[U-Boot] [PATCH v2 2/7] USB: XHCI: Add xHCI host controller support for Exynos5
Vivek Gautam
gautam.vivek at samsung.com
Wed Aug 21 12:12:43 CEST 2013
This adds driver layer for xHCI controller in Samsung's
exynos5 soc. This interacts with xHCI host controller stack.
Signed-off-by: Vikas C Sajjan <vikas.sajjan at samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
Cc: Julius Werner <jwerner at chromium.org>
Cc: Simon Glass <sjg at chromium.org>
Cc: Minkyu Kang <mk7.kang at samsung.com>
Cc: Dan Murphy <dmurphy at ti.com>
Cc: Marek Vasut <marex at denx.de>
---
arch/arm/include/asm/arch-exynos/cpu.h | 8 +
arch/arm/include/asm/arch-exynos/xhci-exynos.h | 90 +++++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/xhci-exynos5.c | 324 ++++++++++++++++++++++++
include/linux/usb/dwc3.h | 190 ++++++++++++++
5 files changed, 613 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-exynos/xhci-exynos.h
create mode 100644 drivers/usb/host/xhci-exynos5.c
create mode 100644 include/linux/usb/dwc3.h
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index cb924fb..0d2b511 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -50,6 +50,8 @@
#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4_USB3PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS4X12 */
#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000
@@ -85,6 +87,8 @@
#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_USB3PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS5 Common*/
#define EXYNOS5_I2C_SPACING 0x10000
@@ -103,6 +107,8 @@
#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000
#define EXYNOS5_GPIO_PART1_BASE 0x11400000
#define EXYNOS5_MIPI_DSIM_BASE 0x11D00000
+#define EXYNOS5_USB_HOST_XHCI_BASE 0x12000000
+#define EXYNOS5_USB3PHY_BASE 0x12100000
#define EXYNOS5_USB_HOST_EHCI_BASE 0x12110000
#define EXYNOS5_USBPHY_BASE 0x12130000
#define EXYNOS5_USBOTG_BASE 0x12140000
@@ -217,7 +223,9 @@ SAMSUNG_BASE(swreset, SWRESET)
SAMSUNG_BASE(timer, PWMTIMER_BASE)
SAMSUNG_BASE(uart, UART_BASE)
SAMSUNG_BASE(usb_phy, USBPHY_BASE)
+SAMSUNG_BASE(usb3_phy, USB3PHY_BASE)
SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE)
+SAMSUNG_BASE(usb_xhci, USB_HOST_XHCI_BASE)
SAMSUNG_BASE(usb_otg, USBOTG_BASE)
SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
SAMSUNG_BASE(power, POWER_BASE)
diff --git a/arch/arm/include/asm/arch-exynos/xhci-exynos.h b/arch/arm/include/asm/arch-exynos/xhci-exynos.h
new file mode 100644
index 0000000..acbb37d
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/xhci-exynos.h
@@ -0,0 +1,90 @@
+/* Copyright (c) 2012 Samsung Electronics Co. Ltd
+ *
+ * Exynos Phy register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARCH_XHCI_EXYNOS_H_
+#define _ASM_ARCH_XHCI_EXYNOS_H_
+
+/* Phy register MACRO definitions */
+
+#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
+#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
+#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27)
+
+#define PHYUTMI_OTGDISABLE (1 << 6)
+#define PHYUTMI_FORCESUSPEND (1 << 1)
+#define PHYUTMI_FORCESLEEP (1 << 0)
+
+#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
+#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
+
+#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
+#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
+
+#define PHYCLKRST_SSC_EN (0x1 << 20)
+#define PHYCLKRST_REF_SSP_EN (0x1 << 19)
+#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18)
+
+#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
+
