[U-Boot] [PATCH 0/4] arm, da850: add ipam390 board support
Tom Rini
trini at ti.com
Fri Aug 16 15:35:21 CEST 2013
On Mon, Aug 05, 2013 at 04:00:34PM +0200, Heiko Schocher wrote:
> add the am1808 based ipam390 board from Barix.
>
> - 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM
> interface
> - 128MByte, NAND Flash, 8bit databus to the NANDFlash
> Interface
> - Ethernet PHY Micrel KSZ8051R via RMII
> - Console on UART 0
> - booting fron nand flash
> - spl falcon bootmode
>
> Needed patches posted on the ML but not yet in mainline:
> - [U-Boot,05/10] arm: spl: For Falcon Mode, set a default machid of ~0
> http://patchwork.ozlabs.org/patch/264336/
>
> applies on git://git.denx.de/u-boot-ti.git master
> last commit:
>
> commit 500a0daeecf36b72797c53ef78d9ad096a464d32
> Author: Dan Murphy <dmurphy at ti.com>
> Date: Thu Jul 11 13:10:27 2013 -0500
> gpio: tca642x: Add the tca642x gpio expander driver
>
> I am on vacation for two weeks, so I maybe not able to respond
> immediately but as the merge window closes soon, I post this
> board support now ...
>
> Heiko Schocher (4):
> arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in
> emac_pins_rmii pinmux
> bootstage: get more BOOTSTAGE_ID* in show_boot_progress()
> arm, da850: enable the correct uart in arch_cpu_init()
> arm, da850: add ipam390 board support
>
> MAINTAINERS | 1 +
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 4 +
> arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 6 +
> arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +-
> board/Barix/ipam390/Makefile | 29 ++
> board/Barix/ipam390/README.ipam390 | 229 ++++++++++++++++
> board/Barix/ipam390/ipam390-ais-uart.cfg | 202 ++++++++++++++
> board/Barix/ipam390/ipam390.c | 348 ++++++++++++++++++++++++
> board/Barix/ipam390/u-boot-spl-ipam390.lds | 53 ++++
> boards.cfg | 1 +
> include/bootstage.h | 1 +
> include/configs/ipam390.h | 331 ++++++++++++++++++++++
> 12 Dateien ge??ndert, 1207 Zeilen hinzugef??gt(+), 1 Zeile entfernt(-)
> create mode 100644 board/Barix/ipam390/Makefile
> create mode 100644 board/Barix/ipam390/README.ipam390
> create mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg
> create mode 100644 board/Barix/ipam390/ipam390.c
> create mode 100644 board/Barix/ipam390/u-boot-spl-ipam390.lds
> create mode 100644 include/configs/ipam390.h
Applied to u-boot-ti/master, thanks.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130816/1efd197a/attachment.pgp>
More information about the U-Boot
mailing list