[U-Boot] [PATCH 0/6 V2] EXYNOS: I2S: Enable I2S0 channel
Rajeshwari Birje
rajeshwari.birje at gmail.com
Mon Aug 19 10:27:29 CEST 2013
Acked-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
Tested-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
On Sun, Aug 4, 2013 at 12:14 PM, Dani Krishna Mohan
<krishna.md at samsung.com> wrote:
> This patch set replaces I2S1 channel with I2S0 channel.
> Corresponding changes have been done in audio codec to
> support I2S0 channel.
>
> Changes in V2:
> - Added cover letter.
> - Configured GPIO chipselect to enable MAX98095 codec.
>
> Dani Krishna Mohan (6):
> Sound: WM8994: Support I2S0 channel
> DTS: Addition of I2S0 channel and replacing I2S1
> ARM: Change from I2S1 to I2S0 for audio on SMDK5250
> Sound: I2S: Replacing I2S1 with I2S0 channel.
> DTS: Addition of GPIO chipselect for MAX98095
> Sound: MAX98095: Support I2S0 channel
>
> arch/arm/cpu/armv7/exynos/clock.c | 13 ++--
> arch/arm/cpu/armv7/exynos/pinmux.c | 15 ++++-
> arch/arm/dts/exynos5250.dtsi | 10 ++-
> arch/arm/include/asm/arch-exynos/clock.h | 8 ++-
> arch/arm/include/asm/arch-exynos/cpu.h | 2 +
> arch/arm/include/asm/arch-exynos/i2s-regs.h | 6 ++
> arch/arm/include/asm/arch-exynos/periph.h | 1 +
> board/samsung/dts/exynos5250-smdk5250.dts | 8 +--
> board/samsung/dts/exynos5250-snow.dts | 9 +--
> drivers/sound/max98095.c | 29 ++++----
> drivers/sound/samsung-i2s.c | 16 +++--
> drivers/sound/sound.c | 2 +-
> drivers/sound/wm8994.c | 95 +++++++++++----------------
> drivers/sound/wm8994_registers.h | 77 ++++++++++++----------
> 14 files changed, 149 insertions(+), 142 deletions(-)
>
> --
> 1.7.9.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Regards,
Rajeshwari Shinde
More information about the U-Boot
mailing list