[U-Boot] [PATCH] i.MX6: nitrogen6x: force HDMI onto IPU0/DI0

Eric Nelson eric.nelson at boundarydevices.com
Tue Aug 20 20:44:43 CEST 2013


Our Linux kernel switches the HDMI connector onto IPU0/DI1,
but the U-Boot display driver only supports IPU0/DI0 for the
time being.

Because of this, a soft re-boot will leave the HDMI output
connected to the wrong display port and prevent video from
being displayed.

Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
---
 board/boundary/nitrogen6x/nitrogen6x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 79ab449..1419f36 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -666,7 +666,8 @@ static void setup_display(void)
 	writel(reg, &iomux->gpr[2]);
 
 	reg = readl(&iomux->gpr[3]);
-	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
+	reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
+			|IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
 	    | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
 	       <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
 	writel(reg, &iomux->gpr[3]);
-- 
1.8.1.2



More information about the U-Boot mailing list