No subject

overo/duovero_mux_data.h"

        {UART4_RX, (PTU | IEN | M0)},           /* uart4_rx */
        {UART4_TX, (M0)},                                       /* uart4_tx=
 */


I changed "include/configs/omap4_common.h"

#define CONFIG_SYS_NS16550_COM3         UART3_BASE

to read

#define CONFIG_SYS_NS16550_COM3         UART4_BASE

and added the UART4_BASE definition to "arch/arm/include/asm/arch-omap4/oma=
p.h":

#define UART4_BASE              (OMAP44XX_L4_PER_BASE + 0x6e000)

this should be the correct base address for uart4 from what i understand.


However, it doesn't work. I also tried UART2 which doesn't work either. Onl=
y one that works is UART3.

I'm probably missing something critical so I figured i would ask here if an=
yone can give me a hint on how it's supposed to be done?

Regards
Daniel Malmquist

--_000_1D33A6D946BFEE4E99E977D33497B6D8A67E7B9CEXDB6ugkthse_--