+#define PHYCLKRST_FSEL_MASK (0x3f << 5)
+#define PHYCLKRST_FSEL(_x) ((_x) << 5)
+#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
+#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
+#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
+#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
+
+#define PHYCLKRST_RETENABLEN (0x1 << 4)
+
+#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
+#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
+#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
+
+#define PHYCLKRST_PORTRESET (0x1 << 1)
+#define PHYCLKRST_COMMONONN (0x1 << 0)
+
+#define PHYPARAM0_REF_USE_PAD (0x1 << 31)
+#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
+#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
+
+#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
+
+#define PHYTEST_POWERDOWN_SSP (0x1 << 3)
+#define PHYTEST_POWERDOWN_HSP (0x1 << 2)
+
+#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2)
+
+#define FSEL_CLKSEL_24M (0x5)
+
+/* XHCI PHY register structure */
+struct exynos_usb3_phy {
+ unsigned int reserve1;
+ unsigned int link_system;
+ unsigned int phy_utmi;
+ unsigned int phy_pipe;
+ unsigned int phy_clk_rst;
+ unsigned int phy_reg0;
+ unsigned int phy_reg1;
+ unsigned int phy_param0;
+ unsigned int phy_param1;
+ unsigned int phy_term;
+ unsigned int phy_test;
+ unsigned int phy_adp;
+ unsigned int phy_batchg;
+ unsigned int phy_resume;
+ unsigned int reserve2[3];
+ unsigned int link_port;
+};
+
+#endif /* _ASM_ARCH_XHCI_EXYNOS_H_ */
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 6bd6c86..eb50bc1 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -44,6 +44,7 @@ COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
# xhci
COBJS-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
+COBJS-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
new file mode 100644
index 0000000..d5796c0
--- /dev/null
+++ b/drivers/usb/host/xhci-exynos5.c
@@ -0,0 +1,324 @@
+/*
+ * SAMSUNG EXYNOS5 USB HOST XHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Vivek Gautam <gautam.vivek at samsung.com>
+ * Vikas Sajjan <vikas.sajjan at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * This file is a conglomeration for DWC3-init sequence and further
+ * exynos5 specific PHY-init sequence.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
+#include <usb.h>
+#include <watchdog.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include <asm/arch/xhci-exynos.h>
+#include <asm-generic/errno.h>
+#include <linux/compat.h>
+#include <linux/usb/dwc3.h>
+
+#include "xhci.h"
+
+/* Declare global data pointer */
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * Contains pointers to register base addresses
+ * for the usb controller.
+ */
+struct exynos_xhci {
+ struct exynos_usb3_phy *usb3_phy;
+ struct xhci_hccr *hcd;
+ struct dwc3 *dwc3_reg;
+};
+
+static struct exynos_xhci exynos;
+
+#ifdef CONFIG_OF_CONTROL
+static int exynos_usb3_parse_dt(const void *blob, struct exynos_xhci *exynos)
+{
+ fdt_addr_t addr;
+ unsigned int node;
+ int depth;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_XHCI);
+ if (node <= 0) {
+ debug("XHCI: Can't get device node for xhci\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Get the base address for XHCI controller from the device node
+ */
+ addr = fdtdec_get_addr(blob, node, "reg");
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("Can't get the XHCI register base address\n");
+ return -ENXIO;
+ }
+ exynos->hcd = (struct xhci_hccr *)addr;
+
+ depth = 0;
