[U-Boot] [PATCH v4] Add Nanobone board support

Tom Rini trini at ti.com
Wed Aug 21 16:38:58 CEST 2013


On Wed, Aug 21, 2013 at 03:20:57PM +0100, Mark Jackson wrote:

> On 14/08/13 10:24, Mark Jackson wrote:
> > NanoBone Specification:
> > -----------------------
> > CPU:
> >   TI AM335x
> > 
> > Memory:
> >   256MB DDR3
> >   64MB NOR flash
> >   256MB NAND flash
> >   128KB FRAM
> > 
> > Ethernet:
> >   2 x 10/100 connected to SMSC LAN8710 PHY
> > 
> > USB:
> >   1 x USB2.0 Type A
> > 
> > I2C:
> >   2Kbit EEPROM (Microchip 24AA02)
> >   RTC (Maxim DS1338)
> >   GPIO Expander (Microchip MCP23017)
> > 
> > Expansion connector:
> >   6 x UART
> >   1 x MMC/SD
> >   1 x USB2.0
> > 
> > Signed-off-by: Mark Jackson <mpfj at newflow.co.uk>
> 
> Any comments on this board support patch ?

Needs re-basing for s_init consolidation into
arch/arm/cpu/armv7/am33xx/board.c from Heiko being merged to master,
sorry.  But otherwise looks good.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130821/dbd505f3/attachment.pgp>


More information about the U-Boot mailing list