[U-Boot] [PATCH] net: macb: fix the following building warning
Bo Shen
voice.shen at atmel.com
Mon Aug 19 04:35:47 CEST 2013
fix the following building warning
---8>---
macb.c: In function 'macb_init':
macb.c:400:14: warning: 'phydev' may be used uninitialized in this function
macb.c:377:21: note: 'phydev' was declared here
---<8---
Signed-off-by: Bo Shen <voice.shen at atmel.com>
---
drivers/net/macb.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 1f7cc32..bf3983a 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -36,6 +36,7 @@
#include <asm/io.h>
#include <asm/dma-mapping.h>
#include <asm/arch/clk.h>
+#include <asm-generic/errno.h>
#include "macb.h"
@@ -397,9 +398,14 @@ static int macb_phy_init(struct macb_device *macb)
}
#ifdef CONFIG_PHYLIB
- phydev->bus = macb->bus;
- phydev->dev = netdev;
- phydev->addr = macb->phy_addr;
+ /* need to consider other phy interface mode */
+ phydev = phy_connect(macb->bus, macb->phy_addr, netdev,
+ PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ printf("phy_connect failed\n");
+ return -ENODEV;
+ }
+
phy_config(phydev);
#endif
--
1.7.9.5
More information about the U-Boot
mailing list