[U-Boot] [PATCH v2 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver

Pekon Gupta pekon at ti.com
Wed Aug 14 08:16:51 CEST 2013


[changes in v2]
- added documentation for CONFIG_NAND_OMAP_xx in doc/README.nand
- added CONFIG_BCH along with CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
  to include software library lib/bch.c
- fixed board_nand_init() and omap_enable_hwecc()

[Original v1]
This patch series updates BCH8_ECC schemes in mtd/nand/omap_gpmc.c driver
- adds scalability for higher ECC schemes in future.
- removes CONFIG_AM335x and it makes it generic for all platforms.
- optimizes read_data paths

This series is tested for H/W BCH8_ECC scheme on
- AM335x_EVM and TI814x_EVM

Pekon Gupta (4):
[PATCH 1/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
[PATCH 2/4] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes
[PATCH 3/4] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes
[PATCH 4/4] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes

 doc/README.nand              |  20 ++
 drivers/mtd/nand/omap_gpmc.c | 514 +++++++++++++++----------------------------
 include/configs/am335x_evm.h |   1 +
 include/configs/ti814x_evm.h |   2 +-
 include/configs/tricorder.h  |   2 +-
 5 files changed, 203 insertions(+), 336 deletions(-)

-- 
1.8.1



More information about the U-Boot mailing list