No subject

overo/duovero_mux_data.h"

	{UART4_RX, (PTU | IEN | M0)},		/* uart4_rx */
	{UART4_TX, (M0)},					/* uart4_tx */


I changed "include/configs/omap4_common.h"

#define CONFIG_SYS_NS16550_COM3		UART3_BASE

to read

#define CONFIG_SYS_NS16550_COM3		UART4_BASE

and added the UART4_BASE definition to "arch/arm/include/asm/arch-omap4/oma=
p.h":

#define UART4_BASE		(OMAP44XX_L4_PER_BASE + 0x6e000)

this should be the correct base address for uart4 from what i understand.


However, it doesn't work. I also tried UART2 which doesn't work either. Onl=
y one that works is UART3.

I'm probably missing something critical so I figured i would ask here if an=
yone can give me a hint on how it's supposed to be done?

Regards
Daniel Malmquist=