+ node = fdtdec_next_compatible_subnode(blob, node,
+ COMPAT_SAMSUNG_EXYNOS5_USB3_PHY, &depth);
+ if (node <= 0) {
+ debug("XHCI: Can't get device node for usb3-phy controller\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Get the base address for usbphy from the device node
+ */
+ exynos->usb3_phy = (struct exynos_usb3_phy *)fdtdec_get_addr(blob, node,
+ "reg");
+ if (exynos->usb3_phy == NULL) {
+ debug("Can't get the usbphy register address\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+#endif
+
+static void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy)
+{
+ u32 reg;
+
+ /* enabling usb_drd phy */
+ set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_EN);
+
+ /* Reset USB 3.0 PHY */
+ writel(0x0, &phy->phy_reg0);
+
+ clrbits_le32(&phy->phy_param0,
+ /* Select PHY CLK source */
+ PHYPARAM0_REF_USE_PAD |
+ /* Set Loss-of-Signal Detector sensitivity */
+ PHYPARAM0_REF_LOSLEVEL_MASK);
+ setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL);
+
+ writel(0x0, &phy->phy_resume);
+
+ /*
+ * Setting the Frame length Adj value[6:1] to default 0x20
+ * See xHCI 1.0 spec, 5.2.4
+ */
+ setbits_le32(&phy->link_system,
+ LINKSYSTEM_XHCI_VERSION_CONTROL |
+ LINKSYSTEM_FLADJ(0x20));
+
+ /* Set Tx De-Emphasis level */
+ clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK);
+ setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH);
+
+ setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL);
+
+ /* PHYTEST POWERDOWN Control */
+ clrbits_le32(&phy->phy_test,
+ PHYTEST_POWERDOWN_SSP |
+ PHYTEST_POWERDOWN_HSP);
+
+ /* UTMI Power Control */
+ writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi);
+
+ /* Use core clock from main PLL */
+ reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
+ /* Default 24Mhz crystal clock */
+ PHYCLKRST_FSEL(FSEL_CLKSEL_24M) |
+ PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x88) |
+ /* Force PortReset of PHY */
+ PHYCLKRST_PORTRESET |
+ /* Digital power supply in normal operating mode */
+ PHYCLKRST_RETENABLEN |
+ /* Enable ref clock for SS function */
+ PHYCLKRST_REF_SSP_EN |
+ /* Enable spread spectrum */
+ PHYCLKRST_SSC_EN |
+ /* Power down HS Bias and PLL blocks in suspend mode */
+ PHYCLKRST_COMMONONN;
+
+ writel(reg, &phy->phy_clk_rst);
+
+ /* giving time to Phy clock to settle before resetting */
+ udelay(10);
+
+ reg &= ~PHYCLKRST_PORTRESET;
+ writel(reg, &phy->phy_clk_rst);
+}
+
+static void exynos5_usb3_phy_exit(struct exynos_usb3_phy *phy)
+{
+ setbits_le32(&phy->phy_utmi,
+ PHYUTMI_OTGDISABLE |
+ PHYUTMI_FORCESUSPEND |
+ PHYUTMI_FORCESLEEP);
+
+ clrbits_le32(&phy->phy_clk_rst,
+ PHYCLKRST_REF_SSP_EN |
+ PHYCLKRST_SSC_EN |
+ PHYCLKRST_COMMONONN);
+
+ /* PHYTEST POWERDOWN Control to remove leakage current */
+ setbits_le32(&phy->phy_test,
+ PHYTEST_POWERDOWN_SSP |
+ PHYTEST_POWERDOWN_HSP);
+
+ /* disabling usb_drd phy */
+ set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_DISABLE);
+}
+
+void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
+{
+ clrsetbits_le32(&dwc3_reg->g_ctl,
+ DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
+ DWC3_GCTL_PRTCAPDIR(mode));
+}
+
+static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
+{
+ /* Before Resetting PHY, put Core in Reset */
+ setbits_le32(&dwc3_reg->g_ctl,
+ DWC3_GCTL_CORESOFTRESET);
+
+ /* Assert USB3 PHY reset */
+ setbits_le32(&dwc3_reg->g_usb3pipectl[0],
+ DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+ /* Assert USB2 PHY reset */
+ setbits_le32(&dwc3_reg->g_usb2phycfg,
+ DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+ mdelay(100);
+
+ /* Clear USB3 PHY reset */
+ clrbits_le32(&dwc3_reg->g_usb3pipectl[0],
+ DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+ /* Clear USB2 PHY reset */
+ clrbits_le32(&dwc3_reg->g_usb2phycfg,
+ DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+ /* After PHYs are stable we can take Core out of reset state */
+ clrbits_le32(&dwc3_reg->g_ctl,
+ DWC3_GCTL_CORESOFTRESET);
+}
+
+static int dwc3_core_init(struct dwc3 *dwc3_reg)
+{
+ u32 reg;
+ u32 revision;
+ unsigned int dwc3_hwparams1;
+
+ revision = readl(&dwc3_reg->g_snpsid);
+ /* This should read as U3 followed by revision number */
+ if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
+ printf("this is not a DesignWare USB3 DRD Core\n");
+ return -1;
+ }
+
+ dwc3_core_soft_reset(dwc3_reg);
+
+ dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
+
+ reg = readl(&dwc3_reg->g_ctl);
+ reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+ reg &= ~DWC3_GCTL_DISSCRAMBLE;
+ switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
+ case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+ reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+ break;
+ default:
+ debug("No power optimization available\n");
+ }
+
+ /*
+ * WORKAROUND: DWC3 revisions <1.90a have a bug
+ * where the device can fail to connect at SuperSpeed
+ * and falls back to high-speed mode which causes
+ * the device to enter a Connect/Disconnect loop
+ */
+ if ((revision & DWC3_REVISION_MASK) < 0x190a)
+ reg |= DWC3_GCTL_U2RSTECN;
+
+ writel(reg, &dwc3_reg->g_ctl);
+
+ return 0;
+}
+
+static int exynos_xhci_core_init(struct exynos_xhci *exynos)
+{
+ int ret;
+
+ exynos5_usb3_phy_init(exynos->usb3_phy);
+
+ ret = dwc3_core_init(exynos->dwc3_reg);
+ if (ret) {
+ debug("failed to initialize core\n");
+ return -1;
+ }
+
+ /* We are hard-coding DWC3 core to Host Mode */
+ dwc3_set_mode(exynos->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
+
+ return 0;
+}
+
+static void exynos_xhci_core_exit(struct exynos_xhci *exynos)
+{
+ exynos5_usb3_phy_exit(exynos->usb3_phy);
+}
+
+int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
+{
+ struct exynos_xhci *ctx = &exynos;
+
+#ifdef CONFIG_OF_CONTROL
+ exynos_usb3_parse_dt(gd->fdt_blob, ctx);
+#else
+ ctx->usb3_phy = (struct exynos_usb3_phy *)samsung_get_base_usb3_phy();
+ ctx->hcd = (struct xhci_hccr *)samsung_get_base_usb_xhci();
+#endif
+
+ ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
+
+ exynos_xhci_core_init(ctx);
+
+ *hccr = (ctx->hcd);
+ *hcor = (struct xhci_hcor *)((uint32_t) *hccr
+ + HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+
+ debug("Exynos5-xhci: init hccr %x and hcor %x hc_length %d\n",
+ (uint32_t)*hccr, (uint32_t)*hcor,
+ (uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+
+ return 0;
+}
+
+void xhci_hcd_stop(int index)
+{
+ struct exynos_xhci *ctx = &exynos;
+
+ exynos_xhci_core_exit(ctx);
+}
diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h
new file mode 100644
index 0000000..933c894
--- /dev/null
+++ b/include/linux/usb/dwc3.h
@@ -0,0 +1,190 @@
+/* include/linux/usb/dwc3.h
+ *
+ * Copyright (c) 2012 Samsung Electronics Co. Ltd
+ *
+ * Designware SuperSpeed USB 3.0 DRD Controller global and OTG registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DWC3_H_
+#define __DWC3_H_
+
+/* Global constants */
+#define DWC3_ENDPOINTS_NUM 32
+
+#define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE
+#define DWC3_EVENT_TYPE_MASK 0xfe
+
+#define DWC3_EVENT_TYPE_DEV 0
+#define DWC3_EVENT_TYPE_CARKIT 3
+#define DWC3_EVENT_TYPE_I2C 4
+
+#define DWC3_DEVICE_EVENT_DISCONNECT 0
+#define DWC3_DEVICE_EVENT_RESET 1
+#define DWC3_DEVICE_EVENT_CONNECT_DONE 2
+#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3
+#define DWC3_DEVICE_EVENT_WAKEUP 4
+#define DWC3_DEVICE_EVENT_EOPF 6
+#define DWC3_DEVICE_EVENT_SOF 7
+#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9
+#define DWC3_DEVICE_EVENT_CMD_CMPL 10
+#define DWC3_DEVICE_EVENT_OVERFLOW 11
+
+#define DWC3_GEVNTCOUNT_MASK 0xfffc
+#define DWC3_GSNPSID_MASK 0xffff0000
+#define DWC3_GSNPSID_SHIFT 16
+#define DWC3_GSNPSREV_MASK 0xffff
+
+#define DWC3_REVISION_MASK 0xffff
+
+#define DWC3_REG_OFFSET 0xC100
+
+struct g_event_buffer {
+ u64 g_evntadr;
+ u32 g_evntsiz;
+ u32 g_evntcount;
+};
+
+struct d_physical_endpoint {
+ u32 d_depcmdpar2;
+ u32 d_depcmdpar1;
+ u32 d_depcmdpar0;
+ u32 d_depcmd;
+};
+
+struct dwc3 { /* offset: 0xC100 */
+ u32 g_sbuscfg0;
+ u32 g_sbuscfg1;
+ u32 g_txthrcfg;
+ u32 g_rxthrcfg;
+ u32 g_ctl;
+
+ u32 reserved1;
+
+ u32 g_sts;
+
+ u32 reserved2;
+
+ u32 g_snpsid;
+ u32 g_gpio;
+ u32 g_uid;
+ u32 g_uctl;
+ u64 g_buserraddr;
+ u64 g_prtbimap;
+
+ u32 g_hwparams0;
+ u32 g_hwparams1;
+ u32 g_hwparams2;
+ u32 g_hwparams3;
+ u32 g_hwparams4;
+ u32 g_hwparams5;
+ u32 g_hwparams6;
+ u32 g_hwparams7;
+
+ u32 g_dbgfifospace;
+ u32 g_dbgltssm;
+ u32 g_dbglnmcc;
+ u32 g_dbgbmu;
+ u32 g_dbglspmux;
+ u32 g_dbglsp;
+ u32 g_dbgepinfo0;
+ u32 g_dbgepinfo1;
+
+ u64 g_prtbimap_hs;
+ u64 g_prtbimap_fs;
+
+ u32 reserved3[28];
+
+ u32 g_usb2phycfg[16];
+ u32 g_usb2i2cctl[16];
+ u32 g_usb2phyacc[16];
+ u32 g_usb3pipectl[16];
+
+ u32 g_txfifosiz[32];
+ u32 g_rxfifosiz[32];
+
+ struct g_event_buffer g_evnt_buf[32];
+
+ u32 g_hwparams8;
+
+ u32 reserved4[63];
+
+ u32 d_cfg;
+ u32 d_ctl;
+ u32 d_evten;
+ u32 d_sts;
+ u32 d_gcmdpar;
+ u32 d_gcmd;
+
+ u32 reserved5[2];
+
+ u32 d_alepena;
+
+ u32 reserved6[55];
+
+ struct d_physical_endpoint d_phy_ep_cmd[32];
+
+ u32 reserved7[128];
+
+ u32 o_cfg;
+ u32 o_ctl;
+ u32 o_evt;
+ u32 o_evten;
+ u32 o_sts;
+
+ u32 reserved8[3];
+
+ u32 adp_cfg;
+ u32 adp_ctl;
+ u32 adp_evt;
+ u32 adp_evten;
+
+ u32 bc_cfg;
+
+ u32 reserved9;
+
+ u32 bc_evt;
+ u32 bc_evten;
+};
+
+/* Global Configuration Register */
+#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
+#define DWC3_GCTL_U2RSTECN (1 << 16)
+#define DWC3_GCTL_RAMCLKSEL(x) \
+ (((x) & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_CLK_BUS (0)
+#define DWC3_GCTL_CLK_PIPE (1)
+#define DWC3_GCTL_CLK_PIPEHALF (2)
+#define DWC3_GCTL_CLK_MASK (3)
+#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
+#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
+#define DWC3_GCTL_PRTCAP_HOST 1
+#define DWC3_GCTL_PRTCAP_DEVICE 2
+#define DWC3_GCTL_PRTCAP_OTG 3
+#define DWC3_GCTL_CORESOFTRESET (1 << 11)
+#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
+#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
+#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
+
+/* Global HWPARAMS1 Register */
+#define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0
+#define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
+
+/* Global USB3 PIPE Control Register */
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
+
+/* Global TX Fifo Size Register */
+#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
+#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
+
+#endif /* __DWC3_H_ */
--
1.7.6.5
More information about the U-Boot
mailing list