it would work fine for me (with a library path change).
>>
>> So does this TI file also need updating ?
>>
>> Either way, my code now compiles.
> 
> I had to re-sync the TI one in this series as well.  Double check
> between what you have working now vs before, there's a few small
> changes there...

Doh ... I was copying the script from the non-TI branch of uboot !!

:-(