[U-Boot] [PATCH 07/12] TI:armv7: Re-order slightly the generic CONFIG options, expand related comments

[Tom Rini]

Re-group the general options to note things that can be removed safely
to reduce binary size when not required, and expand the comment about
what commands we do include to note it could be replaced with a specific
list of required one.  While at it, move the CMD parts of various
blocks IP to the end of the list for consistency.

Signed-off-by: Tom Rini <trini at ti.com>
---
 include/configs/ti_armv7_common.h |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 1e4bca5..e89e874 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -60,12 +60,12 @@
 
 /* I2C IP block */
 #define CONFIG_I2C
-#define CONFIG_CMD_I2C
 #define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_CMD_I2C
 
 /* MMC/SD IP block */
 #define CONFIG_MMC
@@ -87,10 +87,10 @@
  * access CS0 at is 0x8000000.
  */
 #ifdef CONFIG_NAND
-#define CONFIG_CMD_NAND
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_BASE		0x8000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_CMD_NAND
 #endif
 
 /*
@@ -103,14 +103,18 @@
  * console baudrate of 115200 and use the default baud rate table.
  */
 #define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"U-Boot# "
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_ENV_VARS_UBOOT_CONFIG	/* Strongly encouraged */
+#define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
+
+/* As stated above, the following choices are optional. */
+#define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_PROMPT		"U-Boot# "
 #define CONFIG_VERSION_VARIABLE
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_BAUDRATE			115200
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS		64
@@ -123,9 +127,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
 /*
  * When we have SPI, NOR or NAND flash we expect to be making use of
  * mtdparts, both for ease of use in U-Boot and for passing information
@@ -141,7 +142,8 @@
  * useful commands.  Note that we must have set CONFIG_SYS_NO_FLASH
  * prior to this include, in order to skip a few commands.  When we do
  * have flash, if we expect these commands they must be enabled in that
- * config.
+ * config.  If desired, a specific list of desired commands can be used
+ * instead.
  */
 #include <config_cmd_default.h>
 #define CONFIG_CMD_ASKENV
-- 
1.7.9